Skip to content

Commit

Permalink
use axi_lsu_dma_bridge in configuration with ahb
Browse files Browse the repository at this point in the history
  • Loading branch information
@wsipak
wsipak committed Dec 6, 2024
1 parent c38b1cd commit 62b2276
Show file tree
Hide file tree
Showing 3 changed files with 498 additions and 36 deletions.
342 changes: 342 additions & 0 deletions testbench/ahb_lsu_dma_bridge.sv
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,342 @@
// SPDX-License-Identifier: Apache-2.0
// Copyright 2024 Antmicro <www.antmicro.com>
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//

// connects LSU master (AHB) to external AXI slave and DMA slave (AHB)
module ahb_lsu_dma_bridge
#(
TAG = 1,
`include "el2_param.vh"
)
(
input clk,
input reset_l,

// AHB master interface (LSU)
input logic [2:0] m_ahb_hburst, // tied to 0
input logic m_ahb_hmastlock, // tied to 0
input logic [3:0] m_ahb_hprot, // tied to 4'b0011
input logic [31:0] m_ahb_haddr, // ahb bus address
input logic [2:0] m_ahb_hsize, // size of bus transaction (possible values 0,1,2,3)
input logic [1:0] m_ahb_htrans, // Transaction type (possible values 0,2 only right now)
input logic m_ahb_hwrite, // ahb bus write
input logic [63:0] m_ahb_hwdata, // ahb bus write data
input logic m_ahb_hsel, // this slave was selected
input logic m_ahb_hreadyin, // previous hready was accepted or not
output logic [63:0] m_ahb_hrdata, // ahb bus read data
output logic m_ahb_hreadyout, // slave ready to accept transaction
output logic m_ahb_hresp, // slave response (high indicates erro)

// AXI slave interface (lmem)
// AXI Write Channels
output logic s0_axi_awvalid,
input logic s0_axi_awready,
output logic [TAG-1:0] s0_axi_awid,
output logic [31:0] s0_axi_awaddr,
output logic [2:0] s0_axi_awsize,

output logic s0_axi_wvalid,
input logic s0_axi_wready,
output logic [63:0] s0_axi_wdata,
output logic [7:0] s0_axi_wstrb,

input logic s0_axi_bvalid,
output logic s0_axi_bready,
input logic [1:0] s0_axi_bresp,
input logic [TAG-1:0] s0_axi_bid,
// AXI Read Channels
output logic s0_axi_arvalid,
input logic s0_axi_arready,
output logic [TAG-1:0] s0_axi_arid,
output logic [31:0] s0_axi_araddr,
output logic [2:0] s0_axi_arsize,

input logic s0_axi_rvalid,
output logic s0_axi_rready,
input logic [TAG-1:0] s0_axi_rid,
input logic [63:0] s0_axi_rdata,
input logic [1:0] s0_axi_rresp,
input logic s0_axi_rlast,

// AHB slave interface (dma)
output logic [31:0] s1_ahb_haddr, // ahb bus address
output logic [2:0] s1_ahb_hburst, // tied to 0
output logic s1_ahb_hmastlock, // tied to 0
output logic [3:0] s1_ahb_hprot, // [3:1] are tied to 3'b001
output logic [2:0] s1_ahb_hsize, // size of bus transaction (possible values 0,1,2,3)
output logic [1:0] s1_ahb_htrans, // Transaction type (possible values 0,2 only right now)
output logic s1_ahb_hwrite, // ahb bus write
output logic [63:0] s1_ahb_hwdata, // ahb bus write data
input logic [63:0] s1_ahb_hrdata, // ahb bus read data
input logic s1_ahb_hready, // connect to veer's dma_hreadyout
input logic s1_ahb_hresp // slave response (high indicates erro)
);

// AXI signals for the M interface converted from AHB to AXI
logic m_axi_awvalid;
logic m_axi_awready;
logic [TAG-1:0] m_axi_awid;
logic [31:0] m_axi_awaddr;
logic [2:0] m_axi_awsize;
logic [2:0] m_axi_awprot;
logic [7:0] m_axi_awlen;
logic [1:0] m_axi_awburst;

logic m_axi_wvalid;
logic m_axi_wready;
logic [63:0] m_axi_wdata;
logic [7:0] m_axi_wstrb;
logic m_axi_wlast;

logic m_axi_bvalid;
logic m_axi_bready;
logic [1:0] m_axi_bresp;
logic [TAG-1:0] m_axi_bid;

// AXI Read Channels
logic m_axi_arvalid;
logic m_axi_arready;
logic [TAG-1:0] m_axi_arid;
logic [31:0] m_axi_araddr;
logic [2:0] m_axi_arsize;
logic [2:0] m_axi_arprot;
logic [7:0] m_axi_arlen;
logic [1:0] m_axi_arburst;

logic m_axi_rvalid;
logic m_axi_rready;
logic [TAG-1:0] m_axi_rid;
logic [63:0] m_axi_rdata;
logic [1:0] m_axi_rresp;
logic m_axi_rlast;

// AXI signals for the S1 interface converted from AXI to AHB
logic s1_axi_awvalid;
logic s1_axi_awready;
logic s1_axi_wvalid;
logic s1_axi_wready;
logic s1_axi_bvalid;
logic s1_axi_bready;
logic [1:0] s1_axi_bresp;
logic s1_axi_arvalid;
logic s1_axi_arready;
logic s1_axi_rvalid;
logic s1_axi_rready;
logic [63:0] s1_axi_rdata;
logic [1:0] s1_axi_rresp;
logic s1_axi_rlast;

// These signals are not contolled by the bridge, assign them here.
assign s0_axi_awid = m_axi_awid;
assign s0_axi_awaddr = m_axi_awaddr;
assign s0_axi_awsize = m_axi_awsize;
assign s0_axi_wdata = m_axi_wdata;
assign s0_axi_wstrb = m_axi_wstrb;
assign s0_axi_arid = m_axi_arid;
assign s0_axi_araddr = m_axi_araddr;
assign s0_axi_arsize = m_axi_arsize;

ahb_to_axi4 #(.pt(pt), .CHECK_RANGES(0)) m_ahb_to_axi (
.clk(clk),
.rst_l(reset_l),
.scan_mode('0),
.bus_clk_en(1'b1),
.clk_override('0),

// AXI Write Channels
.axi_awvalid(m_axi_awvalid),
.axi_awready(m_axi_awready),
.axi_awid(m_axi_awid[TAG-1:0]),
.axi_awaddr(m_axi_awaddr[31:0]),
.axi_awsize(m_axi_awsize[2:0]),
.axi_awprot(m_axi_awprot[2:0]),
.axi_awlen(m_axi_awlen),
.axi_awburst(m_axi_awburst),

.axi_wvalid(m_axi_wvalid),
.axi_wready(m_axi_wready),
.axi_wdata(m_axi_wdata[63:0]),
.axi_wstrb(m_axi_wstrb[7:0]),
.axi_wlast(m_axi_wlast),

.axi_bvalid(m_axi_bvalid),
.axi_bready(m_axi_bready),
.axi_bresp(m_axi_bresp[1:0]),
.axi_bid(m_axi_bid[TAG-1:0]),

// AXI Read Channels
.axi_arvalid(m_axi_arvalid),
.axi_arready(m_axi_arready),
.axi_arid(m_axi_arid[TAG-1:0]),
.axi_araddr(m_axi_araddr[31:0]),
.axi_arsize(m_axi_arsize[2:0]),
.axi_arprot(m_axi_arprot[2:0]),
.axi_arlen(m_axi_arlen),
.axi_arburst(m_axi_arburst),

.axi_rvalid(m_axi_rvalid),
.axi_rready(m_axi_rready),
.axi_rid(m_axi_rid[TAG-1:0]),
.axi_rdata(m_axi_rdata[63:0]),
.axi_rresp(m_axi_rresp[1:0]),

// AHB-LITE signals
// connect lsu master here
.ahb_haddr(m_ahb_haddr[31:0]),
.ahb_hburst(m_ahb_hburst),
.ahb_hmastlock(m_ahb_hmastlock),
.ahb_hprot(m_ahb_hprot[3:0]),
.ahb_hsize(m_ahb_hsize[2:0]),
.ahb_htrans(m_ahb_htrans[1:0]),
.ahb_hwrite(m_ahb_hwrite),
.ahb_hwdata(m_ahb_hwdata[63:0]),
.ahb_hsel('1),
.ahb_hreadyin('1),
.ahb_hrdata(m_ahb_hrdata[63:0]),
.ahb_hreadyout(m_ahb_hreadyout), // TODO
.ahb_hresp(m_ahb_hresp)
);

axi4_to_ahb #(.pt(pt)) s1_axi4_to_ahb (
.clk(clk),
.free_clk(clk),
.rst_l(reset_l),
.scan_mode('0),
.bus_clk_en('1),
.clk_override('0),
.dec_tlu_force_halt('0),

// AXI Write Channels
.axi_awvalid(s1_axi_awvalid),
.axi_awready(s1_axi_awready),
.axi_awid(m_axi_awid),
.axi_awaddr(m_axi_awaddr[31:0]),
.axi_awsize(m_axi_awsize[2:0]),
.axi_awprot(m_axi_awprot[2:0]),
.axi_wvalid(s1_axi_wvalid),
.axi_wready(s1_axi_wready),
.axi_wdata(m_axi_wdata[63:0]),
.axi_wstrb(m_axi_wstrb[7:0]),
.axi_wlast(m_axi_wlast),
.axi_bvalid(s1_axi_bvalid),
.axi_bready(s1_axi_bready),
.axi_bresp(s1_axi_bresp[1:0]),
.axi_bid(), // axi_lsu_dma_bridge doesn't have such port

// AXI Read Channels
.axi_arvalid(s1_axi_arvalid),
.axi_arready(s1_axi_arready),
.axi_arid(), // axi_lsu_dma_bridge doesn't use such port
.axi_araddr(m_axi_araddr[31:0]),
.axi_arsize(m_axi_arsize[2:0]),
.axi_arprot(m_axi_arprot[2:0]),
.axi_rvalid(s1_axi_rvalid),
.axi_rready(s1_axi_rready),
.axi_rid(), // axi_lsu_dma_bridge doesn't have such port
.axi_rdata(s1_axi_rdata[63:0]),
.axi_rresp(s1_axi_rresp[1:0]),
.axi_rlast(s1_axi_rlast),

// AHB signals
// connect s1 here
.ahb_haddr(s1_ahb_haddr),
.ahb_hburst(s1_ahb_hburst),
.ahb_hmastlock(s1_ahb_hmastlock),
.ahb_hprot(s1_ahb_hprot),
.ahb_hsize(s1_ahb_hsize),
.ahb_htrans(s1_ahb_htrans),
.ahb_hwrite(s1_ahb_hwrite),
.ahb_hwdata(s1_ahb_hwdata),
.ahb_hrdata(s1_ahb_hrdata),
.ahb_hready(s1_ahb_hready),
.ahb_hresp(s1_ahb_hresp)
);

// This is the actual bridge, implemented for AXI only.
axi_lsu_dma_bridge # (4,4) bridge(
.clk(clk),
.reset_l(reset_l),

// master read bus
.m_arvalid(m_axi_arvalid),
.m_arid(m_axi_arid),
.m_araddr(m_axi_araddr),
.m_arready(m_axi_arready),

.m_rvalid(m_axi_rvalid),
.m_rready(m_axi_rready),
.m_rdata(m_axi_rdata),
.m_rid(m_axi_rid),
.m_rresp(m_axi_rresp),
.m_rlast(m_axi_rlast),

// master write bus
.m_awvalid(m_axi_awvalid),
.m_awid(m_axi_awid),
.m_awaddr(m_axi_awaddr),
.m_awready(m_axi_awready),

.m_wvalid(m_axi_wvalid),
.m_wready(m_axi_wready),

.m_bresp(m_axi_bresp),
.m_bvalid(m_axi_bvalid),
.m_bid(m_axi_bid),
.m_bready(m_axi_bready),

// lmem
.s0_arvalid(s0_axi_arvalid),
.s0_arready(s0_axi_arready),

.s0_rvalid(s0_axi_rvalid),
.s0_rid(s0_axi_rid),
.s0_rresp(s0_axi_rresp),
.s0_rdata(s0_axi_rdata),
.s0_rlast(s0_axi_rlast),
.s0_rready(s0_axi_rready),

.s0_awvalid(s0_axi_awvalid),
.s0_awready(s0_axi_awready),

.s0_wvalid(s0_axi_wvalid),
.s0_wready(s0_axi_wready),

.s0_bresp(s0_axi_bresp),
.s0_bvalid(s0_axi_bvalid),
.s0_bid(s0_axi_bid),
.s0_bready(s0_axi_bready),

// dma
.s1_arvalid(s1_axi_arvalid),
.s1_arready(s1_axi_arready),

.s1_rvalid(s1_axi_rvalid),
.s1_rresp(s1_axi_rresp),
.s1_rdata(s1_axi_rdata),
.s1_rlast(s1_axi_rlast),
.s1_rready(s1_axi_rready),

.s1_awvalid(s1_axi_awvalid),
.s1_awready(s1_axi_awready),

.s1_wvalid(s1_axi_wvalid),
.s1_wready(s1_axi_wready),

.s1_bresp(s1_axi_bresp),
.s1_bvalid(s1_axi_bvalid),
.s1_bready(s1_axi_bready)
);

endmodule
2 changes: 0 additions & 2 deletions testbench/ahb_sif.sv
View file
Original file line number Diff line number Diff line change
Expand Up @@ -140,7 +140,6 @@ module ahb_sif (
endmodule
`endif

`ifdef RV_BUILD_AXI4
module axi_slv #(
TAGW = 1
) (
Expand Down Expand Up @@ -238,5 +237,4 @@ module axi_slv #(
end
end
endmodule
`endif

Loading

0 comments on commit 62b2276

Please sign in to comment.