Add feature receive Wake-On-Lan WOL on Arduino

examples/receiveWOLPacket/receiveWOLPacket.ino

@@ -0,0 +1,47 @@
+/*
+  Demo receiving WOL magic packets on Arduino, it can be used to send push notifications to Arduino.
+  rpm based linux: ether-wake 42:41:52:52:59:33
+  deb based linux: etherwake -i enp1s0 42:41:52:52:59:33  (replace enp1s0 with your network card id)
+
+*/
+
+#include <EtherCard.h>
+
+// ethernet interface mac address, must be unique on the LAN
+static byte mymac[] = { 0x42, 0x41, 0x52, 0x52, 0x59, 0x33 };  //ASCII: BARRY1
+byte Ethernet::buffer[700];
+const char hostname[] = "device.example.com";
+
+static uint32_t timer;
+
+void setup () {
+  Serial.begin(115200);
+  // Change 'SS' to your Slave Select pin, if you arn't using the default pin
+  if (ether.begin(sizeof Ethernet::buffer, mymac, SS) == 0)
+    Serial.println(F("Failed to access Ethernet controller"));
+  if (!ether.dhcpSetup(hostname, true))
+  {
+    Serial.println(F("DHCP failed"));
+  }
+
+  ether.printIp("IP:  ", ether.myip);
+  ether.printIp("GW:  ", ether.gwip);
+  ether.printIp("DNS: ", ether.dnsip);
+}
+
+void loop () {
+  ether.packetLoop(ether.packetReceive());
+
+  if (ether.pollWOLInterrupt())
+  {
+    wolReceived();
+  }
+}
+
+/* Method called when a WOL magic packet is received
+*/
+void wolReceived()
+{
+  ether.clearWOLInterrupt();
+  Serial.println(F("Magic Packet received!"));
+}

src/enc28j60.cpp

@@ -127,6 +127,22 @@ bool ENC28J60::promiscuous_enabled = false;
 #define EIR_WOLIF        0x04
 #define EIR_TXERIF       0x02
 #define EIR_RXERIF       0x01
+// ENC28J60 EWOLIE Register Bit Definitions
+#define EWOLIE_UCWOLIE   0x80
+#define EWOLIE_AWOLIE    0x40
+#define EWOLIE_PMWOLIE   0x10
+#define EWOLIE_MPWOLIE   0x08
+#define EWOLIE_HTWOLIE   0x04
+#define EWOLIE_MCWOLIE   0x02
+#define EWOLIE_BCWOLIE   0x01
+// ENC28J60 EWOLIR Register Bit Definitions
+#define EWOLIR_UCWOLIF   0x80
+#define EWOLIR_AWOLIF    0x40
+#define EWOLIR_PMWOLIF   0x10
+#define EWOLIR_MPWOLIF   0x08
+#define EWOLIR_HTWOLIF   0x04
+#define EWOLIR_MCWOLIF   0x02
+#define EWOLIR_BCWOLIF   0x01
 // ENC28J60 ESTAT Register Bit Definitions
 #define ESTAT_INT        0x80
 #define ESTAT_LATECOL    0x10
@@ -405,7 +421,8 @@ byte ENC28J60::initialize (uint16_t size, const byte* macaddr, byte csPin) {
     writeRegByte(MAADR0, macaddr[5]);
     writePhy(PHCON2, PHCON2_HDLDIS);
     SetBank(ECON1);
-    writeOp(ENC28J60_BIT_FIELD_SET, EIE, EIE_INTIE|EIE_PKTIE);
+    writeOp(ENC28J60_BIT_FIELD_SET, EIE, EIE_INTIE|EIE_PKTIE|EIE_WOLIE);
+    writeRegByte(EWOLIE, EWOLIE_MPWOLIE);
     writeOp(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
 
     byte rev = readRegByte(EREVID);
@@ -417,6 +434,22 @@ byte ENC28J60::initialize (uint16_t size, const byte* macaddr, byte csPin) {
     return rev;
 }
 
+void ENC28J60::clearWOLInterrupt () {
+    writeOp(ENC28J60_BIT_FIELD_CLR, EWOLIR, EWOLIR_MPWOLIF);
+    writeOp(ENC28J60_BIT_FIELD_CLR, EIR, EIR_WOLIF);
+}
+
+bool ENC28J60::pollWOLInterrupt () {
+   if((readRegByte(EWOLIR) & (EWOLIR_MPWOLIF)) == EWOLIR_MPWOLIF)
+   {
+      return true;
+   }
+   else
+   {
+      return false;
+   }
+}
+
 bool ENC28J60::isLinkUp() {
     return (readPhyByte(PHSTAT2) >> 2) & 1;
 }

src/enc28j60.h

@@ -59,6 +59,14 @@ class ENC28J60 {
     static uint8_t initialize (const uint16_t size, const uint8_t* macaddr,
                                uint8_t csPin = 8);
 
+    /**   @brief  Clear magic packet WOL interrupt flag
+    */
+    static void clearWOLInterrupt ();
+
+    /**   @brief  Read the WOL interrupt flag
+    */
+    static bool pollWOLInterrupt ();
+
     /**   @brief  Check if network link is connected
     *     @return <i>bool</i> True if link is up
     */