Squashed commit of the following:

commit 7c0a061 Author: SoftFever <[email protected]> Date: Sun Dec 3 20:23:55 2023 +0800 Fix mac notary commit be1bd08 Author: SoftFever <[email protected]> Date: Sun Dec 3 09:20:29 2023 +0800 Fix precise wall for Arachne wall generator (SoftFever#2966) Update WIKI for it commit f052206 Author: SoftFever <[email protected]> Date: Sat Dec 2 12:45:02 2023 +0800 Improve PA calibration Line method so it works for bed origin not in (0,0) commit e502ffa Author: SoftFever <[email protected]> Date: Sat Dec 2 01:47:24 2023 +0800 Update locale commit 7237855 Author: SoftFever <[email protected]> Date: Thu Nov 30 23:58:52 2023 +0800 Build release branches commit a18f42e Author: SoftFever <[email protected]> Date: Sat Dec 2 01:27:22 2023 +0800 bump version to V1.8.1 commit b4b9805 Author: SoftFever <[email protected]> Date: Sat Dec 2 01:27:09 2023 +0800 disable misleading 3mf version warning commit e823044 Author: SoftFever <[email protected]> Date: Fri Dec 1 23:13:26 2023 +0800 Improve arc fitting when new overhang slowdown is used (SoftFever#2942) (cherry picked from commit 3923b9c) commit f2f2ede Author: SoftFever <[email protected]> Date: Sat Dec 2 01:27:43 2023 +0800 thick internal bridges (SoftFever#2954) commit 3a8b799 Author: Ioannis Giannakas <[email protected]> Date: Fri Dec 1 15:50:58 2023 +0000 Internal Bridge Flow rate parameter introduction Updated internal bridging flow change and reverted bridge PR (SoftFever#2943) Updated internal bridging flow change & reverted bridge PR (cherry picked from commit ae9a2d5) Internal Bridge Flow rate parameter introduction (SoftFever#2859) * Internal Bridge Flow rate parameter introduction * updated incorrect capitalisation * Updated parameter ordering (cherry picked from commit ce9a8d7) commit 5676e0e Author: SoftFever <[email protected]> Date: Sun Nov 19 19:08:04 2023 +0800 Merge pull request SoftFever#2780 from Noisyfox:bugfix/amd-png Fix PNG build plate texture not rendering on AMD GPUs (cherry picked from commit 93f62a4) commit 8829853 Author: SoftFever <[email protected]> Date: Fri Dec 1 22:27:27 2023 +0800 Revert "Adding new nozzle profiles for the Creality Ender-5 Pro (2019) (SoftFever#2817)" This reverts commit 09a8fa3. commit 09a8fa3 Author: Paul <[email protected]> Date: Wed Nov 29 15:32:58 2023 +0100 Adding new nozzle profiles for the Creality Ender-5 Pro (2019) (SoftFever#2817) * Add 0.6mm Nozzle Configurations for CE5Pro * Add 0.5mm Nozzle Configurations for CE5Pro * Add Nozzle Size Printer Variants 0.2-1.0mm * Add 0.3mm Printer Variant * Add 0.5mm Printer Variant * Fix: 0.6mm Printer Variant * Add Remaining Printer Variants * Add CE5Pro Nozzles to list of Compatible Filament * Add Generic FDM Process for Creality 0.3 Nozzle * Update Generic FDM Process for Creality 0.6 Nozzle * Add FDM Process for Remaining Creality Nozzle * Add Processes For CE5Pro 0.8mm Nozzle * Add Processes For CE5Pro 1.0mm Nozzle * Add Processes For CE5Pro 0.2mm Nozzle * Fix Initial Layer Settings * Add Processes For CE5Pro 0.25mm Nozzle * Add Processes For CE5Pro 0.3mm Nozzle * Remove Profiles Outside their Min/Max Layer Height * Update CE5Pro 0.4 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.2 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.25 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.3 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.5 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.6 Nozzle Naming Scheme to PR1100 * Update CE5Pro 0.8 Nozzle Naming Scheme to PR1100 * Update CE5Pro 1.0 Nozzle Naming Scheme to PR1100 * Incl. Remaining Base Config That Diff Is Based On * Remove whitespace (cherry picked from commit eab8139) commit 4dbd866 Author: Andy <[email protected]> Date: Wed Nov 29 21:33:52 2023 +0700 Russian translation update OrcaSlicer V1.8.0 Release. (SoftFever#2873) * Russian translation update Russian translation update * Russian translation update Russian translation update (cherry picked from commit 48c9143) commit c122c76 Author: Trist0ne <[email protected]> Date: Wed Nov 29 09:35:30 2023 -0500 T500 profile fixes and optimizations (SoftFever#2848) Corrected corrupted buildplate texture, corrected too high accelerations that made printing 0.4mm impossible, optimized T500 print and filament profiles with testing (cherry picked from commit 10a0f58) commit 79a7221 Author: FlashforgeOfficial <[email protected]> Date: Wed Nov 29 22:36:09 2023 +0800 Flashforge: Machine G-code Fix (SoftFever#2922) Machine G-code Fix (cherry picked from commit 930eac0) commit 5f89963 Author: Ioannis Giannakas <[email protected]> Date: Mon Nov 27 13:39:16 2023 +0000 Fix crash when closing application (SoftFever#2904) * Update GUI_ObjectList.cpp * Update GUI_ObjectList.cpp (cherry picked from commit d71eaf9) commit b5b5e03 Author: Ioannis Giannakas <[email protected]> Date: Tue Nov 28 12:44:29 2023 +0000 Fix purging not working for BBL printers (SoftFever#2912) commit f5ec607 Author: SoftFever <[email protected]> Date: Fri Nov 17 20:00:12 2023 +0800 update WIKI commit cb038d0 Author: SoftFever <[email protected]> Date: Fri Nov 17 20:00:05 2023 +0800 fix Prusa MK3S and Mini profile issues Fixed SoftFever#2768 commit 698440d Author: mariuske <[email protected]> Date: Fri Nov 17 12:40:03 2023 +0100 Removed print_flow_ratio from Flashforge process (SoftFever#2769) For some reason this value stayed in this profile file after a recent merge and it's now been removed again. commit b264203 Author: Noisyfox <[email protected]> Date: Fri Nov 17 14:28:48 2023 +0800 Fix creality k1/max default materials (SoftFever#2609) (SoftFever#2767) commit 4dcfd97 Author: SVNMLR <[email protected]> Date: Fri Nov 17 01:01:52 2023 +0100 [Multi Material] Fix first layers of prime tower when using "no sparse layers" (SoftFever#2764) * MM - Add check for first layer * Change: If no sparse layer is on -> Respect the toolchange in the first-layer checkup, to use a brim and slow down printspeed if using a primetower * Fix comment commit 9505f93 Author: SoftFever <[email protected]> Date: Fri Nov 17 07:54:59 2023 +0800 fix thumbnails regression commit bc05653 Author: SoftFever <[email protected]> Date: Thu Nov 16 23:25:28 2023 +0800 orca bot: processing issues in ascending order commit 9af22da Author: SoftFever <[email protected]> Date: Thu Nov 16 23:17:59 2023 +0800 bump version to 1.8 commit 09c77c4 Author: SoftFever <[email protected]> Date: Thu Nov 16 23:02:10 2023 +0800 update profile version to 1.08.00.00 commit 6c957d4 Author: mariuske <[email protected]> Date: Thu Nov 16 15:07:02 2023 +0100 Restructured Flashforge process profiles (SoftFever#2718) * Restructured Flashforge process profiles * Fixed typo in machine profiles * Changed skirt loops to 2 Based on best practise (other profiles), I have changed the number of skirt loops from 1 to 2 commit 75c019a Author: Andy <[email protected]> Date: Thu Nov 16 21:02:13 2023 +0700 Russian translation update (SoftFever#2760) Russian translation update commit 7566df5 Author: SoftFever <[email protected]> Date: Thu Nov 16 19:42:30 2023 +0800 fix snapmaker J1 not displaying bug fixed SoftFever#2750 commit 2fc5a7d Author: Noisyfox <[email protected]> Date: Thu Nov 16 19:15:37 2023 +0800 Fix layer height modifier layout (SoftFever#2708) (SoftFever#2756) commit 565732a Author: SoftFever <[email protected]> Date: Thu Nov 16 19:07:40 2023 +0800 remove print_flow_ratio from profiles and hide it from process setting. It should be only displayed for parts commit e8ac157 Author: FlyingbearOfficial <[email protected]> Date: Thu Nov 16 18:46:32 2023 +0800 Flyingbear official patch 9 (SoftFever#2746) * Add a new brand named Flyingbear Add a new brand named Flyingbear Model name: Flyingbear Reborn3 * Update fdm_machine_common.json fix z_hop 0,2(2) * make bed model smaller and set default internal_solid_infill_pattern to monotonic --------- Co-authored-by: SoftFever <[email protected]> commit 24ae038 Author: Fabio Forcina <[email protected]> Date: Thu Nov 16 11:18:50 2023 +0100 Italian translation (SoftFever#2706) * Update OrcaSlicer_it.po * Italian translation Italian translation * fix errors --------- Co-authored-by: SoftFever <[email protected]> commit f61c504 Author: Exerqtor <[email protected]> Date: Thu Nov 16 11:13:08 2023 +0100 Fix for QOI thumbnails not working (SoftFever#2755) Fix for QOI not working Should remidy the issues in SoftFever#2741
printago · Dec 4, 2023 · 655591e · 655591e
1 parent 90ddc33
commit 655591e
Show file tree

Hide file tree

Showing 142 changed files with 5,989 additions and 3,535 deletions.
diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
@@ -4,6 +4,7 @@ on:
     push:
       branches: 
        - main
+       - release/*
       paths:
        - 'src/**'
        - '**/CMakeLists.txt'
@@ -15,6 +16,7 @@ on:
     pull_request:
       branches: 
        - main 
+       - release/*
       paths:
        - 'src/**'
        - '**/CMakeLists.txt'
@@ -108,7 +110,7 @@ jobs:
 
  # Thanks to RaySajuuk, it's working now
       - name: Sign app and notary
-        if: github.ref == 'refs/heads/main' && matrix.os == 'macos-12'
+        if: (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && matrix.os == 'macos-12'
         working-directory: ${{ github.workspace }}
         env:
           BUILD_CERTIFICATE_BASE64: ${{ secrets.BUILD_CERTIFICATE_BASE64 }}

diff --git a/.github/workflows/orca_bot.yml b/.github/workflows/orca_bot.yml
@@ -16,6 +16,7 @@ jobs:
           days-before-issue-close: 14
           operations-per-run: 1000
           stale-issue-label: "stale"
+          ascending: true
           stale-issue-message: "GitHub bot: this issue is stale because it has been open for 90 days with no activity."
           close-issue-message: "GitHub bot: This issue was closed because it has been inactive for 14 days since being marked as stale."
           days-before-pr-stale: -1

diff --git a/README.md b/README.md
@@ -8,7 +8,7 @@ You can download Orca Slicer - Printago Edition here: [github releases page](htt
 # Main features
 - Auto calibrations for all printers
 - Sandwich(inner-outer-inner) mode - an improved version of the `External perimeters first` mode
-- Precise wall
+- [Precise wall](https://github.com/SoftFever/OrcaSlicer/wiki/Precise-wall)
 - Polyholes conversion support [SuperSlicer Wiki: Polyholes](https://github.com/supermerill/SuperSlicer/wiki/Polyholes)
 - Klipper support
 - More granular controls

diff --git a/doc/Chamber-temperature.md b/doc/Chamber-temperature.md
@@ -21,7 +21,7 @@ Bellow is a reference configuration for Klipper.
 [heater_generic chamber_heater]
 heater_pin:PB10
 max_power:1.0
-# Note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
+# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
 sensor_type:NTC 100K MGB18-104F39050L32
 sensor_pin:PA1
 control = pid
@@ -43,6 +43,8 @@ gcode:
         M117 Chamber heating cancelled
     {% else %}
         SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}
+        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating
+        # M140 S100
         TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1}
         M117 Chamber at target temperature
     {% endif %}

diff --git a/doc/Precise-wall.md b/doc/Precise-wall.md
@@ -0,0 +1,13 @@
+The 'Precise Wall' is a distinctive feature introduced by OrcaSlicer, aimed at improving the dimensional accuracy of prints and minimizing layer inconsistencies by slightly increasing the spacing between the outer wall and the inner wall.
+
+Below is a technical explanation of how this feature works. 
+First, it's important to understand some basic concepts like flow, extrusion width, and space. Slic3r has an excellent document that covers these topics in detail. You can refer to this article: [link to article](https://manual.slic3r.org/advanced/flow-math).
+
+Now, let's dive into the specifics. Slic3r and its forks, such as PrusaSlicer, SuperSlicer, and OrcaSlicer, assume that the extrusion path has an oval shape, which accounts for the overlaps. For example, if we set the wall width to 0.4mm and the layer height to 0.2mm, the combined thickness of two walls laid side by side is 0.714mm instead of 0.8mm due to the overlapping.
+![image](https://github.com/SoftFever/OrcaSlicer/assets/103989404/924d8df8-992c-4d55-b97d-fb85455fab5b)
+This approach enhances the strength of 3D-printed parts. However, it does have some side effects. For instance, when the inner-outer wall order is used, the outer wall can be pushed outside, leading to potential size inaccuracy and more layer inconsistency.
+
+It's important to keep in mind that this approach to handling flow is specific to Slic3r and it's forks. Other slicing software, such as Cura, assumes that the extrusion path is rectangular and, therefore, does not include overlapping. Two 0.4 mm walls will result in a 0.8 mm shell thickness in Cura
+
+OrcaSlicer adheres to Slic3r's approach to handling flow. To address the downsides mentioned earlier, OrcaSlicer introduced the 'Precise Wall' feature. When this feature is enabled in OrcaSlicer, the overlap between the outer wall and its adjacent inner wall is set to zero. This ensures that the overall strength of the printed part is unaffected, while the size accuracy and layer consistency are improved.
+
diff --git a/doc/Print-settings.md b/doc/Print-settings.md
@@ -4,4 +4,5 @@ Print settings:
 * [Axiliary fan](auxiliary-fan)
 * [Chamber temperature](chamber-temperature)
 * [Air filtration/Exhaust fan](air-filtration)
-* [Single Extruder Multimaterial](semm)
+* [Single Extruder Multimaterial](semm)
+* [Precise wall](Precise-wall)
diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-12-02 13:02+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <[email protected]>\n"

diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-10 14:54+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <[email protected]>\n"
 "Language-Team: \n"
@@ -658,7 +658,8 @@ msgid ""
 "Please note, application settings will be lost, but printer profiles will "
 "not be affected."
 msgstr ""
-"Soubor konfigurace programu OrcaSlicer může být poškozen a nelze ho analyzovat.\n"
+"Soubor konfigurace programu OrcaSlicer může být poškozen a nelze ho "
+"analyzovat.\n"
 "OrcaSlicer se pokusil znovu vytvořit konfigurační soubor.\n"
 "Všimněte si, že nastavení aplikace bude ztraceno, ale profily tiskárny "
 "nebudou ovlivněny."
@@ -4620,28 +4621,6 @@ msgstr "Nelze načíst konfiguraci."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr "3mf je generován starým Orca Slicerem, načtěte pouze geometrická data."
 
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Verze 3mf %s je novější než verze %s %s, byly nalezeny následující klíče "
-"nerozpoznaný:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Měli byste aktualizovat software.\n"
-
-msgid "Newer 3mf version"
-msgstr "Novější verze 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Verze %s zařízení 3mf je novější než verze %s %s, navrhněte upgrade vašeho "
-"software."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "V 3mf byly nalezeny neplatné hodnoty:"
 
@@ -7720,6 +7699,15 @@ msgstr ""
 "Snižte tuto hodnotu mírně (například 0,9), abyste snížili množství materiálu "
 "pro most a zlepšili prověšení"
 
+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Poměr průtoku horní vrstvy"
 
@@ -8042,6 +8030,15 @@ msgstr ""
 "Pokud je zakázáno, mosty vypadají lépe, ale jsou spolehlivé jen pro kratší "
 "přemostění."
 
+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Maximální délka mostu"
 
@@ -8327,8 +8324,8 @@ msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
 "and should be accurate"
 msgstr ""
-"Průměr filamentu se používá k výpočtu extruze v gkódu, takže je důležitý "
-"a měl by být přesný"
+"Průměr filamentu se používá k výpočtu extruze v gkódu, takže je důležitý a "
+"měl by být přesný"
 
 msgid "Shrinkage"
 msgstr "Smrštění"
@@ -9159,8 +9156,8 @@ msgid ""
 "layer height. Too high value results in overextrusion on the surface"
 msgstr ""
 "Množství materiálu, které se má vytlačit během žehlení. V poměru k průtoku "
-"normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrné extruzi "
-"na povrchu"
+"normální výšky vrstvy. Příliš vysoká hodnota vede k nadměrné extruzi na "
+"povrchu"
 
 msgid "Ironing line spacing"
 msgstr "Řádkování žehlení"
@@ -9365,22 +9362,23 @@ msgstr ""
 "tiskárna přechází z extruze s vysokým průtokem (vysoká rychlost/větší šířka) "
 "na extruzi s nižším průtokem (nižší rychlost/menší šířka) a naopak.\n"
 "\n"
-"Definuje maximální rychlost, kterou může objemový průtok extrudovaného materiálu "
-"v mm3/s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny větší změny "
-"extruzní rychlosti, což vede k rychlejším přechodům rychlosti.\n"
+"Definuje maximální rychlost, kterou může objemový průtok extrudovaného "
+"materiálu v mm3/s měnit v čase. Vyšší hodnoty znamenají, že jsou povoleny "
+"větší změny extruzní rychlosti, což vede k rychlejším přechodům rychlosti.\n"
 "\n"
 "Hodnota 0 funkci zakáže. \n"
 "\n"
-"Pro tiskárny s přímým pohonem a vysokou rychlostí a průtokem (např. Bambu lab "
-"nebo Voron) tato hodnota obvykle není potřebná. Nicméně v některých případech, "
-"kde se rychlosti funkcí výrazně liší, může poskytnout marginální přínos. "
-"Například při agresivních zpomaleních způsobených přesahy. V těchto případech "
-"se doporučuje vysoká hodnota kolem 300-350 mm3/s2, protože to umožňuje dostatečné "
-"vyhlazení pro pomoc při dosažení plynulejšího přechodu tlaku při extruzi.\n"
+"Pro tiskárny s přímým pohonem a vysokou rychlostí a průtokem (např. Bambu "
+"lab nebo Voron) tato hodnota obvykle není potřebná. Nicméně v některých "
+"případech, kde se rychlosti funkcí výrazně liší, může poskytnout marginální "
+"přínos. Například při agresivních zpomaleních způsobených přesahy. V těchto "
+"případech se doporučuje vysoká hodnota kolem 300-350 mm3/s2, protože to "
+"umožňuje dostatečné vyhlazení pro pomoc při dosažení plynulejšího přechodu "
+"tlaku při extruzi.\n"
 "\n"
 "Pro pomalejší tiskárny bez tlakového předstihu by měla být hodnota nastavena "
-"mnohem nižší. Pro přímé pohony je hodnota 10-15 mm3/s2 dobrým výchozím bodem, "
-"a pro styl Bowden 5-10 mm3/s2. \n"
+"mnohem nižší. Pro přímé pohony je hodnota 10-15 mm3/s2 dobrým výchozím "
+"bodem, a pro styl Bowden 5-10 mm3/s2. \n"
 "\n"
 "Tato funkce je známa jako Pressure Equalizer v programu Prusa Slicer.\n"
 "\n"
@@ -9870,9 +9868,9 @@ msgid ""
 "if a wipe action is executed immediately following an outer wall extrusion, "
 "the speed of the outer wall extrusion will be utilized for the wipe action."
 msgstr ""
-"Rychlost čištění je určena rychlostí aktuální role extruze, např. pokud "
-"je činnost čištění provedena bezprostředně po extruzi vnější stěny, "
-"rychlost extruze vnější stěny bude využita pro činnost čištění."
+"Rychlost čištění je určena rychlostí aktuální role extruze, např. pokud je "
+"činnost čištění provedena bezprostředně po extruzi vnější stěny, rychlost "
+"extruze vnější stěny bude využita pro činnost čištění."
 
 msgid "Wipe on loops"
 msgstr "Čistit na smyčce"
@@ -9881,8 +9879,8 @@ msgid ""
 "To minimize the visibility of the seam in a closed loop extrusion, a small "
 "inward movement is executed before the extruder leaves the loop."
 msgstr ""
-"Aby byla minimalizována viditelnost švu při extruzi s uzavřenou smyčkou, "
-"je proveden malý pohyb dovnitř předtím, než vytlačovací stroj opustí smyčku."
+"Aby byla minimalizována viditelnost švu při extruzi s uzavřenou smyčkou, je "
+"proveden malý pohyb dovnitř předtím, než vytlačovací stroj opustí smyčku."
 
 msgid "Wipe speed"
 msgstr "Rychlost čištění"
@@ -10560,9 +10558,9 @@ msgid ""
 "Move nozzle along the last extrusion path when retracting to clean leaked "
 "material on nozzle. This can minimize blob when print new part after travel"
 msgstr ""
-"Při retrakci přesuňte trysku podél poslední dráhy extruze, abyste "
-"vyčistili uniklý materiál na trysce. To může minimalizovat skvrny při tisku "
-"nového dílu po cestě"
+"Při retrakci přesuňte trysku podél poslední dráhy extruze, abyste vyčistili "
+"uniklý materiál na trysce. To může minimalizovat skvrny při tisku nového "
+"dílu po cestě"
 
 msgid "Wipe Distance"
 msgstr "Vzdálenost čištění"
@@ -10777,10 +10775,10 @@ msgid ""
 "Wipe tower is only compatible with relative mode. It is always enabled on "
 "BambuLab printers. Default is checked"
 msgstr ""
-"Při použití volby \"label_objects\" se doporučuje relativní extruzi. "
-"Některé extrudery fungují lépe, když je tato možnost odškrtnuta (režim "
-"absolutní extruze). Čistící věž je kompatibilní pouze s relativním "
-"režimem. Na tiskárnách BambuLab je vždy povolen. Výchozí je zaškrtnuto"
+"Při použití volby \"label_objects\" se doporučuje relativní extruzi. Některé "
+"extrudery fungují lépe, když je tato možnost odškrtnuta (režim absolutní "
+"extruze). Čistící věž je kompatibilní pouze s relativním režimem. Na "
+"tiskárnách BambuLab je vždy povolen. Výchozí je zaškrtnuto"
 
 msgid ""
 "Classic wall generator produces walls with constant extrusion width and for "
@@ -12373,6 +12371,28 @@ msgstr ""
 "při tisku filamentu s nižší teplotou a vyšší teplotě uzavřeného prostoru. "
 "Další informace naleznete ve Wiki."
 
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Verze 3mf %s je novější než verze %s %s, byly nalezeny následující klíče "
+#~ "nerozpoznaný:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Měli byste aktualizovat software.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Novější verze 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Verze %s zařízení 3mf je novější než verze %s %s, navrhněte upgrade "
+#~ "vašeho software."
+
 #~ msgid "Embeded"
 #~ msgstr "Vloženo"