fpga: Last review updates

pulp-platform · Oct 3, 2023 · 5bbbe25 · 5bbbe25
1 parent cfafe6e
commit 5bbbe25
Show file tree

Hide file tree

Showing 12 changed files with 99 additions and 82 deletions.
diff --git a/Bender.yml b/Bender.yml
@@ -50,9 +50,9 @@ sources:
       - target/sim/src/fixture_cheshire_soc.sv
       - target/sim/src/tb_cheshire_soc.sv
 
-  - target: any(fpga, xilinx)
+  - target: all(fpga, xilinx)
     files:
       - target/xilinx/src/fan_ctrl.sv
-      - target/xilinx/src/dram_wrapper.sv
+      - target/xilinx/src/dram_wrapper_xilinx.sv
       - target/xilinx/src/phy_definitions.svh
       - target/xilinx/src/cheshire_top_xilinx.sv
diff --git a/README.md b/README.md
@@ -21,47 +21,6 @@ run -all
 
 If you have access to our internal servers, you can run `make nonfree-init` to fetch additional resources we cannot make publically accessible. Note that these are *not required* to use anything provided in this repository.
 
-## Linux image
-
-To build the Linux image for FPGA:
-```bash
-# Clone and build GCC, OpenSBI, U-Boot and Linux
-git clone [email protected]:pulp-platform/cva6-sdk.git --branch fix/cheshire
-cd cva6-sdk
-git submodule update --init --recursive
-make images
-# Link the output in the sw dir
-ln -s cva6-sdk/install64 sw/boot/install64
-# Build the image at sw/boot/linux-[genesys2,vcu128].gpt.bin
-make BOARD=[genesys2,vcu128] chs-linux-img
-
-```
-
-On Genesys2, you can now flash this image to your sd card (require sudo).
-
-```bash
-# Replace sdX by your SD card device
-dd if=sw/boot/cheshire-linux-genesys2.gpt.bin of=/dev/sdX
-```
-
-On VCU128, you can now flash this image to the SPI using Vivado:
-
-```bash
-# Define XILINX_PORT, XILINX_HOST, FPGA_PATH to let Vivado find your FPGA
-# See defaults in xilinx.mk
-make chs-xil-flash BOARD=vcu128 MODE=batch
-```
-
-## FPGA
-
-To build the bitstream for FPGA, initialize the repository with `make all` then run `make chs-xil-all` followed by desired arguments:
-
-* `BOARD=[genesys2,vcu128]`: select supported evaluation board (note `zcu102` is also supported but do not boot Linux as access to an SPI flash or an SD card is not implemented).
-* `INT-JTAG=[1,0]`: (only on vcu128) connect the debugger to the intenal JTAG chain (see BSCANE2 primitive) or to an external JTAG dongle (if 0).
-* `MODE=[batch,gui]`: open Vivado GUI or execute in shell.
-
-You can flash the bitstream from the GUI with `make chs-xil-gui` or directly in shell using `make chs-xil-program MODE=batch BOARD=[genesys2,vcu128]`. Here again you will need to define `XILINX_PORT`, `XILINX_HOST`, `FPGA_PATH` for your setup. At IIS, find default values in `carfield.mk`.
-
 ## License
 
 Unless specified otherwise in the respective file headers, all code checked into this repository is made available under a permissive license. All hardware sources and tool scripts are licensed under the Solderpad Hardware License 0.51 (see `LICENSE`) with the exception of generated register file code (e.g. `hw/regs/*.sv`), which is generated by a fork of lowRISC's [`regtool`](https://github.com/lowRISC/opentitan/blob/master/util/regtool.py) and licensed under Apache 2.0. All software sources are licensed under Apache 2.0.

diff --git a/cheshire.mk b/cheshire.mk
@@ -56,7 +56,7 @@ chs-clean-deps:
 ######################
 
 CHS_NONFREE_REMOTE ?= [email protected]:pulp-restricted/cheshire-nonfree.git
-CHS_NONFREE_COMMIT ?= f70c019
+CHS_NONFREE_COMMIT ?= 1ee2e87
 
 chs-nonfree-init:
 	git clone $(CHS_NONFREE_REMOTE) $(CHS_ROOT)/nonfree
@@ -162,7 +162,7 @@ CHS_SIM_ALL += $(CHS_ROOT)/target/sim/vsim/compile.cheshire_soc.tcl
 #############
 
 include $(CHS_ROOT)/target/xilinx/xilinx.mk
-include $(CHS_XIL_DIR)/sim/simulate.mk
+include $(CHS_XIL_DIR)/sim/sim.mk
 CHS_XILINX_ALL += $(CHS_XIL_DIR)/scripts/add_sources.tcl
 CHS_LINUX_IMG  += $(CHS_SW_DIR)/boot/linux-${BOARD}.gpt.bin
 

diff --git a/docs/tg/xilinx.md b/docs/tg/xilinx.md
@@ -7,6 +7,7 @@ This page describes how to map Cheshire on Xilinx FPGAs to *execute baremetal pr
 We currently provide working setups for:
 
 - Digilent Genesys 2 with Vivado `>= 2020.2`
+- Xilinx VCU128 with Vivado `>= 2020.2`
 
 We are working on support for more boards in the future.
 
@@ -19,9 +20,14 @@ Since the implementation steps and available features vary between boards, we pr
 Generate the bitstream `target/xilinx/out/cheshire_top_xilinx.bit` by running:
 
 ```
-make -C target/xilinx
+make chs-xil-all BOARD=genesys2 MODE=[batch,gui]
 ```
 
+See the argument list below:
+
+* `VIVADO`: The Vivado version to use (see default in `target/xilinx/xilinx.mk`)
+* `MODE`: If 'batch', compile in shell, if 'gui', Open Vivado GUI.
+
 Before flashing the bitstream to your device, take note of the position of onboard switches, which control important functionality:
 
 
@@ -33,6 +39,37 @@ Before flashing the bitstream to your device, take note of the position of onboa
 
 The reset, JTAG TAP, UART, I2C, and VGA are all connected to their onboard logic or ports. The UART has *no flow control*. The microSD slot is connected to chip select 0 of the SPI host peripheral. Serial link and GPIOs are currently not available.
 
+### Xilinx VCU128
+
+Generate the bitstream `target/xilinx/out/cheshire_top_xilinx.bit` by running:
+
+```
+make chs-xil-all BOARD=vcu128 MODE=[batch,gui] INT-JTAG=[0,1]
+```
+
+See the argument list below:
+
+* `INT-JTAG`: If 1, use an external JTAG chain (we use a Digilent JTAG-HS2 cable connected to the Xilinx XM105 FMC debug card). See the connections in `vcu128.xdc`.
+
+
+As there are no switches on this board, the bootmode is selected by VIO (see next section).
+
+## Using the Vivado GUI
+
+Even after implementing your system in batch mode, you can open the Vivado GUI with:
+
+```
+make chs-xil-gui
+```
+
+In particular, it will give you access the to Virtual Inputs Outputs (VIOs) after flashing/refreshing the FPGA:
+
+  | VIO               | Function                                                        |
+  | ----------------- | ----------------------------------------------------------------|
+  | vio_reset         | Positive edge-sensitive reset for the whole system              |
+  | vio_boot_mode     | Override the boot-mode switches described above                 |
+  | vio_boot_mode_sel | Select between 0: using boot mode switches 1: use boot mode VIO |
+
 ## Debugging with OpenOCD
 
 To establish a debug bridge over JTAG, ensure the target is in a debuggable state (for example by resetting into the idle boot mode 0) and launch OpenOCD with:
@@ -86,7 +123,7 @@ First, build an up-to-date a disk image for your desired binary. For `helloworld
 make sw/tests/helloworld.gpt.bin
 ```
 
-Then flash this image to an SD card (*note that this requires root privileges*):
+Then flash this image to an SD card (for Genesys2) (*note that this requires root privileges*):
 
 ```
 sudo dd if=sw/tests/helloworld.gpt.bin of=/dev/<sdcard>
@@ -115,9 +152,12 @@ In this case, OpenSBI is loaded by a regular baremetal program called the [Zero-
 To create a full Linux disk image from the ZSL, device tree, firmware, and Linux, run:
 
 ```
-make sw/boot/linux.gpt.bin
+# Note that the device tree depends from the board's peripherals
+make chs-linux-img BOARD=[genesys2, vcu128]
 ```
 
+### Digilent Genesys 2
+
 Flash this image to an SD card as you did in the previous section, then insert the SD card and reset into boot mode 1. You should first see the ZSL print on the UART:
 
 ```
@@ -131,3 +171,19 @@ Flash this image to an SD card as you did in the previous section, then insert t
 (           ))))))))))
 ```
 You should then boot through OpenSBI, U-Boot, and Linux until you are dropped into a shell.
+
+### Xilinx VCU128
+
+This board does not offer a SD card reader. We use the integrated flash:
+
+```
+make chs-xil-flash MODE=batch BOARD=vcu128
+```
+
+Use the following parameters (defaults are in `target/xilinx/xilinx.mk`) to select your board:
+
+* XILINX_PART  : The FPGA part (leave to default)
+* XILINX_BOARD : The FPGA board (leave to default)
+* XILINX_HOST  : The server where your board is connected (or localhost)
+* XILINX_PORT  : The port opened by Vivado for your board (Vivado usually sets it to 3121)
+* VIVADO_PATH  : The path to your board as seen in the Vivado Hardware Manager (usually xilinx_tcf/Xilinx/`SerialID`)
diff --git a/sw/lib/hal/uart_debug.c b/sw/lib/hal/uart_debug.c
@@ -24,7 +24,7 @@ int uart_debug_init(void *uart_base, uint64_t core_freq) {
     CHECK_ASSERT(0x11, uart_base != 0);
     CHECK_ASSERT(0x12, core_freq != 0);
     // The UART debug mode uses the sane default 115.2kBaud
-    uart_init(uart_base, core_freq, 115200);
+    uart_init(uart_base, core_freq, __BAUDRATE);
     fence();
     // Nothing went wrong
     return 0;

diff --git a/sw/sw.mk b/sw/sw.mk
@@ -140,7 +140,7 @@ $(foreach link,$(patsubst $(CHS_SW_LD_DIR)/%.ld,%,$(wildcard $(CHS_SW_LD_DIR)/*.
 CHS_CVA6_SDK_IMGS ?= $(addprefix $(CHS_SW_DIR)/deps/cva6-sdk/install64/,fw_payload.bin uImage)
 
 # Create full Linux disk image
-$(CHS_SW_DIR)/boot/linux-${BOARD}.gpt.bin: $(CHS_SW_DIR)/boot/zsl.rom.bin $(CHS_SW_DIR)/boot/cheshire_$(BOARD).dtb $(CHS_SW_DIR)/boot/install64/fw_payload.bin $(CHS_SW_DIR)/boot/install64/uImage
+$(CHS_SW_DIR)/boot/linux-${BOARD}.gpt.bin: $(CHS_SW_DIR)/boot/zsl.rom.bin $(CHS_SW_DIR)/boot/cheshire_$(BOARD).dtb $(CHS_CVA6_SDK_IMGS)
 	truncate -s $(CHS_SW_DISK_SIZE) $@
 	sgdisk --clear -g --set-alignment=1 \
 		--new=1:64:96 --typecode=1:$(CHS_SW_ZSL_TGUID) \

diff --git a/sw/tests/helloworld.c b/sw/tests/helloworld.c
@@ -17,7 +17,7 @@ int main(void) {
     char str[] = "Hello World!\r\n";
     uint32_t rtc_freq = *reg32(&__base_regs, CHESHIRE_RTC_FREQ_REG_OFFSET);
     uint64_t reset_freq = clint_get_core_freq(rtc_freq, 2500);
-    uart_init(&__base_uart, reset_freq, 115200);
+    uart_init(&__base_uart, reset_freq, __BAUDRATE);
     uart_write_str(&__base_uart, str, sizeof(str));
     uart_write_flush(&__base_uart);
     return 0;

diff --git a/target/xilinx/constraints/genesys2.xdc b/target/xilinx/constraints/genesys2.xdc
@@ -63,8 +63,8 @@ set_max_delay -datapath \
 # VGA #
 #######
 
-# set_output_delay -min -clock $soc_clk [expr $SOC_TCK * 0.10] [get_ports vga*]
-# set_output_delay -max -clock $soc_clk [expr $SOC_TCK * 0.35] [get_ports vga*]
+set_output_delay -min -clock $soc_clk [expr $SOC_TCK * 0.10] [get_ports vga*]
+set_output_delay -max -clock $soc_clk [expr $SOC_TCK * 0.35] [get_ports vga*]
 
 ############
 # Switches #
@@ -95,11 +95,11 @@ set_output_delay -max -clock $soc_clk [expr 0.20 * $SOC_TCK] [get_ports {sd_d_*
 # I2C #
 #######
 
-# set_max_delay [expr $I2C_IO_SPEED * 0.35] -from [get_ports {i2c_scl_io i2c_sda_io}]
-# set_false_path -hold -from [get_ports {i2c_scl_io i2c_sda_io}]
+set_max_delay [expr $I2C_IO_SPEED * 0.35] -from [get_ports {i2c_scl_io i2c_sda_io}]
+set_false_path -hold -from [get_ports {i2c_scl_io i2c_sda_io}]
 
-# set_max_delay [expr $I2C_IO_SPEED * 0.35] -to [get_ports {i2c_scl_io i2c_sda_io}]
-# set_false_path -hold -to [get_ports {i2c_scl_io i2c_sda_io}]
+set_max_delay [expr $I2C_IO_SPEED * 0.35] -to [get_ports {i2c_scl_io i2c_sda_io}]
+set_false_path -hold -to [get_ports {i2c_scl_io i2c_sda_io}]
 
 #################################################################################
 
@@ -188,27 +188,27 @@ set_property -dict { PACKAGE_PIN R28   IOSTANDARD LVCMOS33 } [get_ports { sd_scl
 #set_property -dict { PACKAGE_PIN AK14  IOSTANDARD LVCMOS15 } [get_ports { ETH_TX_EN }]; #IO_L20P_T3_33 Sch=eth_tx_en
 
 ## VGA Connector
-# set_property -dict { PACKAGE_PIN AH20  IOSTANDARD LVCMOS33 } [get_ports { vga_b[0] }]; #IO_L22N_T3_12 Sch=vga_b[3]
-# set_property -dict { PACKAGE_PIN AG20  IOSTANDARD LVCMOS33 } [get_ports { vga_b[1] }]; #IO_L22P_T3_12 Sch=vga_b[4]
-# set_property -dict { PACKAGE_PIN AF21  IOSTANDARD LVCMOS33 } [get_ports { vga_b[2] }]; #IO_L19N_T3_VREF_12 Sch=vga_b[5]
-# set_property -dict { PACKAGE_PIN AK20  IOSTANDARD LVCMOS33 } [get_ports { vga_b[3] }]; #IO_L24P_T3_12 Sch=vga_b[6]
-# set_property -dict { PACKAGE_PIN AG22  IOSTANDARD LVCMOS33 } [get_ports { vga_b[4] }]; #IO_L20P_T3_12 Sch=vga_b[7]
-
-# set_property -dict { PACKAGE_PIN AJ23  IOSTANDARD LVCMOS33 } [get_ports { vga_g[0] }]; #IO_L21N_T3_DQS_12 Sch=vga_g[2]
-# set_property -dict { PACKAGE_PIN AJ22  IOSTANDARD LVCMOS33 } [get_ports { vga_g[1] }]; #IO_L21P_T3_DQS_12 Sch=vga_g[3]
-# set_property -dict { PACKAGE_PIN AH22  IOSTANDARD LVCMOS33 } [get_ports { vga_g[2] }]; #IO_L20N_T3_12 Sch=vga_g[4]
-# set_property -dict { PACKAGE_PIN AK21  IOSTANDARD LVCMOS33 } [get_ports { vga_g[3] }]; #IO_L24N_T3_12 Sch=vga_g[5]
-# set_property -dict { PACKAGE_PIN AJ21  IOSTANDARD LVCMOS33 } [get_ports { vga_g[4] }]; #IO_L23N_T3_12 Sch=vga_g[6]
-# set_property -dict { PACKAGE_PIN AK23  IOSTANDARD LVCMOS33 } [get_ports { vga_g[5] }]; #IO_L17P_T2_12 Sch=vga_g[7]
-
-# set_property -dict { PACKAGE_PIN AK25  IOSTANDARD LVCMOS33 } [get_ports { vga_r[0] }]; #IO_L15N_T2_DQS_12 Sch=vga_r[3]
-# set_property -dict { PACKAGE_PIN AG25  IOSTANDARD LVCMOS33 } [get_ports { vga_r[1] }]; #IO_L18P_T2_12 Sch=vga_r[4]
-# set_property -dict { PACKAGE_PIN AH25  IOSTANDARD LVCMOS33 } [get_ports { vga_r[2] }]; #IO_L18N_T2_12 Sch=vga_r[5]
-# set_property -dict { PACKAGE_PIN AK24  IOSTANDARD LVCMOS33 } [get_ports { vga_r[3] }]; #IO_L17N_T2_12 Sch=vga_r[6]
-# set_property -dict { PACKAGE_PIN AJ24  IOSTANDARD LVCMOS33 } [get_ports { vga_r[4] }]; #IO_L15P_T2_DQS_12 Sch=vga_r[7]
-
-# set_property -dict { PACKAGE_PIN AF20  IOSTANDARD LVCMOS33 } [get_ports { vga_hs }]; #IO_L19P_T3_12 Sch=vga_hs
-# set_property -dict { PACKAGE_PIN AG23  IOSTANDARD LVCMOS33 } [get_ports { vga_vs }]; #IO_L13N_T2_MRCC_12 Sch=vga_vs
+set_property -dict { PACKAGE_PIN AH20  IOSTANDARD LVCMOS33 } [get_ports { vga_b[0] }]; #IO_L22N_T3_12 Sch=vga_b[3]
+set_property -dict { PACKAGE_PIN AG20  IOSTANDARD LVCMOS33 } [get_ports { vga_b[1] }]; #IO_L22P_T3_12 Sch=vga_b[4]
+set_property -dict { PACKAGE_PIN AF21  IOSTANDARD LVCMOS33 } [get_ports { vga_b[2] }]; #IO_L19N_T3_VREF_12 Sch=vga_b[5]
+set_property -dict { PACKAGE_PIN AK20  IOSTANDARD LVCMOS33 } [get_ports { vga_b[3] }]; #IO_L24P_T3_12 Sch=vga_b[6]
+set_property -dict { PACKAGE_PIN AG22  IOSTANDARD LVCMOS33 } [get_ports { vga_b[4] }]; #IO_L20P_T3_12 Sch=vga_b[7]
+
+set_property -dict { PACKAGE_PIN AJ23  IOSTANDARD LVCMOS33 } [get_ports { vga_g[0] }]; #IO_L21N_T3_DQS_12 Sch=vga_g[2]
+set_property -dict { PACKAGE_PIN AJ22  IOSTANDARD LVCMOS33 } [get_ports { vga_g[1] }]; #IO_L21P_T3_DQS_12 Sch=vga_g[3]
+set_property -dict { PACKAGE_PIN AH22  IOSTANDARD LVCMOS33 } [get_ports { vga_g[2] }]; #IO_L20N_T3_12 Sch=vga_g[4]
+set_property -dict { PACKAGE_PIN AK21  IOSTANDARD LVCMOS33 } [get_ports { vga_g[3] }]; #IO_L24N_T3_12 Sch=vga_g[5]
+set_property -dict { PACKAGE_PIN AJ21  IOSTANDARD LVCMOS33 } [get_ports { vga_g[4] }]; #IO_L23N_T3_12 Sch=vga_g[6]
+set_property -dict { PACKAGE_PIN AK23  IOSTANDARD LVCMOS33 } [get_ports { vga_g[5] }]; #IO_L17P_T2_12 Sch=vga_g[7]
+
+set_property -dict { PACKAGE_PIN AK25  IOSTANDARD LVCMOS33 } [get_ports { vga_r[0] }]; #IO_L15N_T2_DQS_12 Sch=vga_r[3]
+set_property -dict { PACKAGE_PIN AG25  IOSTANDARD LVCMOS33 } [get_ports { vga_r[1] }]; #IO_L18P_T2_12 Sch=vga_r[4]
+set_property -dict { PACKAGE_PIN AH25  IOSTANDARD LVCMOS33 } [get_ports { vga_r[2] }]; #IO_L18N_T2_12 Sch=vga_r[5]
+set_property -dict { PACKAGE_PIN AK24  IOSTANDARD LVCMOS33 } [get_ports { vga_r[3] }]; #IO_L17N_T2_12 Sch=vga_r[6]
+set_property -dict { PACKAGE_PIN AJ24  IOSTANDARD LVCMOS33 } [get_ports { vga_r[4] }]; #IO_L15P_T2_DQS_12 Sch=vga_r[7]
+
+set_property -dict { PACKAGE_PIN AF20  IOSTANDARD LVCMOS33 } [get_ports { vga_hs }]; #IO_L19P_T3_12 Sch=vga_hs
+set_property -dict { PACKAGE_PIN AG23  IOSTANDARD LVCMOS33 } [get_ports { vga_vs }]; #IO_L13N_T2_MRCC_12 Sch=vga_vs
 
 ## HDMI in
 #set_property -dict { PACKAGE_PIN Y21   IOSTANDARD LVCMOS33 } [get_ports { hdmi_rx_cec }]; #IO_L2P_T0_12 Sch=hdmi_rx_cec
@@ -506,8 +506,8 @@ set_property -dict { PACKAGE_PIN Y29   IOSTANDARD LVCMOS33 } [get_ports { jtag_t
 #set_property -dict { PACKAGE_PIN R21   IOSTANDARD LVCMOS33 } [get_ports { QSPI_D[3] }]; #IO_L2N_T0_D03_14 Sch=qspi_d[3]
 
 ## IIC Bus
-# set_property -dict { PACKAGE_PIN AE30  IOSTANDARD LVCMOS33 } [get_ports { i2c_scl_io }]; #IO_L16P_T2_13 Sch=sys_scl
-# set_property -dict { PACKAGE_PIN AF30  IOSTANDARD LVCMOS33 } [get_ports { i2c_sda_io }]; #IO_L16N_T2_13 Sch=sys_sda
+set_property -dict { PACKAGE_PIN AE30  IOSTANDARD LVCMOS33 } [get_ports { i2c_scl_io }]; #IO_L16P_T2_13 Sch=sys_scl
+set_property -dict { PACKAGE_PIN AF30  IOSTANDARD LVCMOS33 } [get_ports { i2c_sda_io }]; #IO_L16N_T2_13 Sch=sys_sda
 
 ## Display Port IN
 #set_property -dict { PACKAGE_PIN AC19  IOSTANDARD LVCMOS18 } [get_ports { RX_AUX_IN_CH_N }]; #IO_L17N_T2_32 Sch=rx_aux_ch_n

diff --git a/target/xilinx/sim/simulate.mk → target/xilinx/sim/sim.mk b/target/xilinx/sim/simulate.mk → target/xilinx/sim/sim.mk
diff --git a/target/xilinx/src/cheshire_top_xilinx.sv b/target/xilinx/src/cheshire_top_xilinx.sv
@@ -297,7 +297,7 @@ module cheshire_top_xilinx
   //////////////
 
 `ifdef USE_DDR
-  dram_wrapper #(
+  dram_wrapper_xilinx #(
     .axi_soc_aw_chan_t ( axi_llc_aw_chan_t ),
     .axi_soc_w_chan_t  ( axi_llc_w_chan_t  ),
     .axi_soc_b_chan_t  ( axi_llc_b_chan_t  ),

diff --git a/target/xilinx/src/dram_wrapper.sv → target/xilinx/src/dram_wrapper_xilinx.sv b/target/xilinx/src/dram_wrapper.sv → target/xilinx/src/dram_wrapper_xilinx.sv
@@ -9,7 +9,7 @@
 `include "phy_definitions.svh"
 `include "common_cells/registers.svh"
 
-module dram_wrapper #(
+module dram_wrapper_xilinx #(
     parameter type axi_soc_aw_chan_t = logic,
     parameter type axi_soc_w_chan_t  = logic,
     parameter type axi_soc_b_chan_t  = logic,

diff --git a/target/xilinx/src/phy_definitions.svh b/target/xilinx/src/phy_definitions.svh
@@ -23,6 +23,8 @@
   `define USE_DDR3
   `define USE_FAN
   `define USE_VIO
+  `define USE_I2C
+  `define USE_VGA
 `endif
 
 `ifdef TARGET_ZCU102