[lutron] update instructions for LEAP authentication (#16510)

* [lutron] update instructions for LEAP authentication

Signed-off-by: Cody Cutrer <[email protected]>

bundles/org.openhab.binding.lutron/doc/leapnotes.md

@@ -3,34 +3,86 @@
 Unlike LIP, which was designed to use a simple serial or telnet connection and authenticates using a username/password, LEAP uses a SSL connection and authenticates using certificates.
 This necessarily makes configuration more complicated.
 There are several open source utilities available for generating the certificate files necessary to access your Caseta or RA2 Select hub.
-One good choice is the get_lutron_cert.py script included with the popular pylutron library which is available on Github at https://github.com/gurumitts/pylutron-caseta .
-On a unix-like system, you can easily retrieve it using curl with a command like:
+One good choice is included with the popular pylutron library which is available on Github at https://github.com/gurumitts/pylutron-caseta.
+On a Unix-like system, you can easily install it via `pip`:
 
+```bash
+$ pip install pylutron_caseta[cli]
+Defaulting to user installation because normal site-packages is not writeable
+Collecting pylutron_caseta[cli]
+...
+Installing collected packages: pylutron_caseta
+Successfully installed pylutron_caseta-0.20.0
 ```
-curl https://raw.githubusercontent.com/gurumitts/pylutron-caseta/dev/get_lutron_cert.py >get_lutron_cert.py
+
+First, you need to locate your bridge using `leap-scan`:
+```bash
+$ leap-scan
+Lutron-05701a1c.local. 192.168.1.10 fe80::5a2b:aee:ed11:c6d5
+<Ctrl-C>
+```
+
+Then, you can pair with the found device using the address found above:
+
+```bash
+$ lap-pair Lutron-05701a1c.local. --cert caseta.crt --key caseta.key --cacert caseta-bridge.crt
+Press the small black button on the back of the bridge to complete pairing.
+Successfully paired with 1.119
 ```
 
-Remember that the get_lutron_cert.py script must be run using python3, not 2!
-Also, the script will prompt you to press the button on your smart hub to authorize key generation, so you should be somewhere near the hub when you run it.
-Running it will not affect your existing hub configuration or Lutron app installations.
+Running this will not affect your existing hub configuration or Lutron app installations.
 When it has completed, it will have generated three files: caseta.crt, caseta.key, and caseta-bridge.crt.
 
 Once the key and certificate files have been generated, you will need to load them into a java keystore.
 
-
-You can load a keystore from the key and certificate files on a linux system with the following commands.
+You can load a keystore from the key and certificate files on a Linux system with the following commands.
 You’ll need access to both the java keytool and openssl.
 
-```
-openssl pkcs12 -export -in caseta.crt -inkey caseta.key -out caseta.p12 -name caseta
+```bash
+$ openssl pkcs12 -export -in caseta.crt -inkey caseta.key -out caseta.p12 -name caseta
+Enter Export Password:
+Verifying - Enter Export Password:
+$ keytool -importkeystore -destkeystore lutron.keystore -srckeystore caseta.p12 -srcstoretype PKCS12 -alias caseta
+Importing keystore caseta.p12 to lutron.keystore...
+Enter destination keystore password:  
+Re-enter new password: 
+Enter source keystore password: 
+$ keytool -importcert -file caseta-bridge.crt -keystore lutron.keystore -alias caseta-bridge
+Enter keystore password:  
+Owner: CN=SmartBridge572B0A11C6D5, O="Lutron Electronics Co., Inc.", L=Coopersburg, ST=Pennsylvania, C=US
+Issuer: CN=SmartBridge572B0A11C6D5, O="Lutron Electronics Co., Inc.", L=Coopersburg, ST=Pennsylvania, C=US
+Serial number: 1
+Valid from: Fri Oct 30 18:00:00 MDT 2015 until: Thu Oct 25 18:00:00 MDT 2035
+Certificate fingerprints:
+	 SHA1: 20:BE:07:23:0D:61:E7:EE:C4:17:C5:A2:6D:AB:85:0D:64:CF:2A:51
+	 SHA256: C3:51:D0:C0:8C:15:7D:21:34:6F:B6:91:5E:0F:03:85:AB:06:DB:74:63:2D:7B:22:F2:1C:CB:12:7E:3C:29:E2
+Signature algorithm name: SHA256withECDSA
+Subject Public Key Algorithm: 256-bit EC (secp256r1) key
+Version: 3
+
+Extensions: 
+
+#1: ObjectId: 2.5.29.19 Criticality=true
+BasicConstraints:[
+  CA:true
+  PathLen: no limit
+]
 
-keytool -importkeystore -destkeystore lutron.keystore -srckeystore caseta.p12 -srcstoretype PKCS12 -srcstorepass secret -alias caseta
+#2: ObjectId: 2.5.29.15 Criticality=true
+KeyUsage [
+  DigitalSignature
+  Key_Encipherment
+  Data_Encipherment
+  Key_Agreement
+  Key_CertSign
+  Crl_Sign
+]
 
-keytool -importcert -file caseta-bridge.crt -keystore lutron.keystore -alias caseta-bridge
+Trust this certificate? [no]:  yes
+Certificate was added to keystore
 ```
 
-Respond to the password prompt(s) with a password, and then use that password in the -srcstorepass parameter of the keytool command and in the keystorePassword parameter for leapbridge.
-In the example above, the pkcs12 store password was set to “secret”, but hopefully you can think of a better one!
+Respond to the password prompt(s) with a password.
 The lutron.keystore file that you end up with is the one you’ll need to give the binding access to.
 The caseta.p12 file is just an intermediate file that you can delete later.