Further TDM doc updates

doc/programming_guide/reference/i2s/i2s.rst

@@ -4,14 +4,13 @@
 |I2S| Library
 #############
 
-A software defined library that allows you to control an |I2S| (Inter-IC Sound) bus via xcore ports. |I2S| is a digital data streaming interfaces particularly appropriate for transmission of audio data. TDM is a special case of |I2S| which supports transport of more than two audio channels and is partially included in the library. The components in the library are controlled via C and can either act as |I2S| master, |I2S| slave or TDM slave.
+A software defined library that allows you to control an |I2S| (Inter-IC Sound) bus via xcore ports. |I2S| is a digital data streaming interfaces particularly appropriate for transmission of audio data. TDM is a special case of |I2S| which supports transport of more than two audio channels and is partially included in the library at this time. The components in the library are controlled via C and can either act as |I2S| master, |I2S| slave or TDM slave.
 
 .. note::
 
     TDM is only currently supported as a TDM16 slave Tx component. Expansion of this library to support master or slave Rx is possible and can be done on request.
 
-|I2S| is a protocol between two devices where one is the *master* and one is the *slave* which determines which side drives the clock lines. The protocol is made up of four signals shown
-in :ref:`i2s_wire_table`.
+|I2S| is a protocol between two devices where one is the *master* and one is the *slave* which determines who drives the clock lines. The protocol is made up of four signals shown in :ref:`i2s_wire_table`.
 
 .. _i2s_wire_table:
 
@@ -36,8 +35,7 @@ All |I2S| functions can be accessed via the ``i2s.h`` header:
    
    #include <i2s.h>
 
-TDM is a protocol between two devices similar where one is the *master* and one is the *slave* which determines which side drives the clock lines. The protocol is made up of four signals shown
-in :ref:`tdm_wire_table`.
+TDM is a protocol between two devices similar to |I2S| where one is the *master* and one is the *slave* which determines who drives the clock lines. The protocol is made up of four signals shown in :ref:`tdm_wire_table`.
 
 .. _tdm_wire_table:
 
@@ -50,7 +48,7 @@ in :ref:`tdm_wire_table`.
        - Bit clock. This is a fixed divide of the *MCLK* and is driven
          by the master.
      * - *FSYCNH*
-       - Frame synchronisation. Toggles at the start of the TDM data frame. This is driven by the master.
+       - Frame synchronization. Toggles at the start of the TDM data frame. This is driven by the master.
      * - *DATA*
        - Data line, driven by one of the slave or master depending on
          the data direction. There may be several data lines in
@@ -76,4 +74,4 @@ Currently supported TDM functions can be accessed via the ``i2s_tdm_slave.h`` he
    i2s_common.rst
    i2s_master.rst
    i2s_slave.rst
-   tdm_slave.rst
+   i2s_tdm_slave.rst

doc/programming_guide/reference/i2s/i2s_common.rst

@@ -1,4 +1,4 @@
-.. include:: ../../../substitutions.rst
+v.. include:: ../../../substitutions.rst
 
 ****************
 |I2S| Common API
@@ -8,3 +8,8 @@ The following structures and functions are used by an |I2S| master or slave inst
 
 .. doxygengroup:: hil_i2s_core
    :content-only:
+
+The following structures and functions are used by an TDM master or slave instance.
+
+.. doxygengroup:: hil_i2s_tdm_core
+   :content-only:

doc/programming_guide/reference/i2s/i2s_master.rst

@@ -12,7 +12,7 @@ The following code snippet demonstrates the basic usage of an |I2S| master devic
 .. code-block:: c
 
    #include <xs1.h>
-   #include <i2s.h>
+   #include "i2s.h"
 
    port_t p_i2s_dout[1];
    port_t p_bclk;

doc/programming_guide/reference/i2s/i2s_tdm_slave.rst

@@ -0,0 +1,59 @@
+.. include:: ../../../substitutions.rst
+
+*********
+TDM Slave
+*********
+
+TDM Slave Tx Usage
+==================
+
+The following code snippet demonstrates the basic usage of a TDM slave Tx device.
+
+.. code-block:: c
+
+   #include <xs1.h>
+   #include "i2s_tdm_slave.h"
+
+   // Setup ports and clocks
+   port_t p_bclk = XS1_PORT_1A;
+   port_t p_fsync = XS1_PORT_1B;
+   port_t p_dout = XS1_PORT_1C;
+
+   xclock_t clk_bclk = XS1_CLKBLK_1;
+
+   // Setup callbacks
+   // NOTE: See API or sln_voice examples for more on using the callbacks
+   i2s_tdm_ctx_t ctx;
+   i2s_callback_group_t i_i2s = {
+           .init = (i2s_init_t) i2s_init,
+           .restart_check = (i2s_restart_check_t) i2s_restart_check,
+           .receive = NULL,
+           .send = (i2s_send_t) i2s_send,
+           .app_data = NULL,
+   };
+
+   // Initialize the TDM slave
+   i2s_tdm_slave_tx_16_init(
+           &ctx,
+           &i_i2s,
+           p_dout,
+           p_fsync,
+           p_bclk,
+           clk_bclk,
+           0,
+           I2S_SLAVE_SAMPLE_ON_BCLK_FALLING,
+           NULL);
+
+   // Start the slave device in this thread
+   // NOTE: You may wish to launch the slave device in a different thread.  
+   //       See the XTC Tools documentation reference for lib_xcore.
+   i2s_tdm_slave_tx_16_thread(&ctx);
+
+TDM Slave Tx API
+================
+
+The following structures and functions are used to initialize and start a TDM slave Tx instance.
+
+.. doxygengroup:: hil_i2s_tdm_slave_tx16
+   :content-only:
+