This is an active fork and drop-in replacement of the node-unzip and addresses the following issues:
- finish/close events are not always triggered, particular when the input stream is slower than the receivers
- Any files are buffered into memory before passing on to entry
The structure of this fork is similar to the original, but uses Promises and inherit guarantees provided by node streams to ensure low memory footprint and emits finish/close events at the end of processing. The new Parser will push any parsed entries downstream if you pipe from it, while still supporting the legacy entry event as well.
Breaking changes: The new Parser will not automatically drain entries if there are no listeners or pipes in place.
Unzipper provides simple APIs similar to node-tar for parsing and extracting zip files. There are no added compiled dependencies - inflation is handled by node.js's built in zlib support.
Please note: Methods that use the Central Directory instead of parsing entire file can be found under Open
Chrome extension files (.crx) are zipfiles with an extra header at the start of the file. Unzipper will parse .crx file with the streaming methods (Parse and ParseOne). The Open methods will check for crx headers and parse crx files, but only if you provide crx: true in options.
$ npm install unzipperfs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Extract({ path: 'output/path' }));Extract emits the 'close' event once the zip's contents have been fully extracted to disk. Extract uses fstream.Writer and therefore needs need an absolute path to the destination directory. This directory will be automatically created if it doesn't already exits.
Process each zip file entry or pipe entries to another stream.
Important: If you do not intend to consume an entry stream's raw data, call autodrain() to dispose of the entry's
contents. Otherwise the stream will halt. .autodrain() returns an empty stream that provides error and finish events.
Additionally you can call .autodrain().promise() to get the promisified version of success or failure of the autodrain.
// If you want to handle autodrain errors you can either:
entry.autodrain().catch(e => handleError);
// or
entry.autodrain().on('error' => handleError);Here is a quick example:
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Parse())
.on('entry', function (entry) {
const fileName = entry.path;
const type = entry.type; // 'Directory' or 'File'
const size = entry.vars.uncompressedSize; // There is also compressedSize;
if (fileName === "this IS the file I'm looking for") {
entry.pipe(fs.createWriteStream('output/path'));
} else {
entry.autodrain();
}
});and the same example using async iterators:
const zip = fs.createReadStream('path/to/archive.zip').pipe(unzipper.Parse({forceStream: true}));
for await (const entry of zip) {
const fileName = entry.path;
const type = entry.type; // 'Directory' or 'File'
const size = entry.vars.uncompressedSize; // There is also compressedSize;
if (fileName === "this IS the file I'm looking for") {
entry.pipe(fs.createWriteStream('output/path'));
} else {
entry.autodrain();
}
}If you pipe from unzipper the downstream components will receive each entry for further processing. This allows for clean pipelines transforming zipfiles into unzipped data.
Example using stream.Transform:
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Parse())
.pipe(stream.Transform({
objectMode: true,
transform: function(entry,e,cb) {
const fileName = entry.path;
const type = entry.type; // 'Directory' or 'File'
const size = entry.vars.uncompressedSize; // There is also compressedSize;
if (fileName === "this IS the file I'm looking for") {
entry.pipe(fs.createWriteStream('output/path'))
.on('finish',cb);
} else {
entry.autodrain();
cb();
}
}
}
}));Example using etl:
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Parse())
.pipe(etl.map(entry => {
if (entry.path == "this IS the file I'm looking for")
return entry
.pipe(etl.toFile('output/path'))
.promise();
else
entry.autodrain();
}))unzipper.parseOne([regex]) is a convenience method that unzips only one file from the archive and pipes the contents down (not the entry itself). If no search criteria is specified, the first file in the archive will be unzipped. Otherwise, each filename will be compared to the criteria and the first one to match will be unzipped and piped down. If no file matches then the the stream will end without any content.
Example:
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.ParseOne())
.pipe(fs.createReadStream('firstFile.txt'));While the recommended strategy of consuming the unzipped contents is using streams, it is sometimes convenient to be able to get the full buffered contents of each file . Each entry provides a .buffer function that consumes the entry by buffering the contents into memory and returning a promise to the complete buffer.
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Parse())
.pipe(etl.map(async entry => {
if (entry.path == "this IS the file I'm looking for") {
const content = await entry.buffer();
await fs.writeFile('output/path',content);
}
else {
entry.autodrain();
}
}))The parser emits finish and error events like any other stream. The parser additionally provides a promise wrapper around those two events to allow easy folding into existing Promise-based structures.
Example:
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Parse())
.on('entry', entry => entry.autodrain())
.promise()
.then( () => console.log('done'), e => console.log('error',e));Archives created by legacy tools usually have filenames encoded with IBM PC (Windows OEM) character set. You can decode filenames with preferred character set:
const il = require('iconv-lite');
fs.createReadStream('path/to/archive.zip')
.pipe(unzipper.Parse())
.on('entry', function (entry) {
// if some legacy zip tool follow ZIP spec then this flag will be set
const isUnicode = entry.props.flags.isUnicode;
// decode "non-unicode" filename from OEM Cyrillic character set
const fileName = isUnicode ? entry.path : il.decode(entry.props.pathBuffer, 'cp866');
const type = entry.type; // 'Directory' or 'File'
const size = entry.vars.uncompressedSize; // There is also compressedSize;
if (fileName === "Текстовый файл.txt") {
entry.pipe(fs.createWriteStream(fileName));
} else {
entry.autodrain();
}
});Previous methods rely on the entire zipfile being received through a pipe. The Open methods load take a different approach: load the central directory first (at the end of the zipfile) and provide the ability to pick and choose which zipfiles to extract, even extracting them in parallel. The open methods return a promise on the contents of the directory, with individual files listed in an array. Each file element has the following methods:
stream([password])- returns a stream of the unzipped content which can be piped to any destinationbuffer([password])- returns a promise on the buffered content of the file) If the file is encrypted you will have to supply a password to decrypt, otherwise you can leave blank. Unlikeadm-zipthe Open methods will never read the entire zipfile into buffer.
The last argument is optional options object where you can specify tailSize (default 80 bytes), i.e. how many bytes should we read at the end of the zipfile to locate the endOfCentralDirectory. This location can be variable depending on zip64 extensible data sector size. Additionally you can supply option crx: true which will check for a crx header and parse the file accordingly by shifting all file offsets by the length of the crx header.
Returns a Promise to the central directory information with methods to extract individual files. start and end options are used to avoid reading the whole file.
Example:
async function main() {
const directory = await unzipper.Open.file('path/to/archive.zip');
console.log('directory', d);
return new Promise( (resolve, reject) => {
directory.files[0]
.stream()
.pipe(fs.createWriteStream('firstFile'))
.on('error',reject)
.on('finish',resolve)
});
}
main();This function will return a Promise to the central directory information from a URL point to a zipfile. Range-headers are used to avoid reading the whole file. Unzipper does not ship with a request library so you will have to provide it as the first option.
Live Example: (extracts a tiny xml file from the middle of a 500MB zipfile)
const request = require('request');
const unzipper = require('./unzip');
async function main() {
const directory = await unzipper.Open.url(request,'http://www2.census.gov/geo/tiger/TIGER2015/ZCTA5/tl_2015_us_zcta510.zip');
const file = directory.files.find(d => d.path === 'tl_2015_us_zcta510.shp.iso.xml');
const content = await file.buffer();
console.log(content.toString());
}
main();This function takes a second parameter which can either be a string containing the url to request, or an options object to invoke the supplied request library with. This can be used when other request options are required, such as custom headers or authentication to a third party service.
const request = require('google-oauth-jwt').requestWithJWT();
const googleStorageOptions = {
url: `https://www.googleapis.com/storage/v1/b/m-bucket-name/o/my-object-name`,
qs: { alt: 'media' },
jwt: {
email: google.storage.credentials.client_email,
key: google.storage.credentials.private_key,
scopes: ['https://www.googleapis.com/auth/devstorage.read_only']
}
});
async function getFile(req, res, next) {
const directory = await unzipper.Open.url(request, googleStorageOptions);
const file = zip.files.find((file) => file.path === 'my-filename');
return file.stream().pipe(res);
});This function will return a Promise to the central directory information from a zipfile on S3. Range-headers are used to avoid reading the whole file. Unzipper does not ship with with the aws-sdk so you have to provide an instantiated client as first arguments. The params object requires Bucket and Key to fetch the correct file.
Example:
const unzipper = require('./unzip');
const AWS = require('aws-sdk');
const s3Client = AWS.S3(config);
async function main() {
const directory = await unzipper.Open.s3(s3Client,{Bucket: 'unzipper', Key: 'archive.zip'});
return new Promise( (resolve, reject) => {
directory.files[0]
.stream()
.pipe(fs.createWriteStream('firstFile'))
.on('error',reject)
.on('finish',resolve)
});
}
main();If you already have the zip file in-memory as a buffer, you can open the contents directly.
Example:
// never use readFileSync - only used here to simplify the example
const buffer = fs.readFileSync('path/to/arhive.zip');
async function main() {
const directory = await unzipper.Open.buffer(buffer);
console.log('directory',directory);
// ...
}
main();The directory object returned from Open.[method] provides an extract method which extracts all the files to a specified path, with an optional concurrency (default: 1).
Example (with concurrency of 5):
unzip.Open.file('path/to/archive.zip')
.then(d => d.extract({path: '/extraction/path', concurrency: 5}));See LICENCE