Merge branch 'master' of https://github.com/zearp/Nucintosh

README.md

@@ -57,7 +57,7 @@ Generate new serials with [GenSMBIOS](https://github.com/corpnewt/GenSMBIOS). Th
 \* Installers made with GibMacOS on Windows and Linux require a working internet connection as it uses the recovery image only, it then downloads the full installer from Apple. The *createistallmedia* script makes an offline installer.
 
 ## Post install
-- Remove express card icon: Run ```sudo mount -uw / && killall Finder && sudo mv /System/Library/CoreServices/Menu\ Extras/ExpressCard.menu /System/Library/CoreServices/Menu\ Extras/ExpressCard.menu.bak && sudo touch /System/Library/CoreServices/Menu\ Extras/ExpressCard.menu```
+- Remove express card icon: Run ```sudo mount -uw / && killall Finder && sudo mv /System/Library/CoreServices/Menu\ Extras/ExpressCard.menu /System/Library/CoreServices/Menu\ Extras/ExpressCard.menu.bak && sudo touch /System/Library/CoreServices/Menu\ Extras/ExpressCard.menu``` -- This no logner works on Big Sur, but you can use a cool and free app called [Hidden Bar](https://github.com/dwarvesf/hidden) to hide it with instead.
 - Please re-enable SIP if you don't need it disabled; change ```csr-active-config``` to ```00000000``` reboot and reset nvram
 - Check if TRIM is enabled, If not run ```sudo trimforce enable``` to enable it
 - Disable ```NVMeFix.kext``` if you don't have an NVMe drive
@@ -97,9 +97,11 @@ That's all!
 + To fully disable SIP you need to change ```csr-active-config``` to ```FF0F0000``` in the config, in order to remove the express card icon SIP needs to be disabled!
 + Error 66 when trying to mount / in read/write mode and/or errors about diskXs5s1 when booting, this is due to apfs snapshots;
 
-Boot into recovery and open a terminal then list the snapshots with ```diskutil apfs listSnapshots diskXs5``` and delete them with ```diskutil apfs deleteSnapshot diskXs5 -uuid UUIDHERE```.
+~~Boot into recovery and open a terminal then list the snapshots with ```diskutil apfs listSnapshots diskXs5``` and delete them with ```diskutil apfs deleteSnapshot diskXs5 -uuid UUIDHERE```.~~
 
-Replace diskX with the correct disk, if you only have one disk it will be disk1s5. The UUID is the string above each snapshot.
+~~Replace diskX with the correct disk, if you only have one disk it will be disk1s5. The UUID is the string above each snapshot.~~
+
+As of 11.1 the above no longer seems to work. Will update when I find a method that works and isn't overtly complicated.
 
 ## Apple/3rd party bluetooth and wifi
 For both 1st and 3rd party you will need a [supported](https://dortania.github.io/Wireless-Buyers-Guide/) wifi/bluetooth combo card and an adapter (see below) to convert it to M key. As far as I know compatible M key combo cards don't exist. 
@@ -108,7 +110,7 @@ For both 1st and 3rd party you will need a [supported](https://dortania.github.i
 
 1st party is my preferred option. Grab an Apple 6+12 pin to m.2 M-key [converter card](https://dortania.github.io/Wireless-Buyers-Guide/Airport.html) and go native with something like the BCM94360CS2. Please note the number of antenna connectors. Some have more than 2, so you'll have to add some antenna's and maybe even mod your case. Though there is some room under the plastic lid, it can fit internal antennas like [this](https://ae01.alicdn.com/kf/HTB1AAiAKVXXXXc4aXXXq6xXFXXX4/2pcs-Internal-Antennas-40cm-15-7-inches-IPEX-MHF4-2-4-5G-wifi-antennas-for-BCM94352Z.jpg). The lid can be removed with some strategic force and there's a hole to route the wires trough too. I would use those and leave the standard antenna's connected to the Intel module. They're very cheap and the antenna connectors on the Intel module are very fragile.
 
-One big plus of going native is that you gain HID-proxy. This means that when there is no OS running the Airport card will proxy any paired HID bluetooth devices to the machine as usb devices. This means you can enter the BIOS or boot menu using the bluetooth keyboard and mouse. This is not a feature you will find on many other cards, including the the one Intel put in here. Even expensive bluetooth cards often can not do this. But Apple has added it even in the cheap BCM943224PCIEBT2 Airport card. I've personally tested that card and it still works fine in Catalina and Big Sur by setting ```Kernel -> Patch -> 0``` to true. Big Sur will also need [a patched](https://github.com/barrykn/big-sur-micropatcher/tree/main/payloads/kexts) IO80211.kext.
+One big plus of going native is that you gain HID-proxy. This means that when there is no OS running the Airport card will proxy any paired HID bluetooth devices to the machine as usb devices. This means you can enter the BIOS or boot menu using the bluetooth keyboard and mouse. This is not a feature you will find on many other cards, including the the one Intel put in here. Even expensive bluetooth cards often can not do this. But Apple has added it even in the cheap BCM943224PCIEBT2 Airport card. I've personally tested that card and it still works fine in Catalina and Big Sur by setting ```Kernel -> Patch -> 0``` to true. Big Sur will also need [a patched](https://github.com/barrykn/big-sur-micropatcher/tree/main/payloads/kexts) IO80211.kext. See my comment [here](https://github.com/zearp/Nucintosh/issues/22#issuecomment-754167884) for more info on Big Sur and this card.
 
 Some sellers on AliExpress have converter cards that already have [the small 1.25mm pitch jst](https://github.com/zearp/Nucintosh/blob/master/Stuff/NUC8-m2adapter.jpg?raw=true) connector on it. It connects to one of the two internal usb ports. I use one without issues in my NUC. They usually list them as NUC8 compatible and cost a bit more than other converter cards.