removing lint warnings..

core/cache_subsystem/cva6_icache.sv

@@ -137,16 +137,16 @@ module cva6_icache
   // latch this in case we have to stall later on
   // make sure this is 32bit aligned
   assign vaddr_d = (dreq_o.ready & dreq_i.req) ? dreq_i.vaddr : vaddr_q;
-  assign areq_o.fetch_vaddr = {vaddr_q >> 2, 2'b0};
+  assign areq_o.fetch_vaddr = {vaddr_q[riscv::VLEN-1:2], 2'b0};
 
   // split virtual address into index and offset to address cache arrays
   assign cl_index = vaddr_d[ICACHE_INDEX_WIDTH-1:ICACHE_OFFSET_WIDTH];
 
 
   if (CVA6Cfg.NOCType == config_pkg::NOC_TYPE_AXI4_ATOP) begin : gen_axi_offset
     // if we generate a noncacheable access, the word will be at offset 0 or 4 in the cl coming from memory
-    assign cl_offset_d = ( dreq_o.ready & dreq_i.req)      ? {dreq_i.vaddr>>2, 2'b0} :
-                         ( paddr_is_nc  & mem_data_req_o ) ? cl_offset_q[2]<<2 : // needed since we transfer 32bit over a 64bit AXI bus in this case
+    assign cl_offset_d = ( dreq_o.ready & dreq_i.req)      ? {dreq_i.vaddr[ICACHE_OFFSET_WIDTH-1:2], 2'b0} :
+                         ( paddr_is_nc  & mem_data_req_o ) ? {{ICACHE_OFFSET_WIDTH-1{1'b0}}, cl_offset_q[2]}<<2 : // needed since we transfer 32bit over a 64bit AXI bus in this case
         cl_offset_q;
     // request word address instead of cl address in case of NC access
     assign mem_data_o.paddr = (paddr_is_nc) ? {cl_tag_d, vaddr_q[ICACHE_INDEX_WIDTH-1:3], 3'b0} :                                         // align to 64bit

core/cache_subsystem/wt_axi_adapter.sv

@@ -56,7 +56,9 @@ module wt_axi_adapter
   // support up to 512bit cache lines
   localparam AxiNumWords = (ariane_pkg::ICACHE_LINE_WIDTH/CVA6Cfg.AxiDataWidth) * (ariane_pkg::ICACHE_LINE_WIDTH > ariane_pkg::DCACHE_LINE_WIDTH)  +
                            (ariane_pkg::DCACHE_LINE_WIDTH/CVA6Cfg.AxiDataWidth) * (ariane_pkg::ICACHE_LINE_WIDTH <= ariane_pkg::DCACHE_LINE_WIDTH) ;
-
+  localparam MaxNumWords = $clog2(CVA6Cfg.AxiDataWidth / 8);
+  localparam AxiRdBlenIcache = ariane_pkg::ICACHE_LINE_WIDTH / CVA6Cfg.AxiDataWidth - 1;
+  localparam AxiRdBlenDcache = ariane_pkg::DCACHE_LINE_WIDTH / CVA6Cfg.AxiDataWidth - 1;
 
   ///////////////////////////////////////////////////////
   // request path
@@ -130,11 +132,11 @@ module wt_axi_adapter
   // request side
   always_comb begin : p_axi_req
     // write channel
-    axi_wr_id_in = arb_idx;
-    axi_wr_data  = {(CVA6Cfg.AxiDataWidth/riscv::XLEN){dcache_data.data}};
-    axi_wr_user  = dcache_data.user;
+    axi_wr_id_in = {{CVA6Cfg.AxiIdWidth-1{1'b0}}, arb_idx};
+    axi_wr_data[0]  = {(CVA6Cfg.AxiDataWidth/riscv::XLEN){dcache_data.data}};
+    axi_wr_user[0]  = dcache_data.user;
     // Cast to AXI address width
-    axi_wr_addr  = dcache_data.paddr;
+    axi_wr_addr  = {{CVA6Cfg.AxiAddrWidth-riscv::PLEN{1'b0}}, dcache_data.paddr};
     axi_wr_size  = dcache_data.size;
     axi_wr_req   = 1'b0;
     axi_wr_blen  = '0;// single word writes
@@ -145,7 +147,7 @@ module wt_axi_adapter
     amo_gen_r_d  = amo_gen_r_q;
 
     // read channel
-    axi_rd_id_in = arb_idx;
+    axi_rd_id_in = {{CVA6Cfg.AxiIdWidth-1{1'b0}}, arb_idx};
     axi_rd_req   = 1'b0;
     axi_rd_lock  = '0;
     axi_rd_blen  = '0;
@@ -159,19 +161,18 @@ module wt_axi_adapter
     // arbiter mux
     if (arb_idx) begin
       // Cast to AXI address width
-      axi_rd_addr = dcache_data.paddr;
+      axi_rd_addr = {{CVA6Cfg.AxiAddrWidth-riscv::PLEN{1'b0}}, dcache_data.paddr};
       // If dcache_data.size MSB is set, we want to read as much as possible
-      axi_rd_size = dcache_data.size[2] ? $clog2(CVA6Cfg.AxiDataWidth / 8) : dcache_data.size;
+      axi_rd_size = dcache_data.size[2] ?  MaxNumWords[2:0] : dcache_data.size;
       if (dcache_data.size[2]) begin
-        axi_rd_blen = ariane_pkg::DCACHE_LINE_WIDTH / CVA6Cfg.AxiDataWidth - 1;
+        axi_rd_blen = AxiRdBlenDcache[$clog2(AxiNumWords)-1:0];
       end
     end else begin
       // Cast to AXI address width
-      axi_rd_addr = icache_data.paddr;
-      axi_rd_size =
-          $clog2(CVA6Cfg.AxiDataWidth / 8);  // always request max number of words in case of ifill
+      axi_rd_addr = {{CVA6Cfg.AxiAddrWidth-riscv::PLEN{1'b0}}, icache_data.paddr};
+      axi_rd_size = MaxNumWords[2:0]; // always request max number of words in case of ifill
       if (!icache_data.nc) begin
-        axi_rd_blen = ariane_pkg::ICACHE_LINE_WIDTH / CVA6Cfg.AxiDataWidth - 1;
+        axi_rd_blen = AxiRdBlenIcache[$clog2(AxiNumWords)-1:0];
       end
     end
 
@@ -245,11 +246,11 @@ module wt_axi_adapter
                    amo_off_d = dcache_data.paddr[$clog2(CVA6Cfg.AxiDataWidth/8)-1:0] & ~((1 << dcache_data.size[1:0]) - 1);
                  end
                  // RISC-V atops have a load semantic
-                 AMO_SWAP: axi_wr_atop  = {axi_pkg::ATOP_ATOMICLOAD, axi_pkg::ATOP_LITTLE_END, axi_pkg::ATOP_ATOMICSWAP};
+                 AMO_SWAP: axi_wr_atop  = axi_pkg::ATOP_ATOMICSWAP;
                  AMO_ADD:  axi_wr_atop  = {axi_pkg::ATOP_ATOMICLOAD, axi_pkg::ATOP_LITTLE_END, axi_pkg::ATOP_ADD};
                  AMO_AND:  begin
                    // in this case we need to invert the data to get a "CLR"
-                   axi_wr_data  = ~{(CVA6Cfg.AxiDataWidth/riscv::XLEN){dcache_data.data}};
+                   axi_wr_data[0]  = ~{(CVA6Cfg.AxiDataWidth/riscv::XLEN){dcache_data.data}};
                    axi_wr_user  = ~{(CVA6Cfg.AxiDataWidth/riscv::XLEN){dcache_data.user}};
                    axi_wr_atop  = {axi_pkg::ATOP_ATOMICLOAD, axi_pkg::ATOP_LITTLE_END, axi_pkg::ATOP_CLR};
                  end
@@ -434,7 +435,7 @@ module wt_axi_adapter
     if (icache_rtrn_rd_en) begin
       icache_first_d = axi_rd_last;
       if (ICACHE_LINE_WIDTH == CVA6Cfg.AxiDataWidth) begin
-        icache_rd_shift_d = axi_rd_data;
+        icache_rd_shift_d[0] = axi_rd_data;
       end else begin
         icache_rd_shift_d = {
           axi_rd_data, icache_rd_shift_q[ICACHE_LINE_WIDTH/CVA6Cfg.AxiDataWidth-1:1]
@@ -453,7 +454,7 @@ module wt_axi_adapter
     if (dcache_rtrn_rd_en) begin
       dcache_first_d = axi_rd_last;
       if (DCACHE_LINE_WIDTH == CVA6Cfg.AxiDataWidth) begin
-        dcache_rd_shift_d = axi_rd_data;
+        dcache_rd_shift_d[0] = axi_rd_data;
       end else begin
         dcache_rd_shift_d = {
           axi_rd_data, dcache_rd_shift_q[DCACHE_LINE_WIDTH/CVA6Cfg.AxiDataWidth-1:1]

core/instr_realign.sv

@@ -99,7 +99,7 @@ module instr_realign
           unaligned_instr_d = data_i[15:0];
           // the instruction isn't compressed but only the lower is ready
         end else begin
-          valid_o = 1'b1;
+          valid_o = {{INSTR_PER_FETCH-1{1'b0}}, 1'b1};
         end
       end
     end

core/scoreboard.sv

@@ -193,7 +193,7 @@ module scoreboard #(
     // Commit Port
     // ------------
     // we've got an acknowledge from commit
-    for (logic [CVA6Cfg.NrCommitPorts-1:0] i = 0; i < CVA6Cfg.NrCommitPorts; i++) begin
+    for (int i = 0; i < CVA6Cfg.NrCommitPorts; i++) begin
       if (commit_ack_i[i]) begin
         // this instruction is no longer in issue e.g.: it is considered finished
         mem_n[commit_pointer_q[i]].issued    = 1'b0;
@@ -221,7 +221,8 @@ module scoreboard #(
     assign num_commit = commit_ack_i[0];
   end
 
-  assign issue_cnt_n = (flush_i) ? '0 : issue_cnt_q - num_commit + issue_en;
+  assign issue_cnt_n = (flush_i) ? '0 : issue_cnt_q - {{BITS_ENTRIES-$clog2(CVA6Cfg.NrCommitPorts){1'b0}}, num_commit}
+                                                    + {{BITS_ENTRIES-1{1'b0}}, issue_en};
   assign commit_pointer_n[0] = (flush_i) ? '0 : commit_pointer_q[0] + num_commit;
   assign issue_pointer_n = (flush_i) ? '0 : issue_pointer_q + issue_en;
 
@@ -443,11 +444,11 @@ module scoreboard #(
   assert property (
     @(posedge clk_i) disable iff (!rst_ni) commit_ack_i[0] |-> commit_instr_o[0].valid)
   else $fatal(1, "Commit acknowledged but instruction is not valid");
-
-  assert property (
-    @(posedge clk_i) disable iff (!rst_ni) commit_ack_i[1] |-> commit_instr_o[1].valid)
-  else $fatal(1, "Commit acknowledged but instruction is not valid");
-
+  if (CVA6Cfg.NrCommitPorts == 2) begin : gen_two_commit_ports
+      assert property (
+        @(posedge clk_i) disable iff (!rst_ni) commit_ack_i[1] |-> commit_instr_o[1].valid)
+      else $fatal(1, "Commit acknowledged but instruction is not valid");
+  end
   // assert that we never give an issue ack signal if the instruction is not valid
   assert property (@(posedge clk_i) disable iff (!rst_ni) issue_ack_i |-> issue_instr_valid_o)
   else $fatal(1, "Issue acknowledged but instruction is not valid");

core/store_unit.sv

@@ -188,7 +188,7 @@ module store_unit
     st_be_n = lsu_ctrl_i.be;
     // don't shift the data if we are going to perform an AMO as we still need to operate on this data
     st_data_n = (CVA6Cfg.RVA && instr_is_amo) ? lsu_ctrl_i.data[riscv::XLEN-1:0] :
-        data_align(lsu_ctrl_i.vaddr[2:0], lsu_ctrl_i.data);
+        data_align(lsu_ctrl_i.vaddr[2:0], {{64-riscv::XLEN{1'b0}}, lsu_ctrl_i.data});
     st_data_size_n = extract_transfer_size(lsu_ctrl_i.operation);
     // save AMO op for next cycle
     if(CVA6Cfg.RVA) begin

corev_apu/tb/common/mock_uart.sv

@@ -57,6 +57,10 @@ module mock_uart (
         $write("%c", ch);
     endfunction : uart_tx
 
+/* verilator lint_off WIDTHTRUNC */
+/* verilator lint_off WIDTHEXPAND */
+/* verilator lint_off WIDTHCONCAT */
+
     always_ff @(posedge clk_i or negedge rst_ni) begin
         if (rst_ni) begin
             if (psel_i & penable_i & pwrite_i) begin
@@ -108,4 +112,9 @@ module mock_uart (
             endcase
         end
     end
+
+/* verilator lint_on WIDTHTRUNC */
+/* verilator lint_on WIDTHEXPAND */
+/* verilator lint_on WIDTHCONCAT */
+
 endmodule

verilator_config.vlt

@@ -6,14 +6,17 @@
 
 `verilator_config
 
-// TODO -> Please update the configuration file according to the warnings resolution
-// Timing flag issue CVA6 #1162, waiving it off
-lint_off -rule STMTDLY
+// waving these warnings since they are in vendor or core_apu
+lint_off -rule STMTDLY -file "*/corev_apu/*"
+lint_off -rule WIDTHEXPAND -file "*/common/local/util/sram.sv"
+lint_off -rule WIDTHTRUNC -file "*/core/include/std_cache_pkg.sv"
+lint_off -file "*/corev_apu/*"
+lint_off -file "*/vendor/*"
 
-// Big Endian usage issue CVA6 #1176, waiving it off
-lint_off -rule LITENDIAN
+lint_off -rule WIDTHEXPAND -file "*/core/cache_subsystem/axi_adapter.sv"
+lint_off -rule WIDTHEXPAND -file "*/core/axi_shim.sv"
 
-// New Line at the end of file in submodule register_interface, waiving it off
-// Commenting this out since CI Verilator does not recognize this rule
-// lint_off -rule EOFNEWLINE -file "corev_apu/*.svh"
-// lint_off -file "corev_apu/*.svh"
+// P2
+lint_off -rule WIDTHEXPAND -file "*/core/issue_read_operands.sv"
+lint_off -rule WIDTHEXPAND -file "*/core/ariane_regfile_ff.sv"
+lint_off -rule SELRANGE -file "*/core/commit_stage.sv"