Agent to integrate Cypress with ReportPortal.

• More about Cypress
• More about ReportPortal

$ npm install --save-dev @reportportal/agent-js-cypress

There is a configuration guide for Cypress version 10 and above.

Add the following options to cypress.config.js.

const { defineConfig } = require('cypress');
const registerReportPortalPlugin = require('@reportportal/agent-js-cypress/lib/plugin');

module.exports = defineConfig({
  reporter: '@reportportal/agent-js-cypress',
  reporterOptions: {
    apiKey: '<API_KEY>',
    endpoint: 'https://your.reportportal.server/api/v1',
    project: 'Your reportportal project name',
    launch: 'Your launch name',
    description: 'Your launch description',
    attributes: [
      {
        key: 'attributeKey',
        value: 'attributeValue',
      },
      {
        value: 'anotherAttributeValue',
      },
    ],
  },
  e2e: {
    setupNodeEvents(on, config) {
      return registerReportPortalPlugin(on, config);
    },
  },
});

To see more options refer Options.

Add the following to your custom commands file (cypress/support/commands.js):

require('@reportportal/agent-js-cypress/lib/commands/reportPortalCommands');

See examples of usage here.

There is a configuration guide for Cypress version 9 and below.

Add the following options to cypress.json

{
  "reporter": "@reportportal/agent-js-cypress",
  "reporterOptions": {
    "apiKey": "<API_KEY>",
    "endpoint": "https://your.reportportal.server/api/v1",
    "project": "Your reportportal project name",
    "launch": "Your launch name",
    "description": "Your launch description",
    "attributes": [
      {
        "key": "attributeKey",
        "value": "attributeValue"
      },
      {
        "value": "anotherAttributeValue"
      }
    ]
  }
}

To see more options refer Options.

const registerReportPortalPlugin = require('@reportportal/agent-js-cypress/lib/plugin');

module.exports = (on, config) => registerReportPortalPlugin(on, config);

Add the following to your custom commands file (cypress/support/commands.js):

require('@reportportal/agent-js-cypress/lib/commands/reportPortalCommands');

The full list of available options presented below.

If you run Cypress tests programmatically or use cypress.config.js, you can simply overwrite them:

const updatedConfig = {
  ...config,
  reporterOptions: {
    ...config.reporterOptions,
    apiKey: process.env.RP_API_KEY,
  },
};

For security reasons, you can also set token as a part of Environment Variables, instead of sharing it in the config file:

ReportPortal provides the following custom commands for reporting logs into the current test.

• cy.log(message). Overrides standard Cypress cy.log(log). Reports message as an info log of the current test.
  

You can use the following methods to report logs and attachments with different log levels:

• cy.trace (message , file). Reports message and optional file as a log of the current test with trace log level.
• cy.logDebug (message , file). Reports message and optional file as a log of the current test with debug log level.
• cy.info (message , file). Reports message and optional file as log of the current test with info log level.
• cy.warn (message , file). Reports message and optional file as a log of the current test with warning log level.
• cy.error (message , file). Reports message and optional file as a log of the current test with error log level.
• cy.fatal (message , file). Reports message and optional file as a log of the current test with fatal log level.
• cy.launchTrace (message , file). Reports message and optional file as a log of the launch with trace log level.
• cy.launchDebug (message , file). Reports message and optional file as a log of the launch with debug log level.
• cy.launchInfo (message , file). Reports message and optional file as log of the launch with info log level.
• cy.launchWarn (message , file). Reports message and optional file as a log of the launch with warning log level.
• cy.launchError (message , file). Reports message and optional file as a log of the launch with error log level.
• cy.launchFatal (message , file). Reports message and optional file as a log of the launch with fatal log level.

file should be an object:

{
  name: "filename",
  type: "image/png",  // media type
  content: data,  // file content represented as 64base string
}

Note: The cy.debug RP command has been changed to cy.logDebug due to the command with the same name in Cypress 9.*.

addTestAttributes (attributes). Add attributes(tags) to the current test. Should be called inside of corresponding test.
attributes is array of pairs of key and value:

[{
  key: "attributeKey1",
  value: "attributeValue2",
}]

Key is optional field.

To integrate with Sauce Labs just add attributes:

[{
 "key": "SLID",
 "value": "# of the job in Sauce Labs"
}, {
 "key": "SLDC",
 "value": "EU (EU or US)"
}]

setTestDescription (description). Set text description to the current test. Should be called inside of corresponding test.

setTestCaseId (id, suite). Set test case id to the current test or suite. Should be called inside of corresponding test/suite.
id is a string test case Id.
suite (optional) is the title of the suite to which the specified test case id belongs. Should be provided just in case of reporting test case id for specified suite instead of current test.

ReportPortal provides the following custom commands for setting status to the current suite/spec.

• cy.setStatus(status, suite). Assign status to the current test or suite. Should be called inside of corresponding test/suite.
  status should be equal to one of the following values: passed, failed, stopped, skipped, interrupted, cancelled, info, warn.
  suite (optional) is the title of the suite to which you wish to set the status (all suite descriptions must be unique). Should be provided just in case of assign status for specified suite instead of current test.
  

You can use the shorthand forms of the cy.setStatus method:

• cy.setStatusPassed(suite). Assign passed status to the current test or suite.
• cy.setStatusFailed(suite). Assign failed status to the current test or suite.
• cy.setStatusSkipped(suite). Assign skipped status to the current test or suite.
• cy.setStatusStopped(suite). Assign stopped status to the current test or suite.
• cy.setStatusInterrupted(suite). Assign interrupted status to the current test or suite.
• cy.setStatusCancelled(suite). Assign cancelled status to the current test or suite.
• cy.setStatusInfo(suite). Assign info status to the current test or suite.
• cy.setStatusWarn(suite). Assign warn status to the current test or suite.

ReportPortal also provides the corresponding methods for setting status into the launch:

• setLaunchStatus(status). Assign status to the launch.
  status should be equal to one of the following values: passed, failed, stopped, skipped, interrupted, cancelled, info, warn.
  
• cy.setLaunchStatusPassed(). Assign passed status to the launch.
• cy.setLaunchStatusFailed(). Assign failed status to the launch.
• cy.setLaunchStatusSkipped(). Assign skipped status to the launch.
• cy.setLaunchStatusStopped(). Assign stopped status to the launch.
• cy.setLaunchStatusInterrupted(). Assign interrupted status to the launch.
• cy.setLaunchStatusCancelled(). Assign cancelled status to the launch.
• cy.setLaunchStatusInfo(). Assign info status to the launch.

To use custom filename in cy.screenshot function you should setup ReportRortal custom commands. Default usage of Cypress screenshot function is supported without additional setup.

By default Cypress create a separate run for each test file. This section describe how to report test items of different specs into the single launch. This feature needs information about Cypress configuration. To provide it to the reporter you need to install reportPortal plugin (see how to in this section).

Enable auto-merge in reporterOptions as shown below:

{
  ...
  "reporterOptions": {
    ...
    "autoMerge": true
  }
}

Please note, that autoMerge feature is unstable in some cases (f.e. when using cypress-grep or CLI arguments to specify the test amount that should be executed) and may lead to unfinished launches in ReportPortal. If this is a case, try Manual merge launches instead.

There is a possibility to merge all launches into a single launch at the end of the run. We advise using autoMerge option to merge results in one launch, but you can use this alternative option in case of you need to perform some additional actions before merge.

Edit cypress.config.js (or cypress.json for versions <=9) file. Set isLaunchMergeRequired option to true as shown below:

{
  ...
  reporterOptions: {
    ...
    isLaunchMergeRequired: true
  }
}

Update the Cypress configuration file with the code presented below (referring the issue https://github.com/reportportal/agent-js-cypress/issues/135#issue-1461470158).

const delay = async (ms: number) => new Promise((res) => setTimeout(res, ms));

const reportportalOptions = {
  //...
  isLaunchMergeRequired: true,
  //...
};

export default defineConfig({
  //...
  reporter: '@reportportal/agent-js-cypress',
  reporterOptions: reportportalOptions,
  e2e: {
    //...
    setupNodeEvents(on, config) {
      // keep Cypress running until the ReportPortal reporter is finished. this is a
      // very critical step, as otherwise results might not be completely pushed into
      // ReportPortal, resulting in unfinsihed launches and failing merges
      on('after:run', async () => {
        console.log('Wait for reportportal agent to finish...');
        while (glob.sync('rplaunchinprogress*.tmp').length > 0) {
          await delay(2000);
        }
        console.log('reportportal agent finished');
        if (reportportalOptions.isLaunchMergeRequired) {
          try {
            console.log('Merging launches...');
            await mergeLaunches(reportportalOptions);
            console.log('Launches successfully merged!');
            deleteLaunchFiles();
          } catch (mergeError) {
            console.error(mergeError);
          }
        }
      });
      registerReportPortalPlugin(on, config);
      return config;
    },
    //...
  },
});

deleteLaunchFiles example:

const fs = require("fs");
const glob = require("glob");

function deleteLaunchFiles() {
  const getLaunchTempFiles = () => {
    return glob.sync("rplaunch*.tmp");
  };
  const deleteTempFile = (filename) => {
    fs.unlinkSync(filename);
  };
  const files = getLaunchTempFiles();
  files.forEach(deleteTempFile);
}

Cypress can run recorded tests in parallel across multiple machines since version 3.1.0 (Cypress docs).
By default Cypress create a separate run for each test file. To merge all runs into one launch in Report Portal you need to provide autoMerge option together with parallel flag.
Since Cypress does not provide the ci_build_id to the reporter, you need to provide it manually using the CI_BUILD_ID environment variable (see Cypress docs for details).

Enable parallel in reporterOptions as shown below:

{
  ...
  reporterOptions: {
    ...
    parallel: true
  }
}

Here's an example of setting up parallel Cypress execution on several machines using GitHub Actions:

name: CI-pipeline

on:
  pull_request:

jobs:
  test:
    runs-on: ubuntu-latest
    container: cypress/browsers:node12.18.3-chrome87-ff82
    strategy:
      fail-fast: false
      matrix:
        containers: [1, 2, 3]
    env:
      CI_BUILD_ID: ${{ github.sha }}-${{ github.workflow }}-${{ github.event_name }}
    steps:
      - name: Checkout
        uses: actions/checkout@v2

      - name: 'UI Tests - Chrome'
        uses: cypress-io/github-action@v2
        with:
          config-file: cypress.json
          group: 'UI Tests - Chrome'
          spec: cypress/integration/*
          record: true
          parallel: true
        env:
          CYPRESS_RECORD_KEY: ${{ secrets.RECORD_KEY }}
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
          ACTIONS_RUNNER_DEBUG: true

Note: The example provided for Cypress version <= 9. For Cypress version >= 10 usage of cypress-io/github-action may be changed.

Specify the options in the cypress.config.js:

const { defineConfig } = require('cypress');
const createBundler = require('@bahmutov/cypress-esbuild-preprocessor');
const preprocessor = require('@badeball/cypress-cucumber-preprocessor');
const createEsbuildPlugin = require('@badeball/cypress-cucumber-preprocessor/esbuild').default;
const registerReportPortalPlugin = require('@reportportal/agent-js-cypress/lib/plugin');

module.exports = defineConfig({
  reporter: '@reportportal/agent-js-cypress',
  reporterOptions: {
    endpoint: 'http://your-instance.com:8080/api/v1',
    apiKey: 'reportportalApiKey',
    launch: 'LAUNCH_NAME',
    project: 'PROJECT_NAME',
    description: 'LAUNCH_DESCRIPTION',
  },
  e2e: {
    async setupNodeEvents(on, config) {
      await preprocessor.addCucumberPreprocessorPlugin(on, config);
      on(
        'file:preprocessor',
        createBundler({
          plugins: [createEsbuildPlugin(config)],
        }),
      );
      registerReportPortalPlugin(on, config);

      return config;
    },
    specPattern: 'cypress/e2e/**/*.feature',
    supportFile: 'cypress/support/e2e.js',
  },
});

At the moment it is not possible to subscribe to start and end of scenario steps events. To solve the problem with displaying steps in the ReportPortal, the agent provides special commands: cucumberStepStart, cucumberStepEnd. To work correctly, these commands must be called in the BeforeStep/AfterStep hooks.

import { BeforeStep, AfterStep } from '@badeball/cypress-cucumber-preprocessor';

BeforeStep((step) => {
  cy.cucumberStepStart(step);
});

AfterStep((step) => {
  cy.cucumberStepEnd(step);
});

You can avoid duplicating this logic in each step definitions. Instead, add it to the cypress/support/step_definitions.js file and include the path to this file in the stepDefinitions array (if necessary) within cucumber-preprocessor config. These hooks will be used for all step definitions.

Licensed under the Apache License v2.0