Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Mention lowest possible value of SetOption32 #1431

Merged
merged 1 commit into from
Nov 26, 2024
+3 −1
Merged

Mention lowest possible value of SetOption32 #1431

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
4 changes: 3 additions & 1 deletion docs/Blinds-and-Shutters.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -233,7 +233,9 @@ Parameters are optional. When missing, all subsequent parameters are set to `dis
ESP32 only:
`<p0..h>` can be optional extended with a dedicated position of the tilt if a venetian blind is configured and supported. The position of the tilt can be added after the normal position with a `/` as seperator. This is optional. Example: `shutterbutton1 1 100/-90 50/0 75/-90 100 - - 1 1`. Tilt and position also support increment or decrement position from current state with `--`oder `++`.

By a button single press the shutter is set to position `<p1>`. Double press will drive the shutter to position `<p2>` and triple press to position `<p3>`. Holding the button for more than the `SetOption32` time sets the shutter position to `<ph>` max if button is hold until position. If the hold button is released during the shutter moves the shutter will stop. Any button action `<p1>` to `<ph>` can be disabled by setting the parameter to `-`. Independent from configuration `<p1>` to `<ph>` any press of the button while the shutter is moving will immediately stop the shutter.
By a button single press the shutter is set to position `<p1>`. Double press will drive the shutter to position `<p2>` and triple press to position `<p3>`. Holding the button for more than the `SetOption32` time sets the shutter position to `<ph>` max if button is hold until position. If the hold button is released during the shutter moves the shutter will stop. Any button action `<p1>` to `<ph>` can be disabled by setting the parameter to `-`. Independent from configuration `<p1>` to `<ph>` any press of the button while the shutter is moving will immediately stop the shutter.

Ensure that you set a value higher than 5 for `SetOption32` (0.6 seconds is the minimum possible time). Lower values will not trigger the hold action for `ShutterButton`, and the shutter will not move.

Global steering of all your shutters at home is supported by additional MQTT broadcast. By any button action a corresponding MQTT command can be initiated to the `<grouptopic>` of the device. For single press this can be enabled by `<m1>` equal to `1`, disabling is indicated by `-`. Double to hold MQTT configurations are given by `<m2>` to `<mh>`, correspondingly. When `<mi>` is equal to `-` only `cmnd/<grouptopic>/Shutterposition<x> <p1..h>` is fired. When `<mi>` is equal to `1`, `<x>`=`1..4` is used to control any shutter number of a Tasmota device having same `<grouptopic>`.

Expand Down