Skip to content

wmnsk/go-m3ua

Repository files navigation

go-m3ua

Simple M3UA protocol implementation in the Go programming language.

CI status golangci-lint Go Reference GitHub

Quickstart

Installation

Run go mod tidy in your project's directory to collect the required packages automatically.

This project follows the Release Policy of Go.

*Non-Linux machines are NOT supported, as this package relies much on github.com/ishidawataru/sctp.

Trying Examples

Working examples are available in examples directory. Just executing the following commands, you can see the client and server setting up M3UA connection.

# Run Server first
cd examples/server
go run m3ua-server.go

// Run Client then
cd examples/client
go run m3ua-client.go

There is also an example for Point Code format conversion, which works like this;

$ ./pc-conv -raw 1234 -variant 3-8-3
2023/04/05 06:07:08 PC successfully converted.
        Raw: 1234, Formatted: 0-154-2, Variant: 3-8-3
$ 
$ ./pc-conv -str 1-234-5 -variant 4-3-7
2023/04/05 06:07:08 PC successfully converted.
        Raw: 29957, Formatted: 1-234-5, Variant: 4-3-7

For Developers

The API design is kept as similar as possible to other protocols in standard net package. To establish M3UA connection as client/server, you can use Dial() and Listen()/Accept() without caring about the underlying SCTP association, as go-m3ua handles it together with M3UA ASPSM & ASPTM procedures.

Here is an example to develop your own M3UA client using go-m3ua.

First, you need to create *Config used to setup/maintain M3UA connection.

config := m3ua.NewClientConfig(
    &m3ua.HeartbeatInfo{
        Enabled:  true,
        Interval: time.Duration(3 * time.Second),
        Timer:    time.Duration(10 * time.Second),
    },
    0x11111111, // OriginatingPointCode
    0x22222222, // DestinationPointCode
    1,          // AspIdentifier
    params.TrafficModeLoadshare, // TrafficModeType
    0,                     // NetworkAppearance
    0,                     // CorrelationID
    []uint32{1, 2},        // RoutingContexts
    params.ServiceIndSCCP, // ServiceIndicator
    0, // NetworkIndicator
    0, // MessagePriority
    1, // SignalingLinkSelection
)
// set nil on unnecessary paramters.
config.CorrelationID = nil

Then, prepare network addresses and context and try to connect with Dial().

// setup SCTP peer on the specified IPs and Port.
raddr, err := sctp.ResolveSCTPAddr("sctp", SERVER_IPS)
if err != nil {
    log.Fatal(err)
}

ctx := context.Background()
ctx, cancel := context.WithCancel(ctx)
defer cancel()

conn, err := m3ua.Dial(ctx, "m3ua", nil, raddr, config)
if err != nil {
    log.Fatalf("Failed to dial M3UA: %s", err)
}
defer conn.Close()

Now you can Read() / Write() data from/to the remote endpoint.

if _, err := conn.Write(d); err != nil {
    log.Fatalf("Failed to write M3UA data: %s", err)
}
log.Printf("Successfully sent M3UA data: %x", d)

buf := make([]byte, 1500)
n, err := conn.Read(buf)
if err != nil {
    log.Fatal(err)
}

log.Printf("Successfully read M3UA data: %x", buf[:n])

See example/server directory for server example.

Supported Features

Messages

Class Message Supported Notes
Transfer Payload Data Message (DATA) Yes RFC4666#3.3
SSNM Destination Unavailable (DUNA) Yes RFC4666#3.4
Destination Available (DAVA) Yes
Destination State Audit (DAUD) Yes
Signalling Congestion (SCON) Yes
Destination User Part Unavailable (DUPU) Yes
Destination Restricted (DRST) Yes
ASPSM ASP Up Yes RFC4666#3.5
ASP Up Acknowledgement (ASP Up Ack) Yes
ASP Down Yes
ASP Down Acknowledgement (ASP Down Ack) Yes
Heartbeat (BEAT) Yes
Heartbeat Acknowledgement (BEAT Ack) Yes
RKM Registration Request (REG REQ) RFC4666#3.6
Registration Response (REG RSP)
Deregistration Request (DEREG REQ)
Deregistration Response (DEREG RSP)
ASPTM ASP Active Yes RFC4666#3.7
ASP Active Acknowledgement (ASP Active Ack) Yes
ASP Inactive Yes
ASP Inactive Acknowledgement (ASP Inactive Ack) Yes
MGMT Error Yes RFC4666#3.8
Notify Yes

Parameters

Type Parameters Supported Notes
Common INFO String Yes
Routing Context Yes
Diagnostic Information Yes
Heartbeat Data Yes
Traffic Mode Type Yes
Error Code Yes
Status Yes
ASP Identifier Yes
M3UA-specific Network Appearance Yes
User/Cause Yes
Congestion Indications Yes
Concerned Destination Yes
Routing Key Yes
Registration Result Yes
Deregistration Result Yes
Local Routing Key Identifier Yes
Destination Point Code Yes
Service Indicators Yes
Originating Point Code List Yes
Protocol Data Yes
Registration Status Yes
Deregistration Status Yes

Disclaimer

This is still experimental project. In some part, the behavior is not fully compliant with RFC, and some of the features are not even implemented yet.

Also note that some exported APIs may be changed without any notice before first release (v1.0.0).

Author

Yoshiyuki Kurauchi (Website)

LICENSE

MIT

About

M3UA implementation in pure Golang.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages