verup and ...

- firmware: isp: Fix handling of different YUV colour spaces

- firmware: poe_hat: Actually close the I2C handle

- firmware: platform: Define DVFS modes and change default to be fixed AVS voltage

- firmware: arm_loader: Auto-select 64-bit for kernel8.img
  See: #1193

- firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun

- firmware: platform: Define DVFS modes and change default to be fixed AVS voltage

- firmware: arm_loader: Auto-select 64-bit for kernel8.img
  See: #1193

- firmware: hdmi: Throttle auto-i2c register writes to avoid PWM audio underrun

- firmware: video_decode lockup handling

- firmware: isp: Initialise extras to avoid vpitch being random

- firmware: usb: Fix dropouts with USB ethernet gadget
  See: raspberrypi/linux#4084

- firmware: imx477: Allow long exposures for the binned modes.
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=297521

- firmware: arm_dispmanx: Use ALPHA_MIX flag
  See: https://www.raspberrypi.org/forums/viewtopic.php?t=300769

- firmware: power: Refactor the interface to the PMICs

- firmware: platform: vl805: Get BAR2 address from PCIe BAR2 registers

- firmware: arm_loader: Return all borrowed DMA channels
  See: #1541

- firmware: hdmi_2711: Rework I2C driver to NOT use the AUTO-I2C block

- firmware: gencmd: Allow groups of clocks/plls to be read together

- firmware: power: Fix DA9090 under-voltage detection

- firmware: NVME boot support

- firmware: brfs: Fix USB bulk-read in start.elf
  See: Hexxeh/rpi-firmware#258

- firmware: hdmi_2711_i2c: Correct handling of start/stop codes for long read
  See: #1548

- firmware: video_decode: For VC1/WMV with no signalled header bytes, use start of 1st buffer
  See: raspberrypi/linux#4113

- firmware: vl805: Remove redundant log statement and fix warning

- firmware: power: Fix DA9090 ADC1 register definition

- firmware: arm_loader: Only report clocks arm has set, not siblings

- firmware: arm_loader: Don't report clocks set as turbo side effect of arm clock

- firmware: arm_loader: 2711: gpu clocks are not dependant

- firmware: platform: Need to clear cached versions of get_max_clock_internal vars

- firmware: Move core to PLLA and support accurate clk108
  See: xbmc/xbmc#19263

- firmware: board_info: Separate memory size from OTP field encoding

- firmware: power: Swap DA9090 ADC assignments to match XR77004

- firmware: board-info: Fix memsize on 3B+

- firmware: vcfw/power: Add a new latch for power_pad_control
  See: #1552

- firmware: arm_loader: kernel_old=1 should force kernel_address=0
  See: #1561

- firmware: scalerlib: Fix offset applied to x coordinate of YUV10COL image
  See: https://forum.kodi.tv/showthread.php?tid=361164&pid=3024654#pid3024654

- firmware: isp: Ensure the VRF is locked when setting up video colour denoise
  See: raspberrypi/rpicam-apps#19

- firmware: isp: Remove custom EV mappings from camera tunings

- firmware: Add support for board-type=0xXX conditional filters in bootloader, bootcode and firmware

- firmware: Two UART1 patches
  See: #1566

- firmware: Pi400: Reduce MII clock freq when probing ethernet PHY

- firmware: platform: Remove build-time constant for MICROVOLTS_PER_PIP

- firmware: dt-blob.dts: Correct HDMI HPD and EMMC_ENABLE for CM4
  See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&p=1858516

- firmware: vcfw/hdmi: CUSTOM modes used for FKMS didn't set RGB quant range correctly
  See: #1580

- firmware: PoE+ HAT support
  See: raspberrypi/linux#4367

- firmware: arm_loader: Use Pi4 bootloader MAC_ADDRESS if set

- firmware: platform: Apply ARM thermal throttling rules on BCM2711

- firmware: bcm_host: Recognise all Pi 4 variants, add BCM2711
  See: raspberrypi/userland#695

- firmware: video_decode: Use the ISP instead of vc_image_convert

- firmware: hdmi-2711: Wait for HDMI hardware scheduler to activate in HDMI mode

- arm_loader: Add message to release firmware framebuffer

- firmware: arm_loader: Add rng-seed DT property
  See: #1595

- firmware: isp: Set the YUV420/YVU420 format stride to 64 byte

- firmware: Revert: video_decode: Use the ISP instead of vc_image_convert

- firmware: cec: Avoid sending messages with kms
  See: raspberrypi/linux#4460

- firmware: hdmi_cec: Remove TX/RX SW_INIT on power_on
  See: Hexxeh/rpi-firmware#267
  See: https://www.raspberrypi.org/forums/viewtopic.php?p=1895082#p1895082

- firmware: arm_dt: Limit CMA to 256MB if total_mem < 2GB or gpu_mem > 256MB
  See: #1603

- firmware: video_decode: Use the ISP instead of vc_image_convert

- firmware: video_decode: Correct support for YVU formats using ISP

- firmware: firmware: Disable VLL loading from file system
  See: #1605

- firmware: arm_loader: Make most arm clock requests required
  See: #1598

- firmware: arm_loader: Consider required flags from GET_CLOCK_RATE
  See: #1598

- firmware: arm_dt: Load overlays for detected cameras

- firmware: Make more use of the user-warnings DT property

- firmware: hdmi_2711: Use HDMI block REPEAT_PIXEL instead of PV
  See: https://forum.libreelec.tv/thread/24415-le-10-beta-for-i4-force-hdmi-resolution

- firmware: DSI display autodetection for kms

- firmware: arm_loader: Allow hvs interrupt during SET_NOTIFY_DISPLAY_DONE

- firmware: arm_display: Allow null buffer in successful call
  See: raspberrypi/linux#4540

- firmware: video_decode: Ensure all buffers are flushed before port disable completes

- firmware: filesystem: sdcard: Fix Hybrid GPT partitions
  See: #1465

- firmware: tvservice: Add check to warn when running with kms

- firmware: arm_loader: Allow non-optional reads of current clock
  See: #1619

- firmware: dispmanx: Demote null eptr from vcos_verify to no warning
  See: raspberrypi/linux#4592

- firmware: filesystem: sdcard: Probe FAT type in GPT ESD partitions

- firmware: clock-2711: Limit PLLB VCO frequency to the high range

- firmware: arm_dt: Export the boot-mode, partition and usb state via device-tree
  See: #1621

- firmware: video_decode: i/p port enable/disable without o/p active could stall
  See: RPi-Distro/vlc#48
  See: Hexxeh/rpi-firmware#272
  See: #1637

- firmware: userland: Reduce debug_sym error messages
  See: https://forums.raspberrypi.com/viewtopic.php?f=98&t=322238

- firmware: arm_dt: Increase maximum line length to 98
  See: raspberrypi/linux#4638

- firmware: arm_loader: Allow VEC clock to be controlled by arm

- firmware: platform: Remove licence on VP6, VP8, Theora, and FLAC
  See: raspberrypi/linux#4661

- firmware: ISP: Fix magenta colour in right hand image of stereo pair
  See: https://forums.raspberrypi.com/viewtopic.php?t=321089

- firmware: platform: Fix incorrect turbo voltage scaling on Pi0
  See: raspberrypi/documentation#2255

- firmware: platform: Declare CM4's SIO_1V8_SEL and SD_PWR_ON
  See: raspberrypi/Raspberry-Pi-OS-64bit#188

- firmware: hello_fft: Update outdated link to V3D spec

- firmware: hello_fft: Remove unused function declaration
  See: #1645
  See: raspberrypi/userland#710

- firmware: dtoverlay: Rebase aliases in overlays like labels

- firmware: isp: Set core/vpu min clock to 320Mhz during ISP operation

- firmware: arm_loader: Enable watchdog early if wanted
  See: #1651

- firmware: board_info: Add upstream dtb names for cm1 & 3

- firmware: board_info: Add upstream dtb name for cm4
  See: #1660

- firmware: platform: Allow users to disable camera boot HMAC check
  See: #1657

- firmware: clock: 2711: Fix potential API issue in 2711 VCO setup

- firmware: arm_loader: Enable USB MSD boot mode on Zero 2 W

- firmware: isp: Fix Rec.709 colour space problems

build/rpi/config_pkgver

@@ -1 +1 @@
-config_deb_version=9.5
+config_deb_version=10