Nginx module to use SPNEGO+GSSAPI+Kerberos for HTTP authentication

This module implements Kerberos authentication through GSSAPI for nginx. It currently DOES NOT support NTLMSSP.

Prerequisites

Please note that Kerberos Authentication over a GSS-enabled HTTP virtual host from a Windows client works only if the following conditions are met:

• The client machine is joined to a Windows 2003 or greater domain
• The user is logged on to the domain
• The GSS-enabled virtual host is HTTPS
• The GSS-enabled virtual host name falls under the Intranet or Trusted sites IE security zone
• The GSS-enabled virtual host name exists in the DNS as an A record
• You have created the correct Service Principal Names (SPNs) in Active Directory, mapped to a service account

Authentication has been tested with (at least) the following:

• Nginx 1.2.6
• Internet Explorer 8.0.7600.16385
• Firefox 10.0.6
• Chrome 20.0.1132.57
• Curl 7.19.5 (GSS-Negotiate), 7.27.0 (SPNEGO/fbopenssl)

The underlying kerberos library used for these tests was MIT KRB5 v1.8.

Installation

Download nginx source Extract them to a directory Clone this module into the directory

Follow the nginx install documentation, extract this module zipball and pass an --add-module option to nginx' configure:

./configure --add-module=spnego-http-auth-nginx-module-master

We've also made available a pre-built nginx-spnego package for OpenSuSE.

Ubuntu 12.04 LTS packages for the latest version of Nginx compiled with the SPNEGO module are available in this PPA.

Crash course to Windows KDC Configuration

On the AD side, you need to:

• Create a new user, whose name should be the service name you'll be using Kerberos authentication on. E.g. app.example.

• Set the "User cannot change password" and "Password never expires" options on the account

• Set a strong password on it

• From a Windows cmd.exe window, generate the service principals and keytabs for this user. You need an SPN named host/foo.example.com, and another named HTTP/foo.example.com. It is crucial that foo.example.com is the DNS name of your web site in the intranet, and it is an A record. Given that app.example is the account name you created, you would execute:

    C:\> ktpass -princ host/[email protected] -mapuser
    EXAMPLECOM\app.example -pass * -out host.keytab -ptype KRB5_NT_PRINCIPAL
  
    C:\> ktpass -princ HTTP/[email protected] -mapuser
    EXAMPLECOM\app.example -pass * -out http.keytab -ptype KRB5_NT_PRINCIPAL
  

• Verify that the correct SPNs are created:

    C:\> setspn -Q */foo.example.com
  

  it should yield both the HTTP/ and host/ SPNs, both mapped to the app.example user.

Crash course to UNIX KRB5 and nginx configuration

• Verify that your UNIX machine is using the same DNS server as your DC, most likely it'll use the DC itself.

• Create an /etc/krb5.conf configuration file, replacing the realm and kdc host names with your own AD setup:

    [libdefaults]
      default_tkt_enctypes = arcfour-hmac-md5
      default_tgs_enctypes = arcfour-hmac-md5
      default_keytab_name  = FILE:/etc/krb5.keytab
      default_realm        = EXAMPLE.COM
      ticket_lifetime      = 24h
      kdc_timesync         = 1
      ccache_type          = 4
      forwardable          = false
      proxiable            = false
  
    [realms]
      EXAMPLE.COM = {
          kdc            = dc.example.com
          admin_server   = dc.example.com
          default_domain = example.com
      }
  
    [domain_realm]
      .kerberos.server = EXAMPLE.COM
      .example.com     = EXAMPLE.COM
  

• Copy the two keytab files (host.keytab and http.keytab) created with ktpass on Windows to your UNIX machine.

• Create a krb5.keytab using ktutil, concatenating together the two SPNs keytabs:

    # ktutil
    ktutil:  rkt host.keytab
    ktutil:  rkt http.keytab
    ktutil:  wkt /etc/krb5.keytab
    ktutil:  quit
  

• Verify that the created keytab file has been built correctly:

    # klist -kt /etc/krb5.keytab
    Keytab name: WRFILE:/etc/krb5.keytab
    KVNO Timestamp         Principal
    ---- ----------------- --------------------------------------------------------
    9 02/19/13 04:02:48 HTTP/[email protected]
    8 02/19/13 04:02:48 host/[email protected]
  

  Key version numbers (KVNO) will be different in your case.

• Verify that you are able to authenticate using the keytab, without password:

    # kinit -5 -V -k -t /etc/krb5.keytab HTTP/foo.example.com
    Authenticated to Kerberos v5
  
    # klist
    Ticket cache: FILE:/tmp/krb5cc_0
    Default principal: HTTP/[email protected]
  
    Valid starting     Expires            Service principal
    02/19/13 17:37:42  02/20/13 03:37:40  krbtgt/[email protected]
            renew until 02/20/13 17:37:42
  

• Make the keytab file accessible only by root and the nginx group:

    # chmod 440 /etc/krb5.keytab
    # chown root:nginx /etc/krb5.keytab
  

• Configure a SPNEGO-protected location in the nginx configuration file:

    server {
      server_name foo.example.com;
  
      ssl on;
      ssl_certificate     example.com.crt;
      ssl_certificate_key example.com.crt;
  
      location / {
        root /some/where;
        index index.html;
        auth_gss on;
        auth_gss_realm EXAMPLE.COM;
        auth_gss_keytab /etc/krb5.keytab;
        auth_gss_service_name HTTP;
      }
    }
  

  The SPN will be built as follows:

    $auth_gss_service_name / $server_name @ $auth_gss_realm
  

  In the above example, it'll be HTTP/[email protected]. You can specify a fully-qualified SPN in the auth_gss_service_name configuration option, in this case the server_name won't be added automatically.

Debugging

The module prints all sort of debugging information if nginx is compiled with the --with-debug option, and the error_log directive has a debug level.

Look for the my_gss_name in the log to ensure it is correct, and look for the output of the gss_acquire_cred return value first. If it passes, then your keytabs configuration is correct.

Then, look for the gss_accept_sec_context log: if the "input token" is NTLMSSP means that the browser has sent an NTLM hash, that is not currently supported by this module.

A great improvement would be to port over the mod_auth_ntlm_winbind using Samba's auth_ntlm helper over to nginx. If you can do that, please do :-). We'll work on it in the future anyway.

Configuration reference

You can configure GSS authentication on a per-location basis:

• auth_gss: on/off, for ease of unsecuring while leaving other options in the config file
• auth_gss_realm: Kerberos realm name
• auth_gss_keytab: absolute path-name to keytab file containing service credentials
• auth_gss_service_name: service principal name to use when acquiring credentials.

These directives are for now they location specific - there is currently no way to specify main or per server defaults, improvements are more than welcome.

TODO

• Add support for NTLMSSP
• Fix memory leaks
• Security auditing
• More useful logging

History

Michael Shadle paid YoctoPetaBorg from RentACoder to develop this extension as ngx_http_auth_sso_module. Michael then renamed it to ngx_http_auth_spnego_module. This initial module provided spnego support using Microsoft's sample spnegohelp files. Since then, SPNEGO support has made its way into various GSS/Kerberos libraries.

Various other people have contributed minor patches to make the extension work in their environments.

Eventually, @vjt spent a night to make this work for IFAD, and then wrote this comprehensive README. :-)

Provenance

The initial codebase was a fork of Apache's mod_auth_gss_krb5 0.0.5 ported to nginx.