Python module to control ch9329
You can install the package via pip:
pip install ch9329from serial import Serial
from ch9329 import keyboard
from ch9329 import mouse
from ch9329.config import get_manufacturer
from ch9329.config import get_parameters
from ch9329.config import get_product
from ch9329.config import get_serial_number
ser = Serial("COM3", 9600, timeout=0.05)
keyboard.press_and_release(ser, "a", modifiers=["ctrl"])
keyboard.write(ser, "Hello World\n")
keyboard.write(ser, "abcdefghijklmnopqrstuvwxyz\n")
keyboard.write(ser, "ABCDEFGHIJKLMNOPQRSTUVWXYZ\n")
keyboard.write(ser, "0123456789\n")
keyboard.write(ser, "!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~\n")
mouse.move(ser, x=500, y=500)
mouse.move(ser, x=50, y=50, relative=True)
mouse.click(ser, button="left")
print(get_serial_number(ser))
# 20193152CFBF
print(get_product(ser))
# WCH UART TO KB-MS_V1.7
print(get_manufacturer(ser))
# WWW.WCH.CN
params = get_parameters(ser)
print(f"cmd: {params.cmd}")
print(f"chip_working_mode: {params.chip_working_mode}")
print(f"serial_comm_mode: {params.serial_comm_mode}")
print(f"serial_comm_address: {params.serial_comm_address}")
print(f"serial_comm_baud_rate: {params.serial_comm_baud_rate}")
print(f"serial_comm_packet_interval: {params.serial_comm_packet_interval}")
print(f"usb_vid: {params.usb_vid}")
print(f"usb_pid: {params.usb_pid}")
print(f"usb_keyboard_upload_interval: {params.usb_keyboard_upload_interval}")
print(f"usb_keyboard_release_delay: {params.usb_keyboard_release_delay}")
print(f"usb_keyboard_automatic_return: {params.usb_keyboard_automatic_return}")
print(f"usb_string_enable: {params.usb_string_enable}")
print(f"usb_fast_upload: {params.usb_fast_upload}")
# cmd: 136
# chip_working_mode: 128
# serial_comm_mode: 128
# serial_comm_address: 0
# serial_comm_baud_rate: 9600
# serial_comm_packet_interval: 3
# usb_vid: 6790
# usb_pid: 57641
# usb_keyboard_upload_interval: 0
# usb_keyboard_release_delay: 1
# usb_keyboard_automatic_return: 0
# usb_string_enable: 0
# usb_fast_upload: 0
ser.close()This project is licensed under the terms of the MIT license.
Pull requests are welcome. For major changes, please open an issue first to discuss what you would like to change.
If you want to contact me you can reach me at [email protected].