Skip to content

Commit

Permalink
boards: nxp: Removing CONFIG_PINCTRL from the boards defconfig
Browse files Browse the repository at this point in the history 
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.

Signed-off-by: Emilio Benavente <[email protected]>
  • Loading branch information
@EmilioCBen
EmilioCBen committed Oct 1, 2024
1 parent 8fda052 commit c6e1668
Show file tree
Hide file tree
Showing 107 changed files with 46 additions and 74 deletions.
1 change: 0 additions & 1 deletion boards/nxp/frdm_k22f/frdm_k22f_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,6 +10,5 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
CONFIG_OSC_LOW_POWER=y
1 change: 0 additions & 1 deletion boards/nxp/frdm_k64f/frdm_k64f_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
CONFIG_OSC_EXTERNAL=y

Expand Down
1 change: 0 additions & 1 deletion boards/nxp/frdm_k82f/frdm_k82f_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,6 @@ CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_PINCTRL=y
CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
CONFIG_OSC_LOW_POWER=y
Expand Down
3 changes: 0 additions & 3 deletions boards/nxp/frdm_ke15z/frdm_ke15z_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,3 @@ CONFIG_GPIO=y

# Clock Control
CONFIG_CLOCK_CONTROL=y

# Enable pin controller
CONFIG_PINCTRL=y
3 changes: 0 additions & 3 deletions boards/nxp/frdm_ke17z/frdm_ke17z_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,3 @@ CONFIG_GPIO=y

# Clock Control
CONFIG_CLOCK_CONTROL=y

# Enable pin controller
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/frdm_ke17z512/frdm_ke17z512_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,4 +8,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
1 change: 1 addition & 0 deletions boards/nxp/frdm_kl25z/Kconfig.frdm_kl25z
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,3 +4,4 @@
config BOARD_FRDM_KL25Z
select SOC_MKL25Z4
select SOC_PART_NUMBER_MKL25Z128VLK4
select PINCTRL
1 change: 0 additions & 1 deletion boards/nxp/frdm_kl25z/frdm_kl25z_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,6 +4,5 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
CONFIG_OSC_LOW_POWER=y
1 change: 0 additions & 1 deletion boards/nxp/frdm_kw41z/frdm_kw41z_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,6 +4,5 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000
CONFIG_OSC_EXTERNAL=y
1 change: 0 additions & 1 deletion boards/nxp/frdm_mcxa156/frdm_mcxa156_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,4 +9,3 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/frdm_mcxn236/frdm_mcxn236_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y

CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y

CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_qspi_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y

CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/frdm_mcxw71/frdm_mcxw71_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -6,7 +6,6 @@

CONFIG_ARM_MPU=y
CONFIG_TRUSTED_EXECUTION_SECURE=y
CONFIG_PINCTRL=y
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/frdm_rw612/frdm_rw612_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,7 +7,6 @@
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_PINCTRL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/hexiwear/hexiwear_mk64f12_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
CONFIG_OSC_LOW_POWER=y
CONFIG_ARM_MPU=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/hexiwear/hexiwear_mkw40z4_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3,7 +3,6 @@
CONFIG_CONSOLE=y
CONFIG_RTT_CONSOLE=y
CONFIG_USE_SEGGER_RTT=y
CONFIG_PINCTRL=y
CONFIG_GPIO=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000
CONFIG_OSC_EXTERNAL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_a53_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_a53_smp_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_m4_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,4 +11,3 @@ CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_CONSOLE=y
CONFIG_XIP=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mn_evk/imx8mn_evk_mimx8mn6_a53_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mn_evk/imx8mn_evk_mimx8mn6_a53_smp_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_a53_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_a53_smp_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
3 changes: 0 additions & 3 deletions boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_adsp_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -20,6 +20,3 @@ CONFIG_CONSOLE=y

# uart console (overrides remote proc console)
CONFIG_UART_CONSOLE=y

# enable pin controller
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_m7_ddr_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,4 +11,3 @@ CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_CONSOLE=y
CONFIG_XIP=y
CONFIG_CODE_DDR=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_m7_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,4 +11,3 @@ CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_CONSOLE=y
CONFIG_XIP=y
CONFIG_CODE_ITCM=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx8mq_evk/imx8mq_evk_mimx8mq6_m4_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,4 +11,3 @@ CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_CONSOLE=y
CONFIG_XIP=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx93_evk/imx93_evk_mimx9352_a55_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -28,4 +28,3 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/imx93_evk/imx93_evk_mimx9352_m33_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2,7 +2,6 @@
# SPDX-License-Identifier: Apache-2.0

CONFIG_CLOCK_CONTROL=y
CONFIG_PINCTRL=y
CONFIG_SERIAL=y
CONFIG_UART_CONSOLE=y
CONFIG_UART_INTERRUPT_DRIVEN=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso54114/lpcxpresso54114_lpc54114_m0_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,4 +8,3 @@ CONFIG_USE_SEGGER_RTT=y
CONFIG_SERIAL=n
CONFIG_GPIO=n
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso54114/lpcxpresso54114_lpc54114_m4_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso55s06/lpcxpresso55s06_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_ARM_MPU=y

CONFIG_RUNTIME_NMI=y
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso55s16/lpcxpresso55s16_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_ARM_MPU=y

CONFIG_RUNTIME_NMI=y
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso55s28/lpcxpresso55s28_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y

Expand Down
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso55s36/lpcxpresso55s36_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_ARM_MPU=y

CONFIG_RUNTIME_NMI=y
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -5,7 +5,6 @@
#

CONFIG_GPIO=y
CONFIG_PINCTRL=y

CONFIG_RUNTIME_NMI=y

Expand Down
1 change: 0 additions & 1 deletion boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_ns_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -5,7 +5,6 @@
#

CONFIG_GPIO=y
CONFIG_PINCTRL=y

CONFIG_RUNTIME_NMI=y

Expand Down
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1010_evk/mimxrt1010_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1015_evk/mimxrt1015_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1020_evk/mimxrt1020_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1024_evk/mimxrt1024_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1040_evk/mimxrt1040_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1050_evk/mimxrt1050_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1060_evk/mimxrt1060_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1060_evk/mimxrt1060_evkb_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1062_fmurt6/mimxrt1062_fmurt6_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,6 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y

# Enable Regulators
CONFIG_REGULATOR=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1064_evk/mimxrt1064_evk_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1160_evk/mimxrt1160_evk_mimxrt1166_cm4_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1160_evk/mimxrt1160_evk_mimxrt1166_cm7_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,4 +11,3 @@ CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_FLEXSPI_CONFIG_BLOCK_OFFSET=0x400
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm4_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm7_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,4 +10,3 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1180_evk/mimxrt1180_evk_mimxrt1189_cm33_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,6 +10,5 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
# Enable TrustZone-M
CONFIG_TRUSTED_EXECUTION_SECURE=y
1 change: 0 additions & 1 deletion boards/nxp/mimxrt1180_evk/mimxrt1180_evk_mimxrt1189_cm7_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,5 +10,4 @@ CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
CONFIG_HW_STACK_PROTECTION=y
CONFIG_PINCTRL=y
CONFIG_NXP_IMXRT_BOOT_HEADER=n
1 change: 0 additions & 1 deletion boards/nxp/mimxrt595_evk/mimxrt595_evk_mimxrt595s_cm33_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,7 +7,6 @@
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_PINCTRL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
# Enable TrustZone-M
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/mimxrt685_evk/mimxrt685_evk_mimxrt685s_cm33_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,7 +7,6 @@
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_PINCTRL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
# Enable TrustZone-M
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/mr_canhubk3/mr_canhubk3_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,7 +16,6 @@ CONFIG_ARM_MPU=y
CONFIG_NOCACHE_MEMORY=y

# Drivers
CONFIG_PINCTRL=y
CONFIG_SERIAL=y
CONFIG_WATCHDOG=y

Expand Down
1 change: 0 additions & 1 deletion boards/nxp/rd_rw612_bga/rd_rw612_bga_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,7 +7,6 @@
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_PINCTRL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/rd_rw612_bga/rd_rw612_bga_rw612_ethernet_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,7 +7,6 @@
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_PINCTRL=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_GPIO=y
CONFIG_ARM_MPU=y
Expand Down
1 change: 0 additions & 1 deletion boards/nxp/rddrone_fmuk66/rddrone_fmuk66_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_GPIO=y
CONFIG_PINCTRL=y
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=160000000
CONFIG_OSC_EXTERNAL=y

Expand Down
1 change: 0 additions & 1 deletion boards/nxp/s32z2xxdc2/s32z2xxdc2_s32z270_rtu0_defconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -6,6 +6,5 @@ CONFIG_ISR_STACK_SIZE=512
CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=8000000
CONFIG_ARM_MPU=y
CONFIG_PINCTRL=y
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
Loading

0 comments on commit c6e1668

Please sign in to comment.