Custom Auto-generated Configs

[no ci]
rusefi · Nov 1, 2024 · 976912b · 976912b
1 parent f596b82
commit 976912b
Show file tree

Hide file tree

Showing 3 changed files with 44 additions and 14 deletions.
diff --git a/generated/controllers/generated/rusefi_generated_mega100.h b/generated/controllers/generated/rusefi_generated_mega100.h
@@ -1291,9 +1291,9 @@
 #define SentEtbType_FORD_TYPE_1 2
 #define SentEtbType_GM_TYPE_1 1
 #define SentEtbType_NONE 0
-#define show_tcu_gauges false
+#define show_tcu_gauges true
 #define show_vvt_output_pin true
-#define SIGNATURE_HASH 2946439368
+#define SIGNATURE_HASH 2567730252
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@@ -1672,24 +1672,24 @@
 #define ts_show_fuel_trim_cylinder_9 true
 #define ts_show_fuel_trims true
 #define ts_show_full_pinout true
-#define ts_show_gdi false
+#define ts_show_gdi true
 #define ts_show_gdi_low_level true
 #define ts_show_globalTriggerAngleOffset true
 #define ts_show_hardware_simulator true
 #define ts_show_hbridge_function true
 #define ts_show_hd true
-#define ts_show_hip9011 false
+#define ts_show_hip9011 true
 #define ts_show_idle_hardware true
 #define ts_show_ign_key_analog_input false
 #define ts_show_ign_key_switch false
 #define ts_show_ignitionPinMode true
 #define ts_show_inj_diag false
 #define ts_show_injection_mode true
 #define ts_show_injection_phase true
-#define ts_show_injectionPinMode false
+#define ts_show_injectionPinMode true
 #define ts_show_intake_cam_edge true
 #define ts_show_intake_vvt_direction true
-#define ts_show_k_line false
+#define ts_show_k_line true
 #define ts_show_l9779 false
 #define ts_show_maf true
 #define ts_show_main_relay true
@@ -1701,15 +1701,15 @@
 #define ts_show_oil_pressure_sensor true
 #define ts_show_oil_temp_sensor true
 #define ts_show_onboard_accelerometer false
-#define ts_show_output_diag false
+#define ts_show_output_diag true
 #define ts_show_popular_vehicles true
 #define ts_show_reboot_to_dfu true
 #define ts_show_reset_calibrations false
 #define ts_show_rotary true
 #define ts_show_sd_card true
 #define ts_show_sd_pins true
 #define ts_show_second_bank true
-#define ts_show_software_knock false
+#define ts_show_software_knock true
 #define ts_show_speedo_settings true
 #define ts_show_spi true
 #define ts_show_spi1_enable true
@@ -1731,7 +1731,7 @@
 #define ts_show_strokes true
 #define ts_show_sync_cam true
 #define ts_show_tachometer true
-#define ts_show_tcu false
+#define ts_show_tcu true
 #define ts_show_throttle_switch true
 #define ts_show_tle8888 false
 #define ts_show_top_level_can_menu true
@@ -1754,7 +1754,7 @@
 #define ts_show_wastegate_sensor true
 #define ts_show_wbo_canbus_index true
 #define ts_show_wbo_canbus_set_index true
-#define TS_SIGNATURE "rusEFI main.2024.11.01.mega100.2946439368"
+#define TS_SIGNATURE "rusEFI main.2024.11.01.mega100.2567730252"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'

diff --git a/generated/controllers/generated/signature_mega100.h b/generated/controllers/generated/signature_mega100.h
@@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer
 //
 
-#define SIGNATURE_HASH 2946439368
-#define TS_SIGNATURE "rusEFI main.2024.11.01.mega100.2946439368"
+#define SIGNATURE_HASH 2567730252
+#define TS_SIGNATURE "rusEFI main.2024.11.01.mega100.2567730252"
diff --git a/generated/tunerstudio/generated/rusefi_mega100.ini b/generated/tunerstudio/generated/rusefi_mega100.ini
@@ -38,12 +38,12 @@ enable2ndByteCanID = false
 
 [MegaTune]
  ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI main.2024.11.01.mega100.2946439368"
+	signature	= "rusEFI main.2024.11.01.mega100.2567730252"
 
 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI main.2024.11.01.mega100.2946439368" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI main.2024.11.01.mega100.2567730252" ; signature is expected to be 7 or more characters.
 
 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@@ -5047,8 +5047,12 @@ gaugeCategory = Sensors - Raw
 	issEdgeCounterGauge  = issEdgeCounter, "Raw ISS",			"counter", 0, 5, 0, 0, 5, 5, 0, 0
 
 gaugeCategory = Transmission
+	desiredGearGauge = tcuDesiredGear, "TCU: Desired Gear", "gear", -1, 10, -1, -1, 10, 10, 0, 0
+	currentGearGauge = tcuCurrentGear, "TCU: Current Gear", "gear", -1, 10, -1, -1, 10, 10, 0, 0
 	detectedGearGauge = detectedGear, "Detected Gear", "gear", 0, 10, 0, 0, 10, 10, 0, 0
 	speedToRpmRatioGauge = speedToRpmRatio, "Gearbox Ratio", "",	0,	100,	0,	0,	100,  100,	4,	4
+	ISSGauge = ISSValue, "TCU: Input Shaft Speed", "RPM", 0, {rpmHardLimit + 2000}, 200, {cranking_rpm}, {rpmHardLimit - 500}, {rpmHardLimit}, 0, 0
+	tcRatioGauge = tcRatio, "TCU: Torque Converter Ratio", "",	0,	100,	0,	0,	100,  100,	4,	4
 	shiftTimeGauge = lastShiftTime, "Last Shift Time", "S", 0, 2, 0, 0, 2, 2, 4, 4
 	idealEngineTorqueGauge = idealEngineTorque, "idealEngineTorque", "",	0,	100,	0,	0,	100,  100,	4,	4
 	pressureControlGauge = pressureControlDuty, "EPC Duty Cycle", "%", 0, 100, 0, 0, 100, 100, 0, 0
@@ -5209,6 +5213,7 @@ gaugeCategory = GPPWM Outputs
 	; indicator = { isInjectionEnabled && fuelCutReason == 0 }, { Inj: bitStringValue(injModeList, currentInjectionMode) }, { Inj: bitStringValue(injModeList, currentInjectionMode) }, white, black, white, black
 	; indicator = { isIgnitionEnabled && sparkCutReason == 0 }, { Ign: bitStringValue(ignModeList, currentIgnitionMode) }, { Ign: bitStringValue(ignModeList, currentIgnitionMode) }, white, black, white, black
 
+	indicatorTemplate = {isShifting}, "In Gear", "Shifting", white, black, green, black
 	; this file is used to define custom board-specific indicators see gen_config_common.sh
 ; see also extra.txt
 
@@ -6178,6 +6183,8 @@ menuDialog = main
 		subMenu = std_separator
 
 		subMenu = multisparkSettings,		"Multispark", 0, {isIgnitionEnabled == 1}
+		subMenu = softwareKnock,			"Knock Control" 
+		subMenu = maxKnockRetardTbl,		"Max knock retard" 
 
 	menu = "&Cranking"
 		subMenu = crankingDialog,			"Cranking settings"
@@ -6275,6 +6282,17 @@ menuDialog = main
 		groupChildMenu = scriptCurve5Settings,				"Script Curve #5"
 		groupChildMenu = scriptCurve6Settings,				"Script Curve #6"
 
+		subMenu = std_separator
+		subMenu = tcuControls,			"Transmission Settings (alpha)"
+		subMenu = gearControls,			"Gear Selection Settings (alpha)"
+		subMenu = inputSpeedSensor,		"Input Speed Sensor (alpha)"
+		subMenu = shiftSpeedDialog,		"Automatic Shift Points (alpha)"
+		subMenu = tcuSolenoidTableTbl,		"Shift Solenoids (alpha)"
+		subMenu = tccCurves,			"TCC Lock/Unlock Speed (alpha)"
+		subMenu = pcPerGearDialog,		"Line Pressure Per Gear (alpha)"
+		subMenu = pcPerShiftDialog,		"Line Pressure Per Shift (alpha)"
+		subMenu = 32Dialog,			"3-2 Shift Solenoid Percent by Speed (alpha)"
+		subMenu = rangeMatrixDialog,		"Range Selector Input Matrix (alpha)"
 
 	menu = "&Sensors", { 1 }, { uiMode == 0 || uiMode == 1 }
 		groupMenu = "Chassis sensors"
@@ -6358,13 +6376,20 @@ menuDialog = main
 		subMenu = connection,					"Connection"
 		subMenu = std_separator
 
+		subMenu = OutputDiagDialog,			"Outputs diagnostic", { 1 }, { uiMode == 0 || uiMode == 1 }
 		subMenu = std_separator
 
 		subMenu = allPins1,					"Full pinout 1/3" 
 		subMenu = allPins2,					"Full pinout 2/3" 
 		subMenu = allPins3_1_and_2		"Full pinout 3/3" 
 
 		# EXPERIMENTAL FEATURES
+		subMenu = std_separator
+		subMenu = mc33Dialog,									"PT2001 control"
+		subMenu = hpfpCamDialog,			"HPFP Cam Configuration"
+		subMenu = hpfpPumpDialog,			"HPFP Pump Configuration", {hpfpCamLobes != 0}
+		subMenu = hpfpTargetTable,							"HPFP Target Pressure", {hpfpCamLobes != 0}
+		subMenu = hpfpCompensationTable,					"HPFP Pump Compensation", {hpfpCamLobes != 0}
 
 
 		subMenu = std_separator
@@ -6374,7 +6399,9 @@ menuDialog = main
 		subMenu = tractionIgnitionSkipDialog,    "Traction Control Skip Ignition"
 		subMenu = std_separator
 
+		subMenu = hipFunction,				"HIP9011 settings (knock sensor)" 
 
+		subMenu = kLineDialog,              "K-Line"
 		subMenu = parkingLot,				"Experimental 1"
 		subMenu = parkingLot2,				"Experimental 2"
 		subMenu = parkingLot3,				"Experimental 3"
@@ -7423,6 +7450,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 		field = "Injection Output 10 ",					injectionPins10, {isInjectionEnabled == 1 && cylindersCount > 9}
 		field = "Injection Output 11 ",					injectionPins11, {isInjectionEnabled == 1 && cylindersCount > 10}
 		field = "Injection Output 12 ",					injectionPins12, {isInjectionEnabled == 1 && cylindersCount > 11}
+		field = ""
+		field = "injection Output(s) Mode",				injectionPinMode, {isInjectionEnabled == 1}
 
 	dialog = cylinderBankSelect, "Cylinder Banks", yAxis
 		field = "Cylinder 1",						cylinderBankSelect1, {isInjectionEnabled == 1}
@@ -7499,6 +7528,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 		field = "Count", benchTestCount
 		field = "On Time", benchTestOnTime
 		field = "Off Time", benchTestOffTime
+		panel = testTcuSolenoids
 
 	dialog = injectionSettingsEast, "", yAxis
 		panel = testInjectors