Merge pull request #448 from mhlong10/longm-post-processor

Adding inch versions of VCarve post processors.

Resources/Post-Processors/VCarve/G2Core_Arcs_inch.pp

@@ -0,0 +1,187 @@
++================================================
++                                                
++ Vectric machine output configuration file for
++ g2core.
++                                                
++================================================
++                                                
++ History                                        
++                                                  
++ Who      When       What                         
++ ======== ========== ===========================
++ MattL    05/07/2019 Written from grbl_mm.pp
++                     added descriptive header
++ MattL    01/25/2020 Inch version
++ ======== ========== ===========================
+
+POST_NAME = "G2Core Arcs (inch) (*.gcode)"
+
+FILE_EXTENSION = "gcode"
+
+UNITS = "INCHES"
+
++------------------------------------------------
++    Line terminating characters                 
++------------------------------------------------
+
+LINE_ENDING = "[13][10]"
+
++------------------------------------------------
++    Block numbering                             
++------------------------------------------------
+
+LINE_NUMBER_START     = 0
+LINE_NUMBER_INCREMENT = 10
+LINE_NUMBER_MAXIMUM = 999999
+
++================================================
++                                                
++    Formatting for variables                     
++                                                
++================================================
+
+VAR LINE_NUMBER = [N|A|N|1.0]
+VAR POWER = [P|C|S|1.0|10.0]
+VAR SPINDLE_SPEED = [S|A|S|1.0]
+VAR FEED_RATE = [F|C|F|1.1]
+VAR X_POSITION = [X|C|X|1.4]
+VAR Y_POSITION = [Y|C|Y|1.4]
+VAR Z_POSITION = [Z|C|Z|1.4]
+VAR ARC_CENTRE_I_INC_POSITION = [I|A|I|1.4]
+VAR ARC_CENTRE_J_INC_POSITION = [J|A|J|1.4]
+VAR X_HOME_POSITION = [XH|A|X|1.4]
+VAR Y_HOME_POSITION = [YH|A|Y|1.4]
+VAR Z_HOME_POSITION = [ZH|A|Z|1.4]
+
++================================================
++                                                
++    Block definitions for toolpath output       
++                                                
++================================================
+
++---------------------------------------------------
++  Commands output at the start of the file
++---------------------------------------------------
+
+begin HEADER
+
+"( [TP_FILENAME] )"
+"( File created: [DATE] - [TIME])"
+"( for g2core from Vectric )"
+"( Material Size)"
+"( X= [XLENGTH], Y= [YLENGTH], Z= [ZLENGTH])"
+"([FILE_NOTES])"
+"(Tools used in this file: )"
+"([TOOLS_USED])"
+"T1"
+"G17"
+"G20"
+"G90"
+"G0[ZH]"
+"G0[XH][YH]"
+
+
++---------------------------------------------------
++  Command output after the header to switch spindle on
++---------------------------------------------------
+
+begin SPINDLE_ON
+
+"[S]M3"
+
+
++---------------------------------------------------
++  Commands output for rapid moves 
++---------------------------------------------------
+
+begin RAPID_MOVE
+
+"G0[X][Y][Z]"
+
+
++---------------------------------------------------
++  Commands output for the first feed rate move
++---------------------------------------------------
+
+begin FIRST_FEED_MOVE
+
+"G1[X][Y][Z][P][F]"
+
+
++---------------------------------------------------
++  Commands output for feed rate moves
++---------------------------------------------------
+
+begin FEED_MOVE
+
+"G1[X][Y][Z][P]"
+
+
++---------------------------------------------------
++  Commands output for the first clockwise arc move
++---------------------------------------------------
+
+begin FIRST_CW_ARC_MOVE
+
+"G2[X][Y][I][J][F][P]"
+
+
++---------------------------------------------------
++  Commands output for clockwise arc  move
++---------------------------------------------------
+
+begin CW_ARC_MOVE
+
+"G2[X][Y][I][J]"
+
+
++---------------------------------------------------
++  Commands output for the first counterclockwise arc move
++---------------------------------------------------
+
+begin FIRST_CCW_ARC_MOVE
+
+"G3[X][Y][I][J][F][P]"
+
+
++---------------------------------------------------
++  Commands output for counterclockwise arc  move
++---------------------------------------------------
+
+begin CCW_ARC_MOVE
+
+"G3[X][Y][I][J]"
+
++---------------------------------------------------
++  Commands output when the jet is turned on
++---------------------------------------------------
+
+begin JET_TOOL_ON
+
+"M4[P]"
+
++---------------------------------------------------
++  Commands output when the jet is turned off
++---------------------------------------------------
+
+begin JET_TOOL_OFF
+
+"M5"
+
++---------------------------------------------------
++  Commands output when the jet power is changed
++---------------------------------------------------
+
+begin JET_TOOL_POWER
+"[P]"
+
++---------------------------------------------------
++  Commands output at the end of the file
++---------------------------------------------------
+
+begin FOOTER
+
+"M5"
+"G0[ZH]"
+"G0[XH][YH]"
+"M2"

Resources/Post-Processors/VCarve/G2Core_Laser_Arcs_inch.pp

@@ -0,0 +1,177 @@
++================================================
++                                                
++ Vectric machine output configuration file for
++ g2core.
++                                                
++================================================
++                                                
++ History                                        
++                                                  
++ Who      When       What                         
++ ======== ========== ===========================
++ MattL    11/17/2019 Written from grbl_mm.pp
++                     added descriptive header
++ MattL    11/24/2019 Modified to use dynamic
++                     laser mode (T32 + M4)
++ MattL    01/25/2020 Inch version
++ ======== ========== ===========================
+
+POST_NAME = "G2Core Laser Arcs (inch) (*.gcode)"
+
+FILE_EXTENSION = "gcode"
+
+UNITS = "INCHES"
+
++------------------------------------------------
++    Line terminating characters                 
++------------------------------------------------
+
+LINE_ENDING = "[13][10]"
+
++------------------------------------------------
++    Block numbering                             
++------------------------------------------------
+
+LINE_NUMBER_START     = 0
+LINE_NUMBER_INCREMENT = 10
+LINE_NUMBER_MAXIMUM = 999999
+
++================================================
++                                                
++    Formatting for variables                     
++                                                
++================================================
+
+VAR LINE_NUMBER = [N|A|N|1.0]
+VAR POWER = [P|C|S|1.0|10.0]
+VAR SPINDLE_SPEED = [S|A|S|1.0]
+VAR FEED_RATE = [F|C|F|1.1]
+VAR X_POSITION = [X|C|X|1.4]
+VAR Y_POSITION = [Y|C|Y|1.4]
+VAR Z_POSITION = [Z|C|Z|1.4]
+VAR ARC_CENTRE_I_INC_POSITION = [I|A|I|1.4]
+VAR ARC_CENTRE_J_INC_POSITION = [J|A|J|1.4]
+VAR X_HOME_POSITION = [XH|A|X|1.4]
+VAR Y_HOME_POSITION = [YH|A|Y|1.4]
+VAR Z_HOME_POSITION = [ZH|A|Z|1.4]
+
++================================================
++                                                
++    Block definitions for toolpath output       
++                                                
++================================================
+
++---------------------------------------------------
++  Commands output at the start of the file
++---------------------------------------------------
+
+begin HEADER
+
+"( [TP_FILENAME] )"
+"( File created: [DATE] - [TIME])"
+"( for g2core from Vectric )"
+"( Material Size)"
+"( X= [XLENGTH], Y= [YLENGTH], Z= [ZLENGTH])"
+"([FILE_NOTES])"
+"(Tools used in this file: )"
+"([TOOLS_USED])"
+"T32"
+"M6"
+"G17"
+"G20"
+"G90"
+"S0M4"
+"G0[ZH]"
+"G0[XH][YH]"
+
++---------------------------------------------------
++  Commands output for rapid moves 
++---------------------------------------------------
+
+begin RAPID_MOVE
+
+"G0[X][Y][Z]"
+
+
++---------------------------------------------------
++  Commands output for the first feed rate move
++---------------------------------------------------
+
+begin FIRST_FEED_MOVE
+
+"G1[X][Y][Z][P][F]"
+
+
++---------------------------------------------------
++  Commands output for feed rate moves
++---------------------------------------------------
+
+begin FEED_MOVE
+
+"G1[X][Y][Z][P]"
+
+
++---------------------------------------------------
++  Commands output for the first clockwise arc move
++---------------------------------------------------
+
+begin FIRST_CW_ARC_MOVE
+
+"G2[X][Y][I][J][F][P]"
+
+
++---------------------------------------------------
++  Commands output for clockwise arc  move
++---------------------------------------------------
+
+begin CW_ARC_MOVE
+
+"G2[X][Y][I][J]"
+
+
++---------------------------------------------------
++  Commands output for the first counterclockwise arc move
++---------------------------------------------------
+
+begin FIRST_CCW_ARC_MOVE
+
+"G3[X][Y][I][J][F][P]"
+
+
++---------------------------------------------------
++  Commands output for counterclockwise arc  move
++---------------------------------------------------
+
+begin CCW_ARC_MOVE
+
+"G3[X][Y][I][J]"
+
++---------------------------------------------------
++  Commands output for Plunge Moves
++---------------------------------------------------
+
+begin PLUNGE_MOVE
+
+"G1[Z][F]"
+"[S]"
+
++---------------------------------------------------
++  Commands output for Retract Moves
++---------------------------------------------------
+
+begin RETRACT_MOVE
+
+"S0"
+"G0[Z]"
+
++---------------------------------------------------
++  Commands output at the end of the file
++---------------------------------------------------
+
+begin FOOTER
+
+"S0"
+"M5"
+"G0[ZH]"
+"G0[XH][YH]"
+"M2"