Repo-sync

Containers/apache/Dockerfile

@@ -2,7 +2,7 @@
 FROM caddy:2.8.4-alpine AS caddy
 
 # From https://github.com/docker-library/httpd/blob/master/2.4/alpine/Dockerfile
-FROM httpd:2.4.61-alpine3.20
+FROM httpd:2.4.62-alpine3.20
 
 COPY --from=caddy /usr/bin/caddy /usr/bin/caddy
 

Containers/borgbackup/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.20.1
+FROM alpine:3.20.2
 
 RUN set -ex; \
     \

Containers/clamav/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/Cisco-Talos/clamav-docker/blob/main/clamav/1.3/alpine/Dockerfile
-FROM clamav/clamav:1.3.1-60
+FROM clamav/clamav:1.3.1-61
 
 COPY clamav.conf /clamav.conf
 COPY --chmod=775 start.script /start.script

Containers/domaincheck/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.20.1
+FROM alpine:3.20.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache bash lighttpd netcat-openbsd; \

Containers/imaginary/Dockerfile

@@ -13,7 +13,7 @@ RUN set -ex; \
         build-base; \
     go install github.com/h2non/imaginary@"$IMAGINARY_HASH";
 
-FROM alpine:3.20.1
+FROM alpine:3.20.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache \

Containers/mastercontainer/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:27.0.3-cli AS docker
+FROM docker:27.1.1-cli AS docker
 
 # Caddy is a requirement
 FROM caddy:2.8.4-alpine AS caddy

Containers/nextcloud/entrypoint.sh

@@ -295,7 +295,6 @@ DATADIR_PERMISSION_CONF
                 php /var/www/html/occ app:disable updatenotification
                 rm -rf /var/www/html/apps/updatenotification
                 php /var/www/html/occ app:enable nextcloud-aio --force
-                php /var/www/html/occ db:add-missing-indices
                 php /var/www/html/occ db:add-missing-columns
                 php /var/www/html/occ db:add-missing-primary-keys
                 yes | php /var/www/html/occ db:convert-filecache-bigint
@@ -423,12 +422,12 @@ DATADIR_PERMISSION_CONF
             # Apply optimization
             echo "Doing some optimizations..."
             php /var/www/html/occ maintenance:repair
-            php /var/www/html/occ db:add-missing-indices
-            php /var/www/html/occ db:add-missing-columns
-            php /var/www/html/occ db:add-missing-primary-keys
-            yes | php /var/www/html/occ db:convert-filecache-bigint
-            php /var/www/html/occ maintenance:mimetype:update-js
-            php /var/www/html/occ maintenance:mimetype:update-db
+            if [ "$NEXTCLOUD_SKIP_DATABASE_OPTIMIZATION" != yes ]; then
+                php /var/www/html/occ db:add-missing-indices
+                php /var/www/html/occ db:add-missing-columns
+                php /var/www/html/occ db:add-missing-primary-keys
+                yes | php /var/www/html/occ db:convert-filecache-bigint
+            fi
         fi
     fi
 
@@ -504,9 +503,10 @@ if [ -n "$SERVERINFO_TOKEN" ] && [ -z "$(php /var/www/html/occ config:app:get se
     php /var/www/html/occ config:app:set serverinfo token --value="$SERVERINFO_TOKEN"
 fi
 # Set maintenance window so that no warning is shown in the admin overview
-if [ -z "$(php /var/www/html/occ config:system:get maintenance_window_start)" ]; then
-    php /var/www/html/occ config:system:set maintenance_window_start --type=int --value=100
+if [ -z "$NEXTCLOUD_MAINTENANCE_WINDOW" ]; then
+    NEXTCLOUD_MAINTENANCE_WINDOW=100
 fi
+php /var/www/html/occ config:system:set maintenance_window_start --type=int --value="$NEXTCLOUD_MAINTENANCE_WINDOW"
 
 # Apply network settings
 echo "Applying network settings..."

Containers/notify-push/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.20.1
+FROM alpine:3.20.2
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh

Containers/talk/Dockerfile

@@ -2,7 +2,7 @@
 FROM nats:2.10.18-scratch AS nats
 FROM eturnal/eturnal:1.12.0 AS eturnal
 FROM strukturag/nextcloud-spreed-signaling:1.3.2 AS signaling
-FROM alpine:3.20.1 AS janus
+FROM alpine:3.20.2 AS janus
 
 ARG JANUS_VERSION=v0.14.3
 WORKDIR /src
@@ -34,7 +34,7 @@ RUN set -ex; \
     make configs; \
     rename -v ".jcfg.sample" ".jcfg" /usr/local/etc/janus/*.jcfg.sample
 
-FROM alpine:3.20.1
+FROM alpine:3.20.2
 ENV ETURNAL_ETC_DIR="/conf"
 COPY --from=janus     --chmod=777 --chown=1000:1000 /usr/local                          /usr/local
 COPY --from=eturnal   --chmod=777 --chown=1000:1000 /opt/eturnal                        /opt/eturnal

Containers/watchtower/Dockerfile

@@ -2,7 +2,7 @@
 # From https://github.com/containrrr/watchtower/blob/main/dockerfiles/Dockerfile.self-contained
 FROM containrrr/watchtower:1.7.1 AS watchtower
 
-FROM alpine:3.20.1
+FROM alpine:3.20.2
 
 RUN apk upgrade --no-cache -a; \
     apk add --no-cache bash

docker-rootless.md

@@ -9,11 +9,29 @@ You can run AIO with docker rootless by following the steps below.
 1. If you need ipv6 support, you should enable it by following https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md.
 1. Do not forget to set the mentioned environmental variables `PATH` and `DOCKER_HOST` and in best case add them to your `~/.bashrc` file as shown!
 1. Also do not forget to run `loginctl enable-linger USERNAME` (and substitute USERNAME with the correct one) in order to make sure that user services are automatically started after every reboot.
-1. Expose the privileged ports by following https://docs.docker.com/engine/security/rootless/#exposing-privileged-ports. (`sudo setcap cap_net_bind_service=ep $(which rootlesskit); systemctl --user restart docker`)
+1. Expose the privileged ports by following https://docs.docker.com/engine/security/rootless/#exposing-privileged-ports. (`sudo setcap cap_net_bind_service=ep $(which rootlesskit); systemctl --user restart docker`). If you require the correct source IP you must expose them via `/etc/sysctl.conf`, [see note below](#note-regarding-docker-network-driver).
 1. Use the official AIO startup command but use `--volume $XDG_RUNTIME_DIR/docker.sock:/var/run/docker.sock:ro` instead of `--volume /var/run/docker.sock:/var/run/docker.sock:ro` and also add `--env WATCHTOWER_DOCKER_SOCKET_PATH=$XDG_RUNTIME_DIR/docker.sock` to the initial container startup (which is needed for mastercontainer updates to work correctly). When you are using Portainer to deploy AIO, the variable `$XDG_RUNTIME_DIR` is not available. In this case, it is necessary to manually add the path (e.g. `/run/user/1000/docker.sock`) to the Docker compose file to replace the `$XDG_RUNTIME_DIR` variable. If you are not sure how to get the path, you can run on the host: `echo $XDG_RUNTIME_DIR`.
-
 1. Now everything should work like without docker rootless. You can consider using docker-compose for this or running it behind a reverse proxy. Basically the only thing that needs to be adjusted always in the startup command or compose.yaml file (after installing docker rootles) are things that are mentioned in point 3.
+1. ⚠️ **Important:** Please read through all notes below!
+
+### Note regarding sudo in the documentation
+Almost all commands in this project's documentation use `sudo docker ...`. Since `sudo` is not needed in case of docker rootless, you simply remove `sudo` from the commands and they should work. 
 
-**Please note:** All files outside the containers get created, written to and accessed as the user that is running the docker daemon or a subuid of it. So for the built-in backup to work you need to allow this user to write to the target directory. E.g. with `sudo chown -R USERNAME:GROUPNAME /mnt/backup`. The same applies when changing Nextcloud's datadir. E.g. `sudo chown -R USERNAME:GROUPNAME /mnt/ncdata`. When you want to use the NEXTCLOUD_MOUNT option for local external storage, you need to adjust the permissions of the chosen folders to be accessible/writeable by the userid `100032:100032` (if running `grep ^$(whoami): /etc/subuid` as the user that is running the docker daemon returns 100000 as first value). 
+### Note regarding permissions
+All files outside the containers get created, written to and accessed as the user that is running the docker daemon or a subuid of it. So for the built-in backup to work you need to allow this user to write to the target directory. E.g. with `sudo chown -R USERNAME:GROUPNAME /mnt/backup`. The same applies when changing Nextcloud's datadir. E.g. `sudo chown -R USERNAME:GROUPNAME /mnt/ncdata`. When you want to use the NEXTCLOUD_MOUNT option for local external storage, you need to adjust the permissions of the chosen folders to be accessible/writeable by the userid `100032:100032` (if running `grep ^$(whoami): /etc/subuid` as the user that is running the docker daemon returns 100000 as first value). 
 
-⚠️ **Additional note:** Almost all commands in this project's documentation use `sudo docker ...`. Since `sudo` is not needed in case of docker rootless, you simply remove `sudo` from the commands and they should work. 
+### Note regarding docker network driver
+By default rootless docker uses the `slirp4netns` IP driver and the `builtin` port driver. As mentioned in [the documentation](https://docs.docker.com/engine/security/rootless/#networking-errors), this combination doesn't provide "Source IP propagation". This means that Apache and Nextcloud will see all connections as coming from the docker gateway (e.g 172.19.0.1), which can lead to the Nextcloud brute force protection blocking all connection attempts. To expose the correct source IP, you will need to configure docker to also use `slirp4netns` as the port driver (see also [this guide](https://rootlesscontaine.rs/getting-started/docker/#changing-the-port-forwarder)).
+As stated in the documentation, this change will likely lead to decreased network throughput. You should test this by trying to transfer a large file after completing your setup and revert back to the `builtin` port driver if the throughput is too slow.
+* Add `net.ipv4.ip_unprivileged_port_start=80` to `/etc/sysctl.conf`. Editing this file requires root privileges. (using capabilities doesn't work here; see [this issue](https://github.com/rootless-containers/slirp4netns/issues/251#issuecomment-761415404)).
+* Run `sudo sysctl --system` to propagate the change.
+* Create `~/.config/systemd/user/docker.service.d/override.conf`
+  with the following content:
+  ```
+  [Service]
+  Environment="DOCKERD_ROOTLESS_ROOTLESSKIT_PORT_DRIVER=slirp4netns"
+  ```
+* Restart the docker daemon
+  ```
+  systemctl --user restart docker
+  ```

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 9.2.0
+version: 9.3.0
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/readme.md

@@ -25,7 +25,7 @@ Then run:
 
 ```
 helm repo add nextcloud-aio https://nextcloud.github.io/all-in-one/
-helm install my-release nextcloud-aio/nextcloud-aio-helm-chart -f values.yaml
+helm install nextcloud-aio nextcloud-aio/nextcloud-aio-helm-chart -f values.yaml
 ```
 
 And after a while, everything should be set up.

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -66,7 +66,7 @@ spec:
               value: nextcloud-aio-talk
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-apache:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-apache:20240725_074330"
           name: nextcloud-aio-apache
           ports:
             - containerPort: {{ .Values.APACHE_PORT }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -61,7 +61,7 @@ spec:
               value: "{{ .Values.NEXTCLOUD_UPLOAD_LIMIT }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-clamav:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-clamav:20240725_074330"
           name: nextcloud-aio-clamav
           ports:
             - containerPort: 3310

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -36,7 +36,7 @@ spec:
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true {{ .Values.COLLABORA_SECCOMP_POLICY }} --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-collabora:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-collabora:20240725_074330"
           name: nextcloud-aio-collabora
           ports:
             - containerPort: 9980

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -70,7 +70,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-postgresql:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-postgresql:20240725_074330"
           name: nextcloud-aio-database
           ports:
             - containerPort: 5432

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -60,7 +60,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-fulltextsearch:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-fulltextsearch:20240725_074330"
           name: nextcloud-aio-fulltextsearch
           ports:
             - containerPort: 9200

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -28,7 +28,7 @@ spec:
               value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-imaginary:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-imaginary:20240725_074330"
           name: nextcloud-aio-imaginary
           ports:
             - containerPort: 9000

nextcloud-aio-helm-chart/templates/nextcloud-aio-networkpolicy.yaml

@@ -0,0 +1,20 @@
+{{- if eq .Values.NETWORK_POLICY_ENABLED "yes" }}
+# https://github.com/ahmetb/kubernetes-network-policy-recipes/blob/master/04-deny-traffic-from-other-namespaces.md
+kind: NetworkPolicy
+apiVersion: networking.k8s.io/v1
+metadata:
+  namespace: "{{ .Values.NAMESPACE }}"
+  name: nextcloud-aio-deny-from-other-namespaces
+spec:
+  podSelector:
+    matchLabels:
+  policyTypes:
+    - Ingress
+    - Egress
+  ingress:
+  - from:
+    - podSelector: {}
+  egress:
+  - to:
+    - podSelector: {}
+{{- end }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -175,7 +175,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: UPDATE_NEXTCLOUD_APPS
               value: "{{ .Values.UPDATE_NEXTCLOUD_APPS }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-nextcloud:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-nextcloud:20240725_074330"
           name: nextcloud-aio-nextcloud
           ports:
             - containerPort: 9000

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -57,7 +57,7 @@ spec:
               value: nextcloud-aio-redis
             - name: REDIS_HOST_PASSWORD
               value: "{{ .Values.REDIS_PASSWORD }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-notify-push:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-notify-push:20240725_074330"
           name: nextcloud-aio-notify-push
           ports:
             - containerPort: 7867

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -48,7 +48,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-onlyoffice:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-onlyoffice:20240725_074330"
           name: nextcloud-aio-onlyoffice
           ports:
             - containerPort: 80

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -43,7 +43,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-redis:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-redis:20240725_074330"
           name: nextcloud-aio-redis
           ports:
             - containerPort: 6379

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-talk:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-talk:20240725_074330"
           name: nextcloud-aio-talk
           ports:
             - containerPort: {{ .Values.TALK_PORT }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -32,7 +32,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-talk-recording:20240718_063028"
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}/aio-talk-recording:20240725_074330"
           name: nextcloud-aio-talk-recording
           ports:
             - containerPort: 1234