drivers: usb stm32H5 and stm32U5 have an independent power supply

The stm32H5 mcu has an independent USB supply to be enabled
at init with LL_PWR_EnableVDDUSB function like the stm32U5 serie.
Both series have PWR_USBSCR_USB33SV bit in their USBSCR POWER reg.
and other series all have PWR_CR2_USV bit in their CR2 POWER reg.

Signed-off-by: Francois Ramu <[email protected]>

drivers/usb/device/usb_dc_stm32.c

@@ -217,10 +217,13 @@ static int usb_dc_stm32_clock_enable(void)
 		return -ENODEV;
 	}
 
-#ifdef CONFIG_SOC_SERIES_STM32U5X
-	/* VDDUSB independent USB supply (PWR clock is on) */
+#ifdef PWR_USBSCR_USB33SV
+	/*
+	 * VDDUSB independent USB supply (PWR clock is on)
+	 * with LL_PWR_EnableVDDUSB function (higher case)
+	 */
 	LL_PWR_EnableVDDUSB();
-#endif /* CONFIG_SOC_SERIES_STM32U5X */
+#endif /* PWR_USBSCR_USB33SV */
 
 	if (DT_INST_NUM_CLOCKS(0) > 1) {
 		if (clock_control_configure(clk, (clock_control_subsys_t)&pclken[1],
@@ -508,7 +511,7 @@ int usb_dc_attach(void)
 
 	/*
 	 * Required for at least STM32L4 devices as they electrically
-	 * isolate USB features from VDDUSB. It must be enabled before
+	 * isolate USB features from VddUSB. It must be enabled before
 	 * USB can function. Refer to section 5.1.3 in DM00083560 or
 	 * DM00310109.
 	 */

drivers/usb/udc/udc_stm32.c

@@ -914,10 +914,13 @@ static int priv_clock_enable(void)
 		return -ENODEV;
 	}
 
-#ifdef CONFIG_SOC_SERIES_STM32U5X
-	/* VDDUSB independent USB supply (PWR clock is on) */
+#if defined(PWR_USBSCR_USB33SV)
+	/*
+	 * VDDUSB independent USB supply (PWR clock is on)
+	 * with LL_PWR_EnableVDDUSB function (higher case)
+	 */
 	LL_PWR_EnableVDDUSB();
-#endif /* CONFIG_SOC_SERIES_STM32U5X */
+#endif /* PWR_USBSCR_USB33SV */
 #if defined(CONFIG_SOC_SERIES_STM32H7X)
 	LL_PWR_EnableUSBVoltageDetector();