This is a driver for SSD1289 displays for use with STM32F103 devices.
It also brings a ADS7843 touchscreen driver.
It is very simple to use, see src/main.c.
See src/include/ssd1289.h for all available functions.
See src/ssd1289_demo.c for examples on all those functions.
If you want to use printf-family for outputting on display use sprintf()/snprintf()
and ssd1289_puts(). Regular printf() will output to USART1.
I took 4 different fonts from Linux Kernel. They are really nice and
good to read on this display.
In another project I dissected hundreds of video BIOSes for their fonts.
I have included IBM's XGA fonts in sizes 8x8, 8x14 and 8x16.
See src/ssd1289/ads7843_calibration.c for an example calibration routine.
This takes up some space. If you do not intend to change you display,
you may just run this calibration routine once and use it's output for
compiled in calibration data.
These measurements were done on an overclocked (128MHz) STM32F103:
- ssd1289_print_image(): printing an image from flash = 98.3mS
- ssd1289_fill_screen(): fill screen with single color = 11.2mS
The library uses 3.5k-30k of flash, depending on usage of it's functions.
The MCU communicates via FSMC with your display, mode is 16bit 8080-bus.
Display color format is RGB565. This means a 16bit color value is
encoded like this:
<Bit00-Bit04> RED
<Bit05-Bit10> GREEN
<Bit11-Bit15> BLUE
The display will be mapped into memory at a base of 0x60000000.
The RS (register select) line used by my hardware-setup is FSMC_A19,
this means we get an offset of 0x00020000.
All the bus-stuff is done by the chip's FSMC, so reading/writing
to 0x60000000 means access to the registers, r/w to 0x60020000
means access to the RAM. We don't have to deal with A19/RS by ourself.
LCD Pin STM32F10x AF STM32F103VCT6 Pin
-------------------------------------------------------
LCD_BLight TIM3_CH3 PB0
LCD_RD FSMC_NOE PD4
LCD_WR FSMC_NWE PD5
LCD_CS FSMC_NE1 PD7
LCD_RS FSMC_A19 PE3
LCD_DB0 FSMC_D0 PD14
LCD_DB1 FSMC_D1 PD15
LCD_DB2 FSMC_D2 PD0
LCD_DB3 FSMC_D3 PD1
LCD_DB4 FSMC_D4 PE7
LCD_DB5 FSMC_D5 PE8
LCD_DB6 FSMC_D6 PE9
LCD_DB7 FSMC_D7 PE10
LCD_DB10 FSMC_D8 PE11
LCD_DB11 FSMC_D9 PE12
LCD_DB12 FSMC_D10 PE13
LCD_DB13 FSMC_D11 PE14
LCD_DB14 FSMC_D12 PE15
LCD_DB15 FSMC_D13 PD8
LCD_DB16 FSMC_D14 PD9
LCD_DB17 FSMC_D15 PD10
(c) 2015, 2017-2019 Nils Stec [email protected]
(c) 2010 poweravr from powermcu.com has written:
bresenham line drawing function, parts of initialization routine
- 2015 august created first version of this driver
- 2015 august added pwm backlight control
- 2015 august added graphic functions
- 2015 august added text functions + linux 8x16-font
- 2017 jan first comments appeared...
- 2017 feb worked on text functions
- 2017 march replaced scrappy text functions
- 2017 march 1st planned release
- 2018 march finally getting a release done...
- 2018 may
- 2018 june dotmatrix+7seg functions
- 2018 nov ADS7843 working now, calibration GUI
- 2019 mar cleanup