Skip to content

xenit-eu/helm-alfresco

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Xenit Alfresco Helm Chart

Latest version of 'alfresco' @ Cloudsmith

This is a helm chart for installing Alfresco

Helm

Hosted By: Cloudsmith

Package repository hosting is graciously provided by Cloudsmith. Cloudsmith is the only fully hosted, cloud-native, universal package management solution, that enables your organization to create, store and share packages in any format, to any place, with total confidence.

You can install this helm chart on you K8s cluster. Keep in mind that you will need to add some --set statements for this to work:

helm install alfresco \
  --repo 'https://repo.xenit.eu/public/open-source/helm/charts/'

Or you can use it as a dependency in your requirements.yaml in your own chart.

dependencies:
  - name: alfresco
    version: 0.1.2
    repository: https://repo.xenit.eu/public/open-source/helm/charts/

Dev Requirements

Make sure you have the following installed:

Start Local Cluster

  • To start the cluster you have to create one using kind with the config file as a parameter that is under the directory kind:

    kind create cluster --config=kind/config.yaml
  • switch to kind-kind context :

    kubectl config use-context kind-kind
  • Add An ingress controller by running this command after starting the cluster:

    kubectl apply -f https://raw.githubusercontent.com/kubernetes/ingress-nginx/main/deploy/static/provider/kind/deploy.yaml
  • set up the image pull secrets like in the example and add them to the general.imagePullSecrets Example :

apiVersion: v1
kind: Secret
metadata:
  name: secretName
  namespace: {{ .Release.Namespace | quote }}
type: kubernetes.io/dockerconfigjson
data:
  .dockerconfigjson: {{- printf "{\"auths\":{\"%s\":{\"username\":\"%s\",\"password\":\"%s\",\"email\":\"%s\",\"auth\":\"%s\"}}}" <<registry>> <<username>> <<password>> (printf "%s:%s" .username .password | b64enc) | b64enc }}
  • wait for the ingress controller to be ready you can check by running this command :

    kubectl wait --namespace ingress-nginx   --for=condition=ready pod   --selector=app.kubernetes.io/component=controller  --timeout=90s
  • some the services are disabled by default to minimize the resource usage such as :

    • solr
    • transformServices
    • digitalWorkspace

    to enable them modify the values inside local-values.yaml

  • finally, run skaffold (instead of helm) and wait for the ingress controller to be ready first:

    skaffold dev

Image Requirements

This helm chart supports a lot of features like share and desktop sync. You are however yourself responsible to provide an ACS image with the correct amps installed to support these features. Please note that this helm chart is build to support the xenit open source images. These are build on the official Alfresco Images but have additional K8S support. The deployments that rely on Xenit Images are the following:

  • acs
  • share
  • postgresql
  • solr

For more information take a look at

Configuration

General

general.enterprise

  • Required: false
  • Default: true
  • Description: Whether this is an enterprise version of Alfresco. In a community version Transform Service Router, Transform Service Shared File Storage, Clustering (replica count should always have a max of 1 for ACS pods) and Digital Workspace are disabled.

general.hibernate

  • Required: false
  • Default: false
  • Description: Setting this parameter to true will set all replicas to 0 and alter the default nginx rules to redirect the normal pages to a 503 maintenance page.

general.strategy

  • Required: false
  • Default:
    type: RollingUpdate
    rollingUpdate:
      maxSurge: 1
      maxUnavailable: 0
  • Description: You can overwrite here the rollout strategy of deployments. This will be effective on ALL deployments in the helm chart that have strategy type RollingUpdate (default)

general.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to ALL deployments and statefullSets

general.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here. The secrets will be referenced in all Deployments and StatefullSets.

general.serviceType

  • Required: false
  • Default: None
  • Description: will set a serviceType on the services that are exposed via an ingress. This might be useful for example when you are working on AWS infra with an AWS ALB which requires NodePort services

general.db.username

  • Required: false
  • Default: None
  • Description: Used in the ACS and SyncService pod to access the Database and to set the username of the rootuser of the postgres (if enabled)
  • Note: If not specified the helm chart will try to reuse the value used in previous deployments. If these are not there a random user will be used.

general.db.password

  • Required: false
  • Default: None
  • Description: Used in the ACS and SyncService pod to access the Database and to set the password of the rootuser of the postgres (if enabled)
  • Note: If not specified the helm chart will try to reuse the value used in previous deployments. If these are not there a random password will be used.

general.networkPolicies.enabled

  • Required: false
  • Default: true
  • Description: A field to enabled/disable network policies.

general.cni

  • Required: false
  • Default: cilium
  • Description: A field to tell the helm chart what cni provider your cluster is using. By default we assume cilium. If this is not the case you will need to add a network policy to allow the following
  • Alfresco to access heartbeat

general.secrets.acs.selfManaged

  • Required: false
  • Default: false
  • Description: Whether or not you want to provide secrets for the helm chart yourself. This is useful when working on a prod environment and you want a secure secret solution (for example Bitnami' Sealed secrets)
  • Please note that when you enable this you are yourself responsible to provide a secret acs-secret in the namespace that you will install this chart in.
  • Secret data expected:
  GLOBAL_objectstorage.store.myS3ContentStore.value.accessKey
  GLOBAL_objectstorage.store.myS3ContentStore.value.secretKey

general.secrets.mq.selfManaged

  • Required: false
  • Default: false
  • Description: Whether or not you want to provide secrets for the helm chart yourself. This is useful when working on a prod environment and you want a secure secret solution (for example Bitnami' Sealed secrets)
  • Please note that when you enable this you are yourself responsible to provide a secret mq-secret in the namespace that you will install this chart in.
  • Secret data expected:
  ACTIVEMQ_ADMIN_LOGIN
  ACTIVEMQ_ADMIN_PASSWORD
  GLOBAL_messaging.broker.username
  GLOBAL_messaging.broker.password

general.secrets.db.selfManaged

  • Required: false
  • Default: false
  • Description: Whether or not you want to provide secrets for the helm chart yourself. This is useful when working on a prod environment and you want a secure secret solution (for example Bitnami' Sealed secrets)
  • Please note that when you enable this you are yourself responsible to provide a secret db-secret in the namespace that you will install this chart in.
  • Secret data expected:
  DB_USERNAME
  DB_PASSWORD  
  POSTGRES_USER
  POSTGRES_PASSWORD

Ingress

ingress.host

  • Required: true
  • Default: None
  • Description: The host that points to the alfresco cluster for all services besides the syncService service

ingress.syncServiceHost

  • Required: when syncService.enabled is true
  • Default: None
  • Description: The host that points to the alfresco cluster for the syncService service

ingress.ingressClass

  • Required: false
  • Default: nginx
  • Description: Reference name for the ingressClass to be used. Replacement for kubernetes.io/ingress.class annotation since it's deprecation in k8s 1.18. Set to null to allow usage of kubernetes.io/ingress.class in the ingress.ingressAnnotations dict.

ingress.ingressAnnotations

  • Required: false
  • Default:
      kubernetes.io/ingress.class: "nginx"
      cert-manager.io/cluster-issuer: "letsencrypt-production"
    
  • Description: Annotations for ingress.
  • Remarks:
    • The default value of kubernetes.io/ingress.class: "nginx" will be filtered out if the ingress.ingressClass is set (This includes the default value). The kubernetes.io/ingress.class is deprecated since k8s v1.18, but some setups still rely on it. Hence it can still be set and used if ingress.ingressClass is set to null.

ingress.additionalPaths

  • Required: false
  • Default: None
  • Remark: Do not use this to set the root/ path, that should be set by the defaultBackend
  • Example:
- path: /service-path
  pathType: Prefix
  backend:
    service:
      name: service-name
      port:
        number: service-port
  • Description: used to add more path to ingress under the same host name for new services

ingress.defaultPath.service

  • Required: true

  • Default: nginx-default-service

  • Description: the default service name that ingress will point to

    Note: root redirect on nginx: Nginx can be configured to redirect from root to a specific app through annotations.

ingress:
  host: alf1.xenit.eu
  protocol: https
  ingressAnnotations:
    nginx.ingress.kubernetes.io/app-root: /share

ingress.defaultPath.port

  • Required: true
  • Default: 30000
  • Description: the default service port that ingress will point to

ingress.defaultBackend.service

  • Required: false
  • Default: None
  • Description: Setting this value will activate defaultBackend ingress setting. This will create a default, hostname independent, catch-all rule. This might be required if, for example on AWS, when an Internal loadbalancer is used that does not adhere to the hostname specific rules.

ingress.defaultBackend.port

  • Required: false
  • Default: None
  • Description: Setting this value will activate defaultBackend ingress setting. This will create a default, hostname independent, catch-all rule. This might be required if, for example on AWS, when an Internal loadbalancer is used that does not adhere to the hostname specific rules.

ingress.blockedPaths.enabled

  • Required: false
  • Default: true
  • Description: Enable 403 handler for alfresco api solr endpoints

ingress.blockedPaths.paths

  • Required: false
  • Default:
- /alfresco/s/api/solr
- /alfresco/service/api/solr
- /alfresco/service/api/solr
- /alfresco/wcservice/api/solr
  • Description: List of paths that are blocked

ACS

acs.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

acs.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

acs.image.repository

  • Required: false
  • Default: xenit/alfresco-repository-community
  • Description: The repository of the docker image that will be used

acs.image.tag

  • Required: false
  • Default: 7.2.0
  • Description: The tag of the docker image that will be used

acs.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

acs.livenessProbe

  • Required: false
  • Default:
    httpGet:
      path: /alfresco/api/-default-/public/alfresco/versions/1/probes/-live-
      port: 8080
      scheme: HTTP
    failureThreshold: 1
    initialDelaySeconds: 130
    periodSeconds: 20
    successThreshold: 1
    timeoutSeconds: 10
  • Description: Specify the livenessProbe configuration for acs

acs.customLivenessProbe

  • Required: false
  • Default: None
  • Description: Specify a custom livenessProbe configuration for acs (for example to replace httpGet with exec).
  • When this is defined, acs.livenessProbe is ignored.

acs.readinessProbe

  • Required: false
  • Default:
    httpGet:
      path: /alfresco/api/-default-/public/alfresco/versions/1/probes/-ready-
      port: 8080
      scheme: HTTP
    failureThreshold: 6
    initialDelaySeconds: 60
    periodSeconds: 20
    successThreshold: 1
    timeoutSeconds: 10
  • Description: Specify the readinessProbe configuration for acs

acs.customReadinessProbe

  • Required: false
  • Default: None
  • Description: Specify a custom readinessProbe configuration for acs (for example to replace httpGet with exec).
  • When this is defined, acs.readinessProbe is ignored.

acs.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

acs.dbUrl

  • Required: false
  • Default: jdbc:postgresql://postgresql:5432/alfresco
  • Description: Must be overwritten to point to your DB if you are not using the provided postgresql

acs.dbDriver

  • Required: false
  • Default: org.postgresql.Driver
  • Description: If you use another kind of DB then postgres you must specify the driver that needs to be used here

acs.sharePort

  • Required: false
  • Default: 443
  • Description: Set to overwrite the share port

acs.shareProtocol

  • Required: false
  • Default: https
  • Description: Set to overwrite the share protocol

acs.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

acs.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the acs-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
- secretRef:
    name: s3-secret

acs.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the acs deployment

acs.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the acs service

acs.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

acs.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "2Gi"
      cpu: "2"
  • Description: The resources a node should keep reserved for your pod

acs.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

acs.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

acs.additionalVolumeMounts

  • Required: false
  • Default: None
  • Description: A list of configMaps that need to be mounted as volumes to the alfresco pods. Make sure the configMap specified exists. Layout should be as follows:
      - mountPath: >-
          /usr/local/tomcat/shared/classes/alfresco/extension/subsystems/Authentication/ldap-ad/oup-ad1	
        name: ldap1-ad-auth-volume	
        readOnly: true	
      - mountPath: >-	
          /usr/local/tomcat/shared/classes/alfresco/extension/subsystems/Authentication/ldap-ad/oup-ad2	
        name: ldap2-ad-auth-volume	
        readOnly: true	
      - mountPath: >-	
          /usr/local/tomcat/shared/classes/alfresco/extension/subsystems/Authentication/ldap-ad/oup-ad3	
        name: ldap3-ad-auth-volume	
        readOnly: true

acs.additionalVolumes

  • Required: false
  • Default: None
  • Description: A list of configMaps that need to be mounted as volumes to the alfresco pods. Make sure the configMap specified exists. Layout should be as follows:
      - configMap:
          defaultMode: 420
          items:
            - key: ldap-ad-authentication.properties
              path: ldap-ad-authentication.properties
          name: ldap1-ad-auth-config
        name: ldap1-ad-auth-volume
      - configMap:
          defaultMode: 420
          items:
            - key: ldap-ad-authentication.properties
              path: ldap-ad-authentication.properties
          name: ldap2-ad-auth-config
        name: ldap2-ad-auth-volume
      - configMap:
          defaultMode: 420
          items:
            - key: ldap-ad-authentication.properties
              path: ldap-ad-authentication.properties
          name: ldap3-ad-auth-config
        name: ldap3-ad-auth-volume

acs.ingress.enabled

  • Required: false
  • Default: true
  • Description: this will enable/disable the ingress for the acs-service. By default this rule will forward calls to /alfresco to acs-service:30000

acs.initContainers

  • Required: false
  • Default: empty
  • Example
      initContainers:
        - name: init-fs
          image: "busybox:1.35.0"
          imagePullPolicy: IfNotPresent
          resources:
            requests:
              memory: "50Mi"
            limits:
              memory: "100Mi"
          command: [ "sh", "-c", "chown -R 33031:1000 /opt/data" ]
  • Description: add field of init containers to acs deployment

Digital Workspace

digitalWorkspace.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the digital workspace

digitalWorkspace.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

digitalWorkspace.image.registry

  • Required: false
  • Default: quay.io
  • Description: The registry where the docker container can be found in

digitalWorkspace.image.repository

  • Required: false
  • Default: alfresco/alfresco-digital-workspace
  • Description: The repository of the docker image that will be used

digitalWorkspace.image.tag

  • Required: false
  • Default: 2.4.2-adw
  • Description: The tag of the docker image that will be used

digitalWorkspace.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

digitalWorkspace.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

digitalWorkspace.basePath

  • Required: false
  • Default: /workspace
  • Description: Specify the basepath where the digital workspace can be reached

digitalWorkspace.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

digitalWorkspace.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the digitalWorkspace-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

digitalWorkspace.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Digital Workspace deployment

digitalWorkspace.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Digital Workspace service

digitalWorkspace.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

digitalWorkspace.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "256Mi"
      cpu: "150m"
  • Description: The resources a node should keep reserved for your pod

digitalWorkspace.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

digitalWorkspace.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

digitalWorkspace.ingress.enabled

  • Required: false
  • Default: true
  • Description: this will enable/disable the ingress for the digitalWorkspaceService. By default this rule will forward calls to .Values.digitalWorkspace.basePath to digital-workspace-service:30200

Share

share.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the share

share.mergeAcsShare

  • Required: false
  • Default: false
  • Description: If set to true the Share container will be installed inside the ACS pod.

share.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

share.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

share.image.repository

  • Required: false
  • Default: alfresco-share-community
  • Description: The repository of the docker image that will be used

share.image.tag

  • Required: false
  • Default: 7.2.0
  • Description: The tag of the docker image that will be used

share.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

share.livenessProbe.failureThreshold

  • Required: false
  • Default: 1
  • Description: Specify the livenessProbe failure thresh hold fp how many consecutive failure before it stops probing

share.livenessProbe.initialDelaySeconds

  • Required: false
  • Default: 130
  • Description: Specify the livenessProbe initial delay before it starts probing

share.livenessProbe.periodSeconds

  • Required: false
  • Default: 20
  • Description: Specify the livenessProbe period between probes

share.livenessProbe.successThreshold

  • Required: false
  • Default: 1
  • Description: Specify the livenessProbe success thresh hold for how many consecutive successes for the probe to be considered successful after having failed

share.livenessProbe.timeoutSeconds

  • Required: false
  • Default: 10
  • Description: Specify the livenessProbe timeout for probes to be considered as failure

share.readinessProbe.failureThreshold

  • Required: false
  • Default: 6
  • Description: Specify the readinessProbe failure thresh hold fp how many consecutive failure before it stops probing

share.readinessProbe.initialDelaySeconds

  • Required: false
  • Default: 60
  • Description: Specify the readinessProbe initial delay before it starts probing

share.readinessProbe.periodSeconds

  • Required: false
  • Default: 20
  • Description: Specify the readinessProbe period between probes

share.readinessProbe.successThreshold

  • Required: false
  • Default: 1
  • Description: Specify the readinessProbe success thresh hold for how many consecutive successes for the probe to be considered successful after having failed

share.readinessProbe.timeoutSeconds

  • Required: false
  • Default: 10
  • Description: Specify the readinessProbe timeout for probes to be considered as failure

share.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

share.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

share.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the share-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

share.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Share deployment

share.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Share service

share.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

share.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "256Mi"
      cpu: "0.5"
  • Description: The resources a node should keep reserved for your pod

share.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

share.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

share.ingress.enabled

  • Required: false
  • Default: true
  • Description: this will enable/disable the ingress for alfresco share. By default this rule will forward calls to /share to share-service:30100

Active MQ

mq.adminLogin

  • Required: false
  • Default: None
  • Description: Sets the username of the admin user of the MQ
  • Note: If not specified the helm chart will try to reuse the value used in previous deployments. If these are not there a random login will be used.

mq.adminPassword

  • Required: false
  • Default: None
  • Description: Sets the password of the admin user of the MQ
  • Note: If not specified the helm chart will try to reuse the value used in previous deployments. If these are not there a random password will be used.

mq.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Active MQ

mq.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

mq.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

mq.image.repository

  • Required: false
  • Default: alfresco/alfresco-activemq
  • Description: The repository of the docker image that will be used

mq.image.tag

  • Required: false
  • Default: 5.16.1
  • Description: The tag of the docker image that will be used

mq.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

mq.strategy.type

  • Required: false
  • Default: Recreate
  • Description: Can be set to RollingUpdate if you want to create pod before killing existing pod

mq.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

mq.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the mq-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

mq.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Active MQ deployment

mq.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Active MQ service

mq.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

mq.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "512Mi"
      cpu: "0.5"
  • Description: The resources a node should keep reserved for your pod

mq.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

mq.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

mq.additionalVolumes

  • Required: false
  • Default: None
  • Description: A list of additional volumes for the mq pods. Example:
      - name: activemq-data-1
        persistentVolumeClaim:
          claimName: alfresco-pvc-1

mq.additionalVolumeMounts

  • Required: false
  • Default: None
  • Description: A list of additional volume mounts for the mq pods. Example:
      - name: activemq-data-1
        mountPath: /mountpath
        subPath: subpath

Postgresql

postgresql.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the PostgresQl

postgresql.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

postgresql.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

postgresql.image.repository

  • Required: false
  • Default: xenit/postgres
  • Description: The repository of the docker image that will be used

postgresql.image.tag

  • Required: false
  • Default: latest
  • Description: The tag of the docker image that will be used

postgresql.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

postgresql.strategy.type

  • Required: false
  • Default: Recreate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

postgresql.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

postgresql.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the postgresql-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

postgresql.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the PostgresQl deployment

postgresql.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the PostgresQl service

postgresql.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

postgresql.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "1Gi"
      cpu: "1"
  • Description: The resources a node should keep reserved for your pod

postgresql.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

postgresql.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

SOLR

solr.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Solr

solr.replicas

  • Required: false

  • Default: 2

  • Description: The number of pods that will be running

  • solr.podManagementPolicy

  • Required: false

  • Default: Parallel

  • Description: The way to manage multiple pod launching or termination possible values are Parallel or OrderedReadyfind more information in Docs

solr.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

solr.image.repository

  • Required: false
  • Default: xenit/alfresco-solr6-xenit
  • Description: The repository of the docker image that will be used

solr.image.tag

  • Required: false
  • Default: 2.0.6
  • Description: The tag of the docker image that will be used

solr.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

solr.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to OnDelete if you want your statefulSet controller to no automatically update the pods

solr.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

solr.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Solr deployment

solr.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Solr service

solr.enforceZoneAntiAffinity

  • Required: false
  • Default: false
  • Description: If true, this option enforces a pod anti-affinity on the Solr pods based on the zones. I.e. if true, each Solr pod will require a unique zone. Starting more pods than zones will put the remainder pods in a Pending state.
    Please note that switching off the anti-affinity does not alter the anti-affinity of the already running pods!

solr.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

solr.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "4Gi"
      cpu: "1"
  • Description: The resources a node should keep reserved for your pod

solr.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

solr.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

solr.autoBackup.enabled

  • Required: false
  • Default: false
  • Description:
    • Enable or disable the Solr auto backup job , it will create a cron job that calls solr to start a backup snapshot.
    • backup repository environment variables needs to be set if enabled:
     - JAVA_OPTS_S3_ENDPOINT=-DS3_ENDPOINT=<endpoint_s3_protocol>
     - JAVA_OPTS_S3_REGION=-DS3_REGION=<bucket_s3_region>
     - JAVA_OPTS_S3_BUCKET_NAME=-DS3_BUCKET_NAME=<bucket_name>
     - JAVA_OPTS_AWS_ACCESS_KEY_ID=-Daws.accessKeyId=<access_key>
     - JAVA_OPTS_AWS_SECRET_ACCESS_KEY=-Daws.secretKey=<secret_key>

solr.autoBackup.cron

  • Required: false
  • Default: 0 * * * *
  • Description: if solr.autoBackup.enabled is true then a cron job will be created with this value as its cron

solr.autoBackup.backupUrl

  • Required: false

Default: http://solr-service:30300/solr/alfresco/replication?command=backup&repository=s3&location=s3:///&numberToKeep=3

  • Description: if solr.autoBackup.enabled is true then a cron job will be created that will curl this url

solr.readinessProbe.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the job readiness probe

solr.readinessProbe.failureThreshold

  • Required: false
  • Default: 3
  • Description: Specify the readinessProbe failure thresh hold fp how many consecutive failure before it stops probing

solr.readinessProbe.initialDelaySeconds

  • Required: false
  • Default: 30
  • Description: Specify the readinessProbe initial delay before it starts probing

solr.readinessProbe.periodSeconds

  • Required: false
  • Default: 10
  • Description: Specify the readinessProbe period between probes

solr.readinessProbe.successThreshold

  • Required: false
  • Default: 1
  • Description: Specify the readinessProbe success thresh hold for how many consecutive successes for the probe to be considered successful after having failed

solr.readinessProbe.timeoutSeconds

  • Required: false
  • Default: 10
  • Description: Specify the readinessProbe timeout for probes to be considered as failure

Transform Services

transformServices.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Transform Services

transformServices.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here. they will be referenced in all transform services Deployments.

Shared File Store

transformServices.sharedFileStore.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Shared File Store

transformServices.sharedFileStore.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

transformServices.sharedFileStore.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

transformServices.sharedFileStore.image.repository

  • Required: false
  • Default: alfresco/alfresco-shared-file-store
  • Description: The repository of the docker image that will be used

transformServices.sharedFileStore.image.tag

  • Required: false
  • Default: 0.16.1
  • Description: The tag of the docker image that will be used

transformServices.sharedFileStore.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

transformServices.sharedFileStore.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

transformServices.sharedFileStore.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    scheduler.cleanup.interval: "10800000"
    scheduler.content.age.millis: "43200000"
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

transformServices.sharedFileStore.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the sharedFileStore-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

transformServices.sharedFileStore.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Transform Services deployment

transformServices.sharedFileStore.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Transform Services service

transformServices.sharedFileStore.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

transformServices.sharedFileStore.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "512Mi"
      cpu: "200mi"
  • Description: The resources a node should keep reserved for your pod

transformServices.sharedFileStore.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

transformServices.sharedFileStore.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

transformServices.sharedFileStore.initVolumes

  • Required: false
  • Default: true
  • Description: Enable or disable the setting of /tmp/Alfresco owner to sfs user

Transform Core All In One

transformServices.transformCoreAio.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Transform Core All In One

transformServices.transformCoreAio.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

transformServices.transformCoreAio.image.registry

  • Required: false
  • Default: docker.io
  • Description: The registry where the docker container can be found in

transformServices.transformCoreAio.image.repository

  • Required: false
  • Default: alfresco/alfresco-transform-core-aio
  • Description: The repository of the docker image that will be used

transformServices.transformCoreAio.image.tag

  • Required: false
  • Default: latest
  • Description: The tag of the docker image that will be used

transformServices.transformCoreAio.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

transformServices.transformCoreAio.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

transformServices.transformCoreAio.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
      livenessPercent: "150"
      livenessTransformPeriodSeconds: "600"
      maxTransforms: "100000"
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

transformServices.transformCoreAio.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the transformCoreAio-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

transformServices.transformCoreAio.livenessProbe.enabled

  • Required: false
  • Default: true
  • Description: will enable liveness and readiness probes
    additional settings can be added through additionalEnvironmentVariables.
  livenessPercent: "150"
  livenessTransformPeriodSeconds: "600"
  maxTransforms: "100000"

transformServices.transformCoreAio.podAnnotations

  • Required: false
  • Default: None
  • Example:
       prometheus.io/path: actuator/prometheus
       prometheus.io/scrape: 'true'
  • Description: With this list of parameters you can add 1 or multiple annotations to the Transform Core All In One

transformServices.transformCoreAio.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Transform Core All In One service

transformServices.transformCoreAio.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

transformServices.transformCoreAio.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "256Mi"
      cpu: "150m"
  • Description: The resources a node should keep reserved for your pod

transformServices.transformCoreAio.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

transformServices.transformCoreAio.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

Transform Router

transformServices.transformRouter.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Transform Router

transformServices.transformRouter.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

transformServices.transformRouter.image.registry

  • Required: false
  • Default: quay.io
  • Description: The registry where the docker container can be found in

transformServices.transformRouter.image.repository

  • Required: false
  • Default: alfresco/alfresco-transform-router
  • Description: The repository of the docker image that will be used

transformServices.transformRouter.image.tag

  • Required: false
  • Default: 1.5.2
  • Description: The tag of the docker image that will be used

transformServices.transformRouter.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

transformServices.transformRouter.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

transformServices.transformRouter.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

transformServices.transformRouter.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the transformRouter-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

transformServices.transformRouter.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Transform Router deployment

transformServices.transformRouter.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Transform Router service

transformServices.transformRouter.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

transformServices.transformRouter.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "128Mi"
      cpu: "100m"
  • Description: The resources a node should keep reserved for your pod

transformServices.transformRouter.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

transformServices.transformRouter.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

Sync Service

syncService.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the Sync Service

syncService.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

syncService.image.registry

  • Required: false
  • Default: quay.io
  • Description: The registry where the docker container can be found in

syncService.image.repository

  • Required: false
  • Default: alfresco/service-sync
  • Description: The repository of the docker image that will be used

syncService.image.tag

  • Required: false
  • Default: 3.4.0
  • Description: The tag of the docker image that will be used

syncService.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

syncService.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

syncService.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

syncService.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the syncService-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

syncService.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Sync Service deployment

syncService.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Sync Service service

syncService.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

syncService.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "512Mi"
      cpu: "0.5"
  • Description: The resources a node should keep reserved for your pod

syncService.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node### Sync Service

syncService.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

Office Online Integration(OOI)

ooi.enabled

  • Required: false
  • Default: false
  • Description: Enable or disable the Office Online Integration

ooi.replicas

  • Required: false
  • Default: 1
  • Description: The number of pods that will be running

ooi.image.registry

  • Required: false
  • Default: quay.io
  • Description: The registry where the docker container can be found in

ooi.image.repository

  • Required: false
  • Default: alfresco/alfresco-ooi-service
  • Description: The repository of the docker image that will be used

ooi.image.tag

  • Required: false
  • Default: 1.1.2
  • Description: The tag of the docker image that will be used

ooi.imagePullPolicy

  • Required: false
  • Default: IfNotPresent
  • Description: Specify when the pods should pull the image from the repositories

ooi.strategy.type

  • Required: false
  • Default: RollingUpdate
  • Description: Can be set to Recreate if you want all your pods to be killed before new ones are created

ooi.additionalEnvironmentVariables

  • Required: false
  • Default: None
  • Example:
    environmentVariable1Key: environmentVariable1Value
    environmentVariable2Key: environmentVariable2Value
  • Description: With this list of parameters you can add 1 or multiple environment variables that will be passed to the docker container. These will be stored in a config and are hence not safe for sensitive information

ooi.envFrom

  • Required: false
  • Default: None
  • Description: This allows you to add to the ooi-container envFrom section. This was added to allow to integrate secrets that are not added by this helm chart.
  • Example:
  - secretRef:
    name: s3-secret

ooi.podAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Office Online Integration deployment

ooi.serviceAnnotations

  • Required: false
  • Default: None
  • Example:
    annotation1Key: annotation1Value
    annotation2Key: annotation2Value
  • Description: With this list of parameters you can add 1 or multiple annotations to the Office Online Integration service

ooi.serviceAccount

  • Required: false
  • Default: None
  • Description: If your pods need to run with a service account you can specify that here. Please note that you are yourself responsible to create the serviceAccount referenced in the namespace of this helm chart

ooi.resources.requests

  • Required: false
  • Default:
    requests:
      memory: "128Mi"
      cpu: "100m"
  • Description: The resources a node should keep reserved for your pod

ooi.resources.limits

  • Required: false
  • Default: None
  • Description: The maximum resources a pod may consume from a node

ooi.imagePullSecrets

  • Required: false
  • Default: None
  • Example:
      - name: privateDockerRepo1Secret
      - name: privateDockerRepo2Secret
  • Description: If you use an image that is not public. then you can create dockerconfigjson secrets on your cluster and reference them here.

ooi.ingress.enabled

  • Required: false
  • Default: true
  • Description: this will enable/disable the ingress for the ooi-service. By default this rule will forward calls to /ooi-service to ooi-service:30500

Persistent Storage

Alfresco

persistentStorage.alfresco.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the creation of a PV and PVC for the ACS pods

persistentStorage.alfresco.storageClassName

  • Required: false
  • Default: scw-bssd
  • Description: Provide what storageClass should be used. For values other then scw-bssd standard or efs-storage-class you will need to make sure that that storage class is created

persistentStorage.alfresco.storage

  • Required: false
  • Default: 3
  • Description: The size in GB of the volume that should be reserved

persistentStorage.alfresco.efs.volumeHandle

  • Required: when persistentStorage.alfresco.storageClassName is scw-bssd
  • Default: None
  • Description: The volume handle pointing to the AWS EFS location

persistentStorage.alfresco.additionalClaims

  • Required: false
  • Default: None
  • Description: A list of additional volume claims that can be added to the alfresco pods. Layout should be as follows:
      - name: name1
        mountPath: /apps/example
        subPath: subPath/example
        storageClassName: "standard"
        storage: 2
        efs:
          volumeHandle: "efs-identifier"

Postgres

persistentStorage.postgres.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the creation of a PV and PVC for the PostgresQL pods

persistentStorage.postgres.storageClassName

  • Required: false
  • Default: scw-bssd
  • Description: Provide what storageClass should be used. For values other then scw-bssd standard or efs-storage-class you will need to make sure that that storage class is created

persistentStorage.postgres.storage

  • Required: false
  • Default: 2
  • Description: The size in GB of the volume that should be reserved

persistentStorage.postgres.efs.volumeHandle

  • Required: when persistentStorage.postgres.storageClassName is scw-bssd
  • Default: None
  • Description: The volume handle pointing to the AWS EFS location

SOLR

persistentStorage.solr.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the creation of a PV and PVC for the SOLR pods

persistentStorage.solr.storageClassName

  • Required: false
  • Default: scw-bssd
  • Description: Provide what storageClass should be used. For values other then scw-bssd standard or efs-storage-class you will need to make sure that that storage class is created

persistentStorage.solr.storage

  • Required: false
  • Default: 3
  • Description: The size in GB of the volume that should be reserved

persistentStorage.solr.efs.volumeHandle

  • Required: when persistentStorage.solr.storageClassName is scw-bssd
  • Default: None
  • Description: The volume handle pointing to the AWS EFS location

SOLR BACKUP

persistentStorage.solrBackup.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the creation of a PV and PVC for the SOLR BACKUP for SOLR pods

persistentStorage.solrBackup.storageClassName

  • Required: false
  • Default: scw-bssd
  • Description: Provide what storageClass should be used. For values other then scw-bssd standard or efs-storage-class you will need to make sure that that storage class is created

persistentStorage.solrBackup.storage

  • Required: false
  • Default: 3
  • Description: The size in GB of the volume that should be reserved

persistentStorage.solrBackup.efs.volumeHandle

  • Required: when persistentStorage.solrBackup.storageClassName is scw-bssd
  • Default: None
  • Description: The volume handle pointing to the AWS EFS location

Shared File Store

persistentStorage.sharedFileStore.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the creation of a PV and PVC for the Shared File Store pods

persistentStorage.sharedFileStore.storageClassName

  • Required: false
  • Default: scw-bssd
  • Description: Provide what storageClass should be used. For values other then scw-bssd standard or efs-storage-class you will need to make sure that that storage class is created

persistentStorage.sharedFileStore.storage

  • Required: false
  • Default: 3
  • Description: The size in GB of the volume that should be reserved

persistentStorage.sharedFileStore.efs.volumeHandle

  • Required: when persistentStorage.sharedFileStore.storageClassName is scw-bssd
  • Default: None
  • Description: The volume handle pointing to the AWS EFS location

Active MQ

persistentStorage.mq.enabled

  • Required: false
  • Default: true
  • Description: Enable or disable the creation of a PV and PVC for the Active MQ pods

persistentStorage.mq.initVolumes

  • Required: false
  • Default: true
  • Description: Enable or disable the setting of mq data owner to amq user

persistentStorage.mq.storageClassName

  • Required: false
  • Default: scw-bssd
  • Description: Provide what storageClass should be used. For values other then scw-bssd standard or efs-storage-class you will need to make sure that that storage class is created

persistentStorage.mq.storage

  • Required: false
  • Default: 3
  • Description: The size in GB of the volume that should be reserved

persistentStorage.mq.efs.volumeHandle

  • Required: when persistentStorage.mq.storageClassName is scw-bssd
  • Default: None
  • Description: The volume handle pointing to the AWS EFS location

persistentStorage.mq.additionalClaims

  • Required: false
  • Default: None
  • Description: A list of additional volume claims that can be added to the mq pods. Layout should be as follows:
      - name: name1
        mountPath: /apps/example
        subPath: subPath/example
        storageClassName: "standard"
        storage: 2
        efs:
          volumeHandle: "efs-identifier"