Subnetwork

Create Subnetwork

To create a SubNetwork element, follow these steps:

1. Navigate to the Communication editor.
2. Click on the Add Subnetwork button.
3. Fill in the required data and click Add.

The creation wizard for the SubNetwork allows you to set:

• name: The identifier for the subnetwork in the Communication section.
• desc: A description of this element.
• type: The type of subnetwork you are building, e.g., 8-MMS for IEC 61850.
• BitRate: The value itself and the multiplier. The Unit is always fixed to b/s.

 

Edit Subnetwork

To edit a SubNetwork element, follow these steps:

1. Navigate to the Communication editor.
2. Click on the Subnetwork you want to configure.
3. Fill in the required data and click Save.

The edit wizard for the SubNetwork allows you to set:

• name: The identifier for the subnetwork in the Communication section.
• desc: A description of this element.
• type: The type of subnetwork you are building, e.g., 8-MMS for IEC 61850.
• BitRate: The value itself and the multiplier. The Unit is always fixed to b/s.

 

Remove Subnetwork

To remove a subnetwork from the existing file, follow these steps:

1. Navigate to the Communication editor.
2. Click on the Subnetwork you want to remove.
3. Click on the delete button.

NOTE: Deleting the subnetwork will also remove all its children.