P3

Platform 3 (P3)

P3 cars include V40II, V40XC, S60II, S60CC, V60, V60CC, XC60, V70III, XC70II, S80II models 2007 to 2017

For platform 3 cars please use the p3 branch!

This Guide assumes you have created the Teensy 4 can transceiver device!

1. Download the P3 branch.
2. open the code in the Arduino ide environment.
3. select your board and upload.
4. plug Special Usb cable into teensy if using external power for the device
5. Plug device into cars OBD2 port.
6. let the code run until it spits out your pin via the usb serial COM port

Special P3 Notes

These crack differently to the P1 and P2 cars, the serial output can be a bit more confusing and some p3 cems cant seem to stay in programming mode, this means it will regularly have to re-initialise programming mode, some users have read this cem on the bench which has meant the cem stays in programming mode for some reason, speeding up the crack, bench setup information is being written and will be available soon!