pimatic-johnny-five

Pimatic Plugin for Johnny Five, a Robotics and IoT programming framework.

Thanks to Johnny Five, you can easily integrate a wide range of sensors and actuators attached to

an Arduino board,
an ESP8266 board,
a Photon board, or
your Raspberry Pi. Generally, it is possible to use multiple boards at the same time which may be local boards, i.e. the host running pimatic or a board attached via USB to the pimatic host, or remote boards connected via LAN, WiFi or some proxy device on the local network.

For Arduino, the universal Firmata library is used which implements a protocol for the communication with host computer. Thus, there is no need to modify the Arduino sketch when new sensors or actuators are connected to your Arduino. Johnny Five also supports a variety of I2C and 1-Wire devices.

Support for ESP8266 is experimental at the moment as it requires the "esp" development branch of Firmata.

Status of implementation

This version supports the following devices

ContactSensor, PresenceSensor, and ButtonSensor (digital input)
Dimmer (digital output with PWM)
Switch (digital output)
Relay Switch (relay boards attached to digital output)
Temperature Sensor (analog, I2C and 1-Wire)
Temperature & Humidity Sensor (analog, I2C - sorry, no 1-Wire support, to date)
Temperature & Barometric Pressure Sensor (I2C devices such as BMP180, MPL115A2, MPL3115A2)
RGB LED (common cathode/common cathode LEDs and PCA9685, an I2C-bus controlled 16-channel LED controller)

The OLED and LCD display devices are incomplete and, thus, should not be used. They won't do anything useful anyway.

Board-support has been tested with "arduino", "raspi-io", "particle-io", "etherport" and "expander" board types. Support for "etherport-client" and "esp8266" is experimental.

Contributions

If you like this plugin, please consider ★ starring the project on github. Contributions to the project are welcome. You can simply fork the project and create a pull request with your contribution to start with.

Platform Support

The plugin currently supports Arduino, Raspberry Pi boards, and tethering. More boards can be added on request. The Johnny Five project provides a detailed list of supported platforms with detailed information on supported features and how to set up the board.

Plugin Configuration

You can load the plugin by editing your config.json to include the following in the plugins section. You need to configure the boards you wish to use to control your devices. Generally, a board is a control system as part of pimatic to drive the hardware board you use, for example,

your Raspberry Pi,
an Arduino board attached to your Raspberry Pi via USB,
an I2C Expander chip connected to to your Raspberry Pi or Arduino, or
a remote board connected via etherport.

The following configuration is an example for pimatic with an Arduino Nano connected via USB on ttyUSB1 and an Expander connected to the Arduino:

{
    "plugin": "johnny-five",
    "boards": [
    {
      "id": "1",
      "boardType": "arduino",
      "port": "/dev/ttyUSB1",
      "baudrate": 57600
    },
    {
      "id": "2",
      "boardType": "raspi-io"
    },
    {
      "id": "3",
      "boardType": "expander",
      "port": "1",
      "controller": "MCP23017"
    }
  ]
}

The plugin has the following configuration properties:

Property	Default	Type	Description
debug	false	Boolean	Provide additional debug output if true
boards	-	Array	An Array of board configuration objects

The configuration for a board is an object comprising the following properties.

Property	Default	Type	Description
id	-	String	Unique identifier used as a reference by a device configuration
boardType	"arduino"	String	The type of board, see supported types below
port	-	String	Path or name of device port
token	-	String	Particle token. Only required for particle-io board type
deviceId	-	String	Particle device id. Only required for particle-io board type
controller	-	String	Expander controller type (see below). Only required for expander board type
address	-	String	Expander I2C address for expander board type or IP address/hostname for esp8266 or etherport-client board type

Supported boardTypes

"arduino" - see Platform Support
"raspi-io" - works with all Raspberry Pi models (Zero has not been tested yet). Note, wiringPi must be installed
"particle-io" - known to work for Particle Photon and Sparkfun Photon RedBoard
"etherport" - works for Arduinos with ethernet or wifi shields, a software relay to integrate a remote Raspberry will be provided soon.
"expander" - see supported controller types below
"esp8266" and "etherport-client" - works for remote boards like ESP6266 which provide a listener socket pimatic needs to connect to

Supported Expander controller types:

"MCP23017"
"MCP23008"
"PCF8574"
"PCF8574A"
"PCF8575"
"PCA9685"
"PCF8591"
"MUXSHIELD2"
"GROVEPI"
"CD74HC4067"

The address needs only to be set if an I2C address other than the default address is used.

Controller	Address Range	Default
"MCP23017"	"0x20"-"0x27"	"0x20"
"MCP23008"	"0x20"-"0x27"	"0x20"
"PCF8574"	"0x20"-"0x27"	"0x20"
"PCF8574A"	"0x38"-"0x3F"	"0x38"
"PCF8575"	"0x20"-"0x27"	"0x20"
"PCF8591"	"0x48"-"0x4F"	"0x48"
"PCA9685"	"0x40"-"0x4F"	"0x40"
"GROVEPI"	"0x04"	"0x04"
"CD74HC4067"	"0x0A"-"0x0D"	"0x0A"

Device Configuration

Devices must be added manually to the device section of your pimatic config. For pin assignment conventions see the document on pin naming.

Switch Device

JohnnyFiveSwitch is based on the PowerSwitch device class. You need to provide the address of the output pin. The device is mapped to a JF "digital output" Pin.

{
      "id": "jf-do-1",
      "class": "JohnnyFiveSwitch",
      "name": "Digital Output (pin 13)",
      "pin": "13",
      "boardId": "1"
}

It has the following configuration properties:

Property	Default	Type	Description
pin		String	Pin address of the digital output
boardId	-	String	Id of the board to be used

The Digital Output Device exhibits the following attributes:

Property	Unit	Type	Acronym	Description
state	-	Boolean	-	Switch State, true is on, false is off

The following predicates and actions are supported:

{device} is turned on|off
switch {device} on|off
toggle {device}

PWM Output (Dimmer)

JohnnyFivePwmOutput is based on the DimmerActuator device class. You need to provide the address of the output pin. The device is mapped to a JF Led.

{
      "id": "jf-pwm-1",
      "class": "JohnnyFivePwmOutput",
      "name": "Digital PWM Output (pin 3)",
      "pin": "3",
      "boardId": "1"
}

It has the following configuration properties:

Property	Default	Type	Description
pin		String	Pin address of the (PWM capable) digital output
boardId	-	String	Id of the board to be used

The Digital Output Device exhibits the following attributes:

Property	Unit	Type	Acronym	Description
state	-	Boolean	-	Switch State, true is on, false is off
dimlevel	%	Number	-	A percentage value of the PWM duty cycle

The following predicates and actions are supported:

{device} is turned on|off
switch {device} on|off
toggle {device}
dim {device} to {value}

RGB LED

JohnnyFiveRgbLed is based on the DimmerActuator device class. You need to provide the address of the output pins for red, green, and blue. The property isAnode is used to specify whether the LED has common anode or cathode. The device is mapped to a JF Led.RGB.

{
      "id": "jf-pwm-1",
      "class": "JohnnyFiveRgbLed",
      "name": "RGB LED",
      "boardId": "2",
      "pins": {
          "red": "GPIO16",
          "green": "GPIO20",
          "blue": "GPIO21"
      },
      "isAnode": true,
}

It has the following configuration properties:

Property	Default	Type	Description
pins		Object	The pins assigned to the RGB LED, defined by an object with the following properties.
pins.red		String	The pin for red
pins.green		String	The pin for green
pins.blue		String	The pin for blue
isAnode	false	Boolean	If set to true the LED is a common anode LED. Defaults to false, indicating a common cathode LED
boardId	-	String	Id of the board to be used

The Digital Output Device exhibits the following attributes:

Property	Unit	Type	Acronym	Description
state	-	Boolean	-	Switch State, true is on, false is off
dimlevel	%	Number	-	A percentage value of the PWM duty cycle
color	-	String	RGB	A 6-digit RGB hex string starting with, or a CSS color name, or a variable reference

The following predicates and actions are supported:

{device} is turned on|off
switch {device} on|off
toggle {device}
dim {device} to {value}
j5 set color {device} to {value}

Presence Sensor

JohnnyFivePresenceSensor is a digital input device based on the PresenceSensor device class. You need to provide the address of the input pin and the boardId.

{
      "id": "jf-cs-1",
      "class": "JohnnyFiveContactSensor",
      "name": "Digital Input (pin 4)",
      "pin": "4",
      "boardId": "1"
}

It has the following configuration properties:

Property	Default	Type	Description
pin	-	String	Pin address of the digital output
boardId	-	String	Id of the board to be used
invert	false	Boolean	If true, invert the presence sensor state

The presence sensor exhibits the following attributes:

Property	Unit	Type	Acronym	Description
presence	-	Boolean	-	Presence State, true is present, false is absent

The following predicates are supported:

{device} is present|absent

Contact Sensor

JohnnyFiveContactSensor is a digital input device based on the ContactSensor device class. You need to provide the address of the input pin.

{
      "id": "jf-cs-1",
      "class": "JohnnyFiveContactSensor",
      "name": "Digital Input (pin 4)",
      "pin": "4",
      "boardId": "1"
}

It has the following configuration properties:

Property	Default	Type	Description
pin		String	Pin address of the digital output
boardId	-	String	Id of the board to be used
invert	false	Boolean	If true, invert the contact sensor state

The presence sensor exhibits the following attributes:

Property	Unit	Type	Acronym	Description
contact	-	Boolean	-	Contact State, true is opened, false is closed

The following predicates are supported:

{device} is opened|closed

Button Device

The Button Device is a digital input device based on the ContactSensor device class. You need to provide the address of the input pin.

{
      "id": "jf-b-1",
      "class": "JohnnyFiveButton",
      "name": "Button (pin 2)",
      "pin": "2",
      "boardId": "1"
}

The Button Device has the following configuration properties:

Property	Default	Type	Description
pin	-	String	Pin address of the digital output
boardId	-	String	Id of the board to be used
pullUp	false	Boolean	If true, activate the internal pull-up. As a result, a high signal will be read if push-button is open
invert	false	Boolean	If true, invert the button state
holdTime	500	Number	Time in milliseconds that the button must be held until triggering an event
controller	""	String	Controller interface type if an EVshield is used. Supports 'EVS_EV3' and 'EVS_NXT' shields

For wiring examples, see:

The following predicates are supported:

{device} is opened|closed

Relay

The Relay Device represents a single digital Relay attached to the physical board. You need to provide the address of the output pin controlling the relay.

{
    "id": "jf-r-1",
    "name": "Johnny Five Relay",
    "class": "JohnnyFiveRelay",
    "boardId": "1",
    "pin": "12",
    "type": "NO"
}

The Relay Device supports two wiring options:

"NO", Normally Open: When provided with any voltage supply, the output is on. The default mode is LOW or "off", requiring a HIGH signal to turn the relay off.
"NC", Normally Closed: When provided with any voltage supply, the output is off. The default mode is LOW or “off”, requiring a HIGH signal to turn the relay on.

For wiring examples, see:

Relay "NO" and "NC" wiring

The Relay Device has the following configuration properties:

Property	Default	Type	Description
pin	-	String	Pin address of the digital output
boardId	-	String	Id of the board to be used
type	"NO"	String	Whether the relay is wired to be normally open ("NO"), or normally closed ("NC") if pin output is LOW

Temperature Sensor

The Temperature Sensor is an input device based on the TemperatureSensor device class. It currently supports 4,7k NTC thermistors ("TINKERKIT"), various I2C sensors, and the DS18B20 1Wire sensor. Depending on type of sensor different properties are required.

{
    "id": "jf-t-1",
    "name": "Johnny Five Temperature",
    "class": "JohnnyFiveTemperature",
    "boardId": "1",
    "controller": "SI7020",
    "address": "0x40",
    "temperatureOffset": -1
},
{
    "id": "jf-t-2",
    "name": "Johnny Five Temperature 2",
    "class": "JohnnyFiveTemperature",
    "boardId": "1",
    "pin": "A0",
    "controller": "TINKERKIT",
    "offset": -2.75,
    "units": "metric"
}

The Temperature Sensor has the following configuration properties:

Property	Default	Type	Description
controller	"TINKERKIT"	String	Controller interface type to be used, one of TINKERKIT, LM35, TMP36, DS18B20, MPU6050, GROVE, BMP180, MPL115A2, MPL3115A2, HTU21D, SI7020
pin	""	String	The pin address. Required if controller is TINKERKIT, optional otherwise
address	""	String	If controller is an I2C device and address is not provided the device-specfic default address applies
boardId	-	String	Id of the board to be used
interval	10	Number	The time interval in seconds at which the sensor will be read
units	"metric"	String	Defines whether metric, imperial, or standard units shall be used
offset	0	Number	A positive or negative offset value to adjust a deviation of the temperature sensor
controller	""	String	Controller interface type if an EVshield is used. Supports 'EVS_EV3' and 'EVS_NXT' shields

address: description: """ The I2C address. If controller is an I2C device and address is not provided the device-specfic default address applies. """ type: "string" required: false

For wiring examples, see:

Temperature TINKERKIT
- If you don't have the tinkerkit shield, here's a wiring sketch for the thermistor.
Temperature MPU6050

Release History

See Release History.

Credits

The 'johnny-five-icon' files have been created with Inkscape using artwork by Mike Sgier published as part of the Johnny Five project.

MIT-License: https://github.com/rwaldron/johnny-five/blob/master/LICENSE-MIT

License

AGPL-3.0

Name		Name	Last commit message	Last commit date
Latest commit History 145 Commits
actions		actions
assets		assets
devices		devices
.gitignore		.gitignore
.travis.yml		.travis.yml
HISTORY.md		HISTORY.md
LICENSE		LICENSE
README.md		README.md
board-manager.coffee		board-manager.coffee
device-config-schema.coffee		device-config-schema.coffee
johnny-five-config-schema.coffee		johnny-five-config-schema.coffee
johnny-five.coffee		johnny-five.coffee
package.json		package.json

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

pimatic-johnny-five

Status of implementation

Contributions

Platform Support

Plugin Configuration

Device Configuration

Switch Device

PWM Output (Dimmer)

RGB LED

Presence Sensor

Contact Sensor

Button Device

Relay

Temperature Sensor

Release History

Credits

License

About

Releases 13

Packages

Contributors 4

Languages

License

mwittig/pimatic-johnny-five

Folders and files

Latest commit

History

Repository files navigation

pimatic-johnny-five

Status of implementation

Contributions

Platform Support

Plugin Configuration

Device Configuration

Switch Device

PWM Output (Dimmer)

RGB LED

Presence Sensor

Contact Sensor

Button Device

Relay

Temperature Sensor

Release History

Credits

License

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 13

Packages 0

Contributors 4

Languages

Packages