tests: drivers: clock: stm32 common device for sdmmc

Add a testcase for the stm32F412 or stm32F413
configuring the SDIO clock at 48MHz from the PLLI2S
Tested on the stm32f413h disco kit.

Signed-off-by: Francois Ramu <[email protected]>

tests/drivers/clock_control/stm32_clock_configuration/stm32_common_devices/boards/f4_sdmmc48_pll.overlay

@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2024 STMicroelectronics
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/* Node is disabled by default unless the PLL_I2S is enabled */
+&clk48 {
+	/* select one source for the clk48MHz domain clock */
+/*	clocks = <&rcc STM32_SRC_PLL_Q CK48M_SEL(0)>;*/
+	clocks = <&rcc STM32_SRC_PLLI2S_Q CK48M_SEL(1)>;
+	status = "okay";
+};
+
+&plli2s {
+	div-m = <4>;
+	mul-n = <96>;
+	div-q = <4>;
+	div-r = <2>;
+	clocks = <&clk_hse>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	clocks = <&rcc STM32_CLOCK(APB2, 11U)>,
+	/* select one source for the sdmmc domain clock */
+/*		 <&rcc STM32_SRC_SYSCLK SDIO_SEL(1)>; */
+		 <&rcc STM32_SRC_CK48 SDIO_SEL(0)>;
+	pinctrl-0 = <&sdio_cmd_pa6 &sdio_ck_pc12
+			&sdio_d0_pc8 &sdio_d1_pc9
+			&sdio_d2_pc10 &sdio_d3_pc11>;
+	pinctrl-names = "default";
+	status = "okay";
+};

tests/drivers/clock_control/stm32_clock_configuration/stm32_common_devices/src/test_stm32_clock_configuration_sdmmc.c

@@ -0,0 +1,130 @@
+/*
+ * Copyright (c) 2024 STMicroelectronics
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/ztest.h>
+#include <soc.h>
+#include <zephyr/drivers/clock_control.h>
+#include <zephyr/drivers/clock_control/stm32_clock_control.h>
+#include <zephyr/logging/log.h>
+
+#if DT_NODE_HAS_STATUS_OKAY(DT_NODELABEL(sdmmc1))
+
+#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_sdmmc)
+#define DT_DRV_COMPAT st_stm32_sdmmc1
+#endif
+
+#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32_clock_mux)
+#warning "Missing clock 48MHz"
+#endif
+
+#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f412_plli2s_clock)
+#warning "Missing clock I2S PLL clock"
+#endif
+
+#include "stm32_ll_rcc.h"
+
+ZTEST(stm32_common_devices_clocks, test_sdmmc_clk_config)
+{
+	static const struct stm32_pclken pclken[] = STM32_DT_CLOCKS(DT_NODELABEL(sdmmc1));
+
+	uint32_t dev_dt_clk_freq, dev_actual_clk_freq;
+	uint32_t dev_actual_clk_src;
+	int r;
+
+	/* Test clock_on(gating clock) */
+	r = clock_control_on(DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE),
+				(clock_control_subsys_t) &pclken[0]);
+	zassert_true((r == 0), "Could not enable SDMMC gating clock");
+
+	zassert_true(__HAL_RCC_SDIO_IS_CLK_ENABLED(), "SDMMC gating clock should be on");
+	TC_PRINT("SDMMC gating clock on\n");
+
+	zassert_true((DT_NUM_CLOCKS(DT_NODELABEL(sdmmc1)) > 1), "No domain clock defined in dts");
+
+	if (pclken[1].bus == STM32_SRC_CK48) {
+		/* CLK 48 is enabled through the clock-mux */
+		zassert_true(DT_NODE_HAS_STATUS_OKAY(DT_NODELABEL(clk48)), "No clock 48MHz");
+		r = 0;
+	} else if (pclken[1].bus == STM32_SRC_SYSCLK) {
+		/* Test clock_on(domain_clk) STM32_SRC_SYSCLK */
+		r = clock_control_configure(DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE),
+					(clock_control_subsys_t) &pclken[1],
+					NULL);
+	} else {
+		r = -127;
+	}
+
+	zassert_true((r == 0), "Could not enable SDMMC domain clock");
+	TC_PRINT("SDMMC domain clock configured\n");
+
+	/* Test clock source */
+	dev_actual_clk_src = __HAL_RCC_GET_SDIO_SOURCE();
+
+	if (pclken[1].bus == STM32_SRC_CK48) {
+		zassert_equal(dev_actual_clk_src, RCC_SDIOCLKSOURCE_CLK48,
+				"Expected SDMMC src: CLK 48 (0x%lx). Actual src: 0x%x",
+				RCC_SDIOCLKSOURCE_CLK48, dev_actual_clk_src);
+	} else if (pclken[1].bus == STM32_SRC_SYSCLK) {
+		zassert_equal(dev_actual_clk_src, RCC_SDIOCLKSOURCE_SYSCLK,
+				"Expected SDMMC src: SYSCLK (0x%lx). Actual src: 0x%x",
+				RCC_SDIOCLKSOURCE_SYSCLK, dev_actual_clk_src);
+	} else {
+		zassert_true(0, "Unexpected domain clk (0x%x)", dev_actual_clk_src);
+	}
+
+	/* Test get_rate(srce clk) */
+	if (pclken[1].bus == STM32_SRC_CK48) {
+		/* Get the CK48M source : PLL Q or PLLI2S Q */
+		if (LL_RCC_GetCK48MClockSource(LL_RCC_CK48M_CLKSOURCE) ==
+				LL_RCC_CK48M_CLKSOURCE_PLL) {
+			/* Get the PLL Q freq. No HAL macro for that */
+			TC_PRINT("SDMMC sourced by PLLQ at ");
+			dev_actual_clk_freq = __LL_RCC_CALC_PLLCLK_48M_FREQ(HSE_VALUE,
+							    LL_RCC_PLLI2S_GetDivider(),
+							    LL_RCC_PLLI2S_GetN(),
+							    LL_RCC_PLLI2S_GetQ()
+							    );
+		} else {
+			/* Get the I2S PLL Q freq. No HAL macro for that */
+			dev_actual_clk_freq = __LL_RCC_CALC_PLLI2S_48M_FREQ(HSE_VALUE,
+							    LL_RCC_PLLI2S_GetDivider(),
+							    LL_RCC_PLLI2S_GetN(),
+							    LL_RCC_PLLI2S_GetQ()
+							    );
+			TC_PRINT("SDMMC sourced by PLLI2SQ at ");
+		}
+
+		TC_PRINT("%d Hz\n", dev_actual_clk_freq);
+		r = 0;
+
+	} else if (pclken[1].bus == STM32_SRC_SYSCLK) {
+		dev_actual_clk_freq = HAL_RCC_GetSysClockFreq();
+		TC_PRINT(" STM32_SRC_SYSCLK at %d\n", dev_actual_clk_freq);
+	} else {
+		r = -127;
+	}
+
+	zassert_true((r == 0), "Could not get SDMMC clk srce freq");
+
+	r = clock_control_get_rate(DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE),
+				(clock_control_subsys_t) &pclken[1],
+				&dev_dt_clk_freq);
+
+	zassert_equal(dev_dt_clk_freq, dev_actual_clk_freq,
+			"Expected freq: %d Hz. Actual clk: %d Hz",
+			dev_dt_clk_freq, dev_actual_clk_freq);
+
+	TC_PRINT("SDMMC clock rate: %d Hz\n", dev_dt_clk_freq);
+
+	/* Test clock_off(gating clk) */
+	r = clock_control_off(DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE),
+				(clock_control_subsys_t) &pclken[0]);
+	zassert_true((r == 0), "Could not disable SDMMC gating clk");
+
+	zassert_true(!__HAL_RCC_SDIO_IS_CLK_ENABLED(), "SDMMC gating clk should be off");
+	TC_PRINT("SDMMC gating clk off\n");
+}
+#endif

tests/drivers/clock_control/stm32_clock_configuration/stm32_common_devices/testcase.yaml

@@ -34,3 +34,6 @@ tests:
   drivers.clock.stm32_clock_configuration.common_device.f3.i2c1_hsi:
     extra_args: DTC_OVERLAY_FILE="boards/f3_i2c1_hsi.overlay"
     platform_allow: stm32f3_disco
+  drivers.clock.stm32_clock_configuration.common_device.f4.sdmmc_48:
+    extra_args: DTC_OVERLAY_FILE="boards/f4_sdmmc48_pll.overlay"
+    platform_allow: stm32f412g_disco nucleo_f412zg