Home
- Remove the brown covering
. 
- Assemble both the motors with the respective motor clamps and fix them on the base plates as shown below
. 
. 
. 
- Assemble the spacers in the provided and annotated slots
. . 
.
- Following is the battery and its respective slots
- The charging slot must be used for charging the battery with the provided adapter
- The Male jack must be connected to the main board for power supply with its respective provided female jack
. 
. 
. 
Motor connections should be made in the following way
- Left Motor Top wire to A +
- Left Motor Bottom wire to A -
- Right Motor Top to B +
- Right Motor Bottom to B -
. 
. 
- Here is the final assembled robot
- Use the switch to turn on the robot and that’s it!
. 
. 
. 