-
Notifications
You must be signed in to change notification settings - Fork 96
P&W R619AC (Qualcomm Atheros IPQ4019, OC)
backslashxx edited this page Mar 29, 2024
·
2 revisions
Device: P&W R619AC, OpenWRT 23.05.3
CONFIG_EXTRA_OPTIMIZATION="-pipe -O3 -mtune=cortex-a7"
Overclocked: 717 -> 896MHz CPU core
# uname -a
Linux R619AC 5.15.150 #0 SMP Fri Mar 22 22:09:42 2024 armv7l GNU/Linux
# mhz
count=211565 us50=12196 us250=59461 diff=47265 cpu_MHz=895.229
# cat /proc/cpuinfo
...
processor : 3
model name : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 120.13
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
Hardware : Generic DT based system
Revision : 0000
Serial : 0000000000000000
# tinymembench
tinymembench v0.4.9 (simple benchmark for memory throughput and latency)
==========================================================================
== Memory bandwidth tests ==
== ==
== Note 1: 1MB = 1000000 bytes ==
== Note 2: Results for 'copy' tests show how many bytes can be ==
== copied per second (adding together read and writen ==
== bytes would have provided twice higher numbers) ==
== Note 3: 2-pass copy means that we are using a small temporary buffer ==
== to first fetch data into it, and only then write it to the ==
== destination (source -> L1 cache, L1 cache -> destination) ==
== Note 4: If sample standard deviation exceeds 0.1%, it is shown in ==
== brackets ==
==========================================================================
C copy backwards : 220.6 MB/s (0.9%)
C copy backwards (32 byte blocks) : 809.4 MB/s (0.8%)
C copy backwards (64 byte blocks) : 815.8 MB/s (0.9%)
C copy : 845.7 MB/s (1.1%)
C copy prefetched (32 bytes step) : 925.6 MB/s (1.0%)
C copy prefetched (64 bytes step) : 974.8 MB/s (1.3%)
C 2-pass copy : 659.3 MB/s (0.6%)
C 2-pass copy prefetched (32 bytes step) : 712.5 MB/s (0.5%)
C 2-pass copy prefetched (64 bytes step) : 792.6 MB/s (0.6%)
C fill : 2421.7 MB/s (0.6%)
C fill (shuffle within 16 byte blocks) : 2428.4 MB/s (0.8%)
C fill (shuffle within 32 byte blocks) : 441.4 MB/s (0.9%)
C fill (shuffle within 64 byte blocks) : 466.6 MB/s (1.3%)
---
standard memcpy : 903.7 MB/s (0.7%)
standard memset : 2352.0 MB/s (0.7%)
---
NEON read : 1515.6 MB/s (0.5%)
NEON read prefetched (32 bytes step) : 1668.3 MB/s (0.7%)
NEON read prefetched (64 bytes step) : 1643.4 MB/s (0.7%)
NEON read 2 data streams : 449.2 MB/s (0.6%)
NEON read 2 data streams prefetched (32 bytes step) : 823.5 MB/s (0.7%)
NEON read 2 data streams prefetched (64 bytes step) : 912.0 MB/s (0.7%)
NEON copy : 907.7 MB/s (1.5%)
NEON copy prefetched (32 bytes step) : 898.9 MB/s (1.2%)
NEON copy prefetched (64 bytes step) : 977.0 MB/s (1.2%)
NEON unrolled copy : 884.4 MB/s (0.9%)
NEON unrolled copy prefetched (32 bytes step) : 922.1 MB/s (1.2%)
NEON unrolled copy prefetched (64 bytes step) : 960.0 MB/s (1.0%)
NEON copy backwards : 885.7 MB/s (1.1%)
NEON copy backwards prefetched (32 bytes step) : 871.9 MB/s (0.8%)
NEON copy backwards prefetched (64 bytes step) : 935.7 MB/s (1.5%)
NEON 2-pass copy : 823.0 MB/s (0.8%)
NEON 2-pass copy prefetched (32 bytes step) : 863.6 MB/s (0.9%)
NEON 2-pass copy prefetched (64 bytes step) : 867.3 MB/s (0.9%)
NEON unrolled 2-pass copy : 649.4 MB/s (0.6%)
NEON unrolled 2-pass copy prefetched (32 bytes step) : 630.4 MB/s (0.3%)
NEON unrolled 2-pass copy prefetched (64 bytes step) : 679.6 MB/s (0.5%)
NEON fill : 2413.9 MB/s (0.4%)
NEON fill backwards : 2420.3 MB/s (0.7%)
VFP copy : 887.1 MB/s (0.7%)
VFP 2-pass copy : 698.8 MB/s (0.6%)
ARM fill (STRD) : 2076.2 MB/s (5.6%)
ARM fill (STM with 8 registers) : 2431.9 MB/s (1.2%)
ARM fill (STM with 4 registers) : 2424.6 MB/s (0.6%)
ARM copy prefetched (incr pld) : 930.3 MB/s (1.0%)
ARM copy prefetched (wrap pld) : 922.2 MB/s (2.2%)
ARM 2-pass copy prefetched (incr pld) : 753.4 MB/s (1.1%)
ARM 2-pass copy prefetched (wrap pld) : 767.8 MB/s (0.9%)
==========================================================================
== Memory latency test ==
== ==
== Average time is measured for random memory accesses in the buffers ==
== of different sizes. The larger is the buffer, the more significant ==
== are relative contributions of TLB, L1/L2 cache misses and SDRAM ==
== accesses. For extremely large buffer sizes we are expecting to see ==
== page table walk with several requests to SDRAM for almost every ==
== memory access (though 64MiB is not nearly large enough to experience ==
== this effect to its fullest). ==
== ==
== Note 1: All the numbers are representing extra time, which needs to ==
== be added to L1 cache latency. The cycle timings for L1 cache ==
== latency can be usually found in the processor documentation. ==
== Note 2: Dual random read means that we are simultaneously performing ==
== two independent memory accesses at a time. In the case if ==
== the memory subsystem can't handle multiple outstanding ==
== requests, dual random read has the same timings as two ==
== single reads performed one after another. ==
==========================================================================
block size : single random read / dual random read
1024 : 0.0 ns / 0.1 ns
2048 : 0.0 ns / 0.1 ns
4096 : 0.0 ns / 0.0 ns
8192 : 0.0 ns / 0.0 ns
16384 : 0.0 ns / 0.0 ns
32768 : 0.0 ns / 0.0 ns
65536 : 7.0 ns / 12.4 ns
131072 : 11.5 ns / 18.0 ns
262144 : 20.6 ns / 31.9 ns
524288 : 68.8 ns / 107.1 ns
1048576 : 94.7 ns / 133.6 ns
2097152 : 114.8 ns / 151.8 ns
4194304 : 125.5 ns / 160.7 ns
8388608 : 133.5 ns / 167.9 ns
16777216 : 141.5 ns / 177.6 ns
33554432 : 152.3 ns / 198.0 ns
67108864 : 170.4 ns / 234.1 ns
Kernel 4.9.140-tegra #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019 aarch64 GNU/Linux Under xorg, no compositor active, no browser or other cpu hogs.
tinymembench v0.4.9 (simple benchmark for memory thr
==========================================================================
== Memory bandwidth tests ==
== ==
== Note 1: 1MB = 1000000 bytes ==
== Note 2: Results for 'copy' tests show how many bytes can be ==
== copied per second (adding together read and writen ==
== bytes would have provided twice higher numbers) ==
== Note 3: 2-pass copy means that we are using a small temporary buffer ==
== to first fetch data into it, and only then write it to the ==
== destination (source -> L1 cache, L1 cache -> destination) ==
== Note 4: If sample standard deviation exceeds 0.1%, it is shown in ==
== brackets ==
==========================================================================
C copy backwards : 2949.7 MB/s (3.8%)
C copy backwards (32 byte blocks) : 3011.8 MB/s
C copy backwards (64 byte blocks) : 3029.2 MB/s
C copy : 3642.2 MB/s (4.1%)
C copy prefetched (32 bytes step) : 3824.4 MB/s (0.3%)
C copy prefetched (64 bytes step) : 3825.3 MB/s (0.4%)
C 2-pass copy : 2726.2 MB/s
C 2-pass copy prefetched (32 bytes step) : 2902.6 MB/s (2.5%)
C 2-pass copy prefetched (64 bytes step) : 2928.3 MB/s (0.3%)
C fill : 8541.0 MB/s (0.2%)
C fill (shuffle within 16 byte blocks) : 8518.5 MB/s (2.1%)
C fill (shuffle within 32 byte blocks) : 8537.1 MB/s (0.1%)
C fill (shuffle within 64 byte blocks) : 8528.7 MB/s (0.2%)
---
standard memcpy : 3558.8 MB/s
standard memset : 8520.2 MB/s
---
NEON LDP/STP copy : 3633.9 MB/s (4.2%)
NEON LDP/STP copy pldl2strm (32 bytes step) : 1451.0 MB/s (0.3%)
NEON LDP/STP copy pldl2strm (64 bytes step) : 1450.9 MB/s (0.5%)
NEON LDP/STP copy pldl1keep (32 bytes step) : 3882.5 MB/s (3.9%)
NEON LDP/STP copy pldl1keep (64 bytes step) : 3884.0 MB/s (0.4%)
NEON LD1/ST1 copy : 3630.8 MB/s (0.3%)
NEON STP fill : 8537.8 MB/s
NEON STNP fill : 8544.9 MB/s (1.7%)
ARM LDP/STP copy : 3635.8 MB/s (0.3%)
ARM STP fill : 8544.8 MB/s (0.1%)
ARM STNP fill : 8549.2 MB/s (1.0%)
==========================================================================
== Framebuffer read tests. ==
== ==
== Many ARM devices use a part of the system memory as the framebuffer, ==
== typically mapped as uncached but with write-combining enabled. ==
== Writes to such framebuffers are quite fast, but reads are much ==
== slower and very sensitive to the alignment and the selection of ==
== CPU instructions which are used for accessing memory. ==
== ==
== Many x86 systems allocate the framebuffer in the GPU memory, ==
== accessible for the CPU via a relatively slow PCI-E bus. Moreover, ==
== PCI-E is asymmetric and handles reads a lot worse than writes. ==
== ==
== If uncached framebuffer reads are reasonably fast (at least 100 MB/s ==
== or preferably >300 MB/s), then using the shadow framebuffer layer ==
== is not necessary in Xorg DDX drivers, resulting in a nice overall ==
== performance improvement. For example, the xf86-video-fbturbo DDX ==
== uses this trick. ==
==========================================================================
NEON LDP/STP copy (from framebuffer) : 766.0 MB/s
NEON LDP/STP 2-pass copy (from framebuffer) : 688.8 MB/s
NEON LD1/ST1 copy (from framebuffer) : 770.6 MB/s (0.1%)
NEON LD1/ST1 2-pass copy (from framebuffer) : 681.3 MB/s (0.3%)
ARM LDP/STP copy (from framebuffer) : 766.1 MB/s
ARM LDP/STP 2-pass copy (from framebuffer) : 689.1 MB/s
==========================================================================
== Memory latency test ==
== ==
== Average time is measured for random memory accesses in the buffers ==
== of different sizes. The larger is the buffer, the more significant ==
== are relative contributions of TLB, L1/L2 cache misses and SDRAM ==
== accesses. For extremely large buffer sizes we are expecting to see ==
== page table walk with several requests to SDRAM for almost every ==
== memory access (though 64MiB is not nearly large enough to experience ==
== this effect to its fullest). ==
== ==
== Note 1: All the numbers are representing extra time, which needs to ==
== be added to L1 cache latency. The cycle timings for L1 cache ==
== latency can be usually found in the processor documentation. ==
== Note 2: Dual random read means that we are simultaneously performing ==
== two independent memory accesses at a time. In the case if ==
== the memory subsystem can't handle multiple outstanding ==
== requests, dual random read has the same timings as two ==
== single reads performed one after another. ==
==========================================================================
block size : single random read / dual random read, [MADV_NOHUGEPAGE]
1024 : 0.0 ns / 0.1 ns
2048 : 0.0 ns / 0.1 ns
4096 : 0.0 ns / 0.1 ns
8192 : 0.0 ns / 0.1 ns
16384 : 0.1 ns / 0.1 ns
32768 : 1.7 ns / 2.9 ns
65536 : 6.4 ns / 9.5 ns
131072 : 9.6 ns / 12.3 ns
262144 : 13.7 ns / 17.0 ns
524288 : 15.8 ns / 19.7 ns
1048576 : 17.3 ns / 22.1 ns
2097152 : 42.1 ns / 64.2 ns
4194304 : 98.5 ns / 138.1 ns
8388608 : 143.9 ns / 186.3 ns
16777216 : 167.2 ns / 211.2 ns
33554432 : 180.1 ns / 227.1 ns
67108864 : 200.0 ns / 260.2 ns
block size : single random read / dual random read, [MADV_HUGEPAGE]
1024 : 0.0 ns / 0.0 ns
2048 : 0.0 ns / 0.0 ns
4096 : 0.0 ns / 0.0 ns
8192 : 0.0 ns / 0.0 ns
16384 : 0.0 ns / 0.0 ns
32768 : 0.0 ns / 0.0 ns
65536 : 6.4 ns / 9.4 ns
131072 : 9.5 ns / 12.2 ns
262144 : 11.2 ns / 13.1 ns
524288 : 12.1 ns / 13.5 ns
1048576 : 12.8 ns / 13.6 ns
2097152 : 27.0 ns / 33.0 ns
4194304 : 90.6 ns / 127.8 ns
8388608 : 123.9 ns / 153.8 ns
16777216 : 139.5 ns / 161.2 ns
33554432 : 147.2 ns / 163.6 ns
67108864 : 154.0 ns / 167.6 ns