Skip to content

TPS ACL

Jump to bottom
Endi S. Dewata edited this page Feb 13, 2021 · 3 revisions

TPS ACL Definition

The default TPS ACL is defined in /usr/share/pki/tps/conf/acl.ldif. When TPS is installed, the ACL will be stored in the following entry which can be customized as needed:

dn: cn=aclResources,dc=tps,dc=pki,dc=example,dc=com
objectClass: top
objectClass: CertACLS
cn: aclResources
resourceACLS: ...
...

certServer.general.configuration

By default administrators, auditors, and agents are allowed to read CMS general configuration but only administrators are allowed to modify and delete.

  • Operations: read, modify, delete

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • allow (modify,delete) group="Administrators"

certServer.acl.configuration

By default administrators, agents and auditors are allowed to read ACL configuration but only administrators allowed to modify.

  • Operations: read, modify

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • allow (modify) group="Administrators"

certServer.log.configuration

By default administrators, agents, and auditors are allowed to read the log configuration but only administrators are allowed to modify.

  • Operations: read, modify

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • allow (modify) group="Administrators"

certServer.log.configuration.fileName

By default nobody is allowed to modify the fileName parameter.

  • Operations: read, modify

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • deny (modify) user=anybody

certServer.log.configuration.signedAudit.expirationTime (unused)

Nobody is allowed to modify the expirationTime parameter

  • Operations: read, modify

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • deny (modify) user=anybody

certServer.log.content.signedAudit

By default only auditor is allowed to read the signed audit log.

  • Operations: read

  • allow (read) group="Auditors"

certServer.log.content.system

By default administrators, auditors, and agents are allowed to read the log content.

  • Operations: read

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

certServer.log.content.transactions

By default administrators, auditors, and agents are allowed to read the log content.

  • Operations: read

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

certServer.auth.configuration

By default administrators, agents, and auditors are allowed to read authentication configuration but only administrators allowed to modify.

  • Operations: read, modify

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • allow (modify) group="Administrators"

certServer.registry.configuration

By default this ACL is shared by all admin servlets.

  • Operations: read, modify

  • allow (read) group="Administrators" || group="Auditors" || group="Token Processing Service Manager Agents"

  • allow (modify) group="Administrators"

certServer.admin.certificate

By default any user may import a certificate.

  • Operations: import

  • allow (import) user="anybody"

certServer.admin.request.enrollment

By default anybody may submit an enrollment request.

  • Operations: submit, read, execute

  • allow (submit) user="anybody"

certServer.clone.configuration

By default only Enterprise Administrators are allowed to clone the configuration.

  • Operations: read, modify

  • allow (modify,read) group="Enterprise CA Administrators" || group="Enterprise KRA Administrators" || group="Enterprise OCSP Administrators" || group="Enterprise TPS Administrators"

certServer.tps.account

By default anybody can login and logout.

  • Operations: login, logout

  • allow (login,logout) user="anybody"

certServer.tps.authenticators

By default only admins can access authenticators.

  • Operations: read, change-status, add, modify, remove

  • allow (read,change-status,add,modify,remove) group="Administrators"

certServer.tps.audit

By default only admins can access configuration.

  • Operations: read, modify

  • allow (read,modify) group="Administrators"

certServer.tps.config

By default only admins can access configuration.

  • Operations: read, modify

  • allow (read,modify) group="Administrators"

certServer.tps.connectors

By default only admins can access connectors.

  • Operations: read, change-status, add, modify, remove

  • allow (read,change-status,add,modify,remove) group="Administrators"

certServer.tps.groups

By default admins may execute group operations.

  • Operations: execute

  • allow (execute) group="Administrators"

certServer.tps.users

By default admins may execute user operations.

  • Operations: execute

  • allow (execute) group="Administrators"

certServer.tps.profiles

By default admins and agents can read and change status, but only admins can add, modify, and remove.

  • Operations: read, change-status, add, modify, remove

  • allow (read,change-status) group="Administrators" || group="TPS Agents"

  • allow (add,modify,remove) group="Administrators"

certServer.tps.profile-mappings

By default only admins can access profile mappings.

  • Operations: read, change-status, add, modify, remove

  • allow (read,change-status,add,modify,remove) group="Administrators"

certServer.tps.selftests

By default only admins can access selftests.

  • Operations: read, execute

  • allow (read,execute) group="Administrators"

certServer.tps.tokens

By default admins, agents, operators can read tokens, but only admins can add and remove tokens, and only agents can modify tokens.

  • Operations: read, add, modify, remove

  • allow (read) group="Administrators" || group="TPS Agents" || group="TPS Operators"

  • allow (add,remove) group="Administrators"

  • allow (modify) group="TPS Agents"

TPS ACL Mapping

TPS ACL mapping is stored in /usr/share/pki/tps/conf/acl.properties:

It maps REST operations to the above ACL:

account.login = certServer.tps.account,login
account.logout = certServer.tps.account,logout
audit.read = certServer.log.configuration,read
audit.modify = certServer.log.configuration,modify
audit-log.read = certServer.log.content.signedAudit,read
authenticators.read = certServer.tps.authenticators,read
authenticators.add = certServer.tps.authenticators,add
authenticators.modify = certServer.tps.authenticators,modify
authenticators.approve = certServer.tps.authenticators,approve
authenticators.remove = certServer.tps.authenticators,remove
config.read = certServer.tps.config,read
config.modify = certServer.tps.config,modify
connectors.read = certServer.tps.connectors,read
connectors.add = certServer.tps.connectors,add
connectors.modify = certServer.tps.connectors,modify
connectors.change-status = certServer.tps.connectors,change-status
connectors.remove = certServer.tps.connectors,remove
groups = certServer.tps.groups,execute
profiles.read = certServer.tps.profiles,read
profiles.add = certServer.tps.profiles,add
profiles.modify = certServer.tps.profiles,modify
profiles.approve = certServer.tps.profiles,approve
profiles.remove = certServer.tps.profiles,remove
profile-mappings.read = certServer.tps.profile-mappings,read
profile-mappings.add = certServer.tps.profile-mappings,add
profile-mappings.modify = certServer.tps.profile-mappings,modify
profile-mappings.approve = certServer.tps.profiles-mappings,approve
profile-mappings.remove = certServer.tps.profile-mappings,remove
selftests.read = certServer.tps.selftests,read
selftests.execute = certServer.tps.selftests,execute
tokens.read = certServer.tps.tokens,read
tokens.add = certServer.tps.tokens,add
tokens.modify = certServer.tps.tokens,modify
tokens.remove = certServer.tps.tokens,remove
users = certServer.tps.users,execute
Tip
 To find a page in the Wiki, enter the keywords in search field, press Enter, then click Wikis.
Clone this wiki locally