test: Use new incus snapshot commands

Signed-off-by: Thomas Hipp <[email protected]>

test/suites/backup.sh

@@ -103,7 +103,7 @@ EOF
     echo "hello world" | incus exec c1 --project test -- tee /mnt/test.txt
     incus exec c1 --project test -- grep -xF "hello world" /mnt/test.txt
     incus stop -f c1
-    incus snapshot c1
+    incus snapshot create c1
     incus info c1
 
     incus storage volume snapshot "${poolName}" vol1_test snap0
@@ -190,7 +190,7 @@ EOF
     incus exec c1 --project test -- grep -xF "hello world" /mnt/test.txt
 
     # Check snashot can be restored.
-    incus restore c1 snap0
+    incus snapshot restore c1 snap0
     incus info c1
     incus exec c1 --project test -- hostname
 
@@ -210,7 +210,7 @@ EOF
 
     incus info c1 | grep snap0
     incus exec c1 --project test -- hostname
-    incus restore c1 snap0
+    incus snapshot restore c1 snap0
     incus info c1
     incus exec c1 --project test -- hostname
 
@@ -265,7 +265,7 @@ EOF
 
     incus info c1 | grep snap0
     incus exec c1 --project test -- ls
-    incus restore c1 snap0
+    incus snapshot restore c1 snap0
     incus info c1
     incus exec c1 --project test -- ls
     incus delete -f c1
@@ -366,7 +366,7 @@ test_backup_import_with_project() {
 
   incus launch testimage c1
   incus launch testimage c2
-  incus snapshot c2
+  incus snapshot create c2
 
   incus_backend=$(storage_backend "$INCUS_DIR")
 
@@ -421,14 +421,14 @@ test_backup_import_with_project() {
     incus start c3 --project "$project-b"
     incus stop c2 --project "$project-b" --force
     incus stop c3 --project "$project-b" --force
-    incus restore c2 snap0 --project "$project-b"
-    incus restore c3 snap0 --project "$project-b"
+    incus snapshot restore c2 snap0 --project "$project-b"
+    incus snapshot restore c3 snap0 --project "$project-b"
     incus delete --force c2 --project "$project-b"
     incus delete --force c3 --project "$project-b"
   fi
 
-  incus restore c2 snap0
-  incus restore c3 snap0
+  incus snapshot restore c2 snap0
+  incus snapshot restore c3 snap0
   incus start c2
   incus start c3
   incus delete --force c2
@@ -444,8 +444,8 @@ test_backup_import_with_project() {
     incus start c3
     incus stop c2 --force
     incus stop c3 --force
-    incus restore c2 snap0
-    incus restore c3 snap0
+    incus snapshot restore c2 snap0
+    incus snapshot restore c3 snap0
     incus start c2
     incus start c3
     incus delete --force c2
@@ -458,9 +458,9 @@ test_backup_import_with_project() {
 
   incus launch testimage c1-foo
   incus storage volume set "${default_pool}" container/c1-foo user.foo=c1-foo-snap0
-  incus snapshot c1-foo c1-foo-snap0
+  incus snapshot create c1-foo c1-foo-snap0
   incus storage volume set "${default_pool}" container/c1-foo user.foo=c1-foo-snap1
-  incus snapshot c1-foo c1-foo-snap1
+  incus snapshot create c1-foo c1-foo-snap1
   incus storage volume set "${default_pool}" container/c1-foo user.foo=post-c1-foo-snap1
 
   incus export c1-foo "${INCUS_DIR}/c1-foo.tar.gz"
@@ -543,7 +543,7 @@ test_backup_export_with_project() {
   ensure_has_localhost_remote "${INCUS_ADDR}"
 
   incus launch testimage c1
-  incus snapshot c1
+  incus snapshot create c1
 
   mkdir "${INCUS_DIR}/optimized" "${INCUS_DIR}/non-optimized"
   incus_backend=$(storage_backend "$INCUS_DIR")
@@ -593,7 +593,7 @@ test_backup_export_with_project() {
 
   # Check if hyphens cause issues when creating backups
   incus launch testimage c1-foo
-  incus snapshot c1-foo
+  incus snapshot create c1-foo
 
   incus export c1-foo "${INCUS_DIR}/c1-foo.tar.gz"
 

test/suites/basic.sh

@@ -237,7 +237,7 @@ test_basic_usage() {
   ! incus init testimage aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa || false
 
   # Test snapshot publish
-  incus snapshot bar
+  incus snapshot create bar
   incus publish bar/snap0 --alias foo
   incus init foo bar2
   incus list | grep bar2

test/suites/clustering.sh

@@ -464,10 +464,10 @@ test_clustering_containers() {
   INCUS_DIR="${INCUS_ONE_DIR}" incus info --show-log foo | grep -q Log
 
   # Create, rename and delete a snapshot of the container via node1
-  INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot foo foo-bak
+  INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot create foo foo-bak
   INCUS_DIR="${INCUS_ONE_DIR}" incus info foo | grep -q foo-bak
   INCUS_DIR="${INCUS_ONE_DIR}" incus rename foo/foo-bak foo/foo-bak-2
-  INCUS_DIR="${INCUS_ONE_DIR}" incus delete foo/foo-bak-2
+  INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot delete foo/foo-bak-2
   ! INCUS_DIR="${INCUS_ONE_DIR}" incus info foo | grep -q foo-bak-2 || false
 
   # Export from node1 the image that was imported on node2
@@ -482,7 +482,7 @@ test_clustering_containers() {
   ! INCUS_DIR="${INCUS_TWO_DIR}" incus list | grep -q bar || false
 
   # Create a container on node1 using a snapshot from node2.
-  INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot foo foo-bak
+  INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot create foo foo-bak
   INCUS_DIR="${INCUS_TWO_DIR}" incus copy foo/foo-bak bar --target node1
   INCUS_DIR="${INCUS_TWO_DIR}" incus info bar | grep -q "Location: node1"
   INCUS_DIR="${INCUS_THREE_DIR}" incus delete bar
@@ -764,7 +764,7 @@ test_clustering_storage() {
 
     # Stop the container and create a snapshot
     INCUS_DIR="${INCUS_ONE_DIR}" incus stop foo --force
-    INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot foo snap-test
+    INCUS_DIR="${INCUS_ONE_DIR}" incus snapshot create foo snap-test
 
     # Move the container to node1
     INCUS_DIR="${INCUS_TWO_DIR}" incus move foo --target node1
@@ -1394,7 +1394,7 @@ test_clustering_publish() {
   INCUS_DIR="${INCUS_ONE_DIR}" incus image show foo-image | grep -q "public: false"
   INCUS_DIR="${INCUS_TWO_DIR}" incus image delete foo-image
 
-  INCUS_DIR="${INCUS_TWO_DIR}" incus snapshot foo backup
+  INCUS_DIR="${INCUS_TWO_DIR}" incus snapshot create foo backup
   INCUS_DIR="${INCUS_ONE_DIR}" incus publish foo/backup --alias=foo-backup-image
   INCUS_DIR="${INCUS_ONE_DIR}" incus image show foo-backup-image | grep -q "public: false"
 

test/suites/config.sh

@@ -313,7 +313,7 @@ test_property() {
   incus config show foo | grep -q "ephemeral: false"
 
   # Create a snap of the instance to set its expiration timestamp
-  incus snapshot foo s1
+  incus snapshot create foo s1
   incus config set foo/s1 expires_at="2024-03-23T17:38:37.753398689-04:00" --property
   incus config show foo/s1 | grep -q "expires_at: 2024-03-23T17:38:37.753398689-04:00"
   incus config unset foo/s1 expires_at --property
@@ -349,7 +349,7 @@ test_config_edit_container_snapshot_pool_config() {
     ensure_import_testimage
 
     incus init testimage c1 -s "$storage_pool"
-    incus snapshot c1 s1
+    incus snapshot create c1 s1
     # edit the container volume name
     incus storage volume show "$storage_pool" container/c1 | \
         sed 's/^description:.*/description: bar/' | \
@@ -404,7 +404,7 @@ test_container_snapshot_config() {
     ensure_import_testimage
 
     incus init testimage foo -s "incustest-$(basename "${INCUS_DIR}")"
-    incus snapshot foo
+    incus snapshot create foo
     incus config show foo/snap0 | grep -q 'expires_at: 0001-01-01T00:00:00Z'
 
     echo 'expires_at: 2100-01-01T00:00:00Z' | incus config edit foo/snap0

test/suites/container_devices_nic_bridged.sh

@@ -584,7 +584,7 @@ test_container_devices_nic_bridged() {
   grep -F "192.0.2.232" "${INCUS_DIR}/networks/${brName}/dnsmasq.hosts/${ctName}.eth0"
   incus copy "${ctName}" foo # Gets new MAC address but IPs still conflict.
   ! stat "${INCUS_DIR}/networks/${brName}/dnsmasq.hosts/foo.eth0" || false
-  incus snapshot foo
+  incus snapshot create foo
   incus export foo foo.tar.gz
   ! incus start foo || false
   incus config device set foo eth0 \
@@ -595,7 +595,7 @@ test_container_devices_nic_bridged() {
   incus stop -f foo
 
   # Test container snapshot with conflicting addresses can be restored.
-  incus restore foo snap0 # Test restore, IPs conflict on config device update (due to only IPs changing).
+  incus snapshot restore foo snap0 # Test restore, IPs conflict on config device update (due to only IPs changing).
   ! stat "${INCUS_DIR}/networks/${brName}/dnsmasq.hosts/foo.eth0" || false # Check lease file removed (due to non-user requested update failing).
   incus config device get foo eth0 ipv4.address | grep -Fx '192.0.2.232'
   ! incus start foo || false
@@ -606,7 +606,7 @@ test_container_devices_nic_bridged() {
   incus start foo
   incus stop -f foo
 
-  incus restore foo snap0 # Test restore, IPs conflict on config device remove/add (due to MAC change).
+  incus snapshot restore foo snap0 # Test restore, IPs conflict on config device remove/add (due to MAC change).
   ! stat "${INCUS_DIR}/networks/${brName}/dnsmasq.hosts/foo.eth0" || false # Check lease file removed (due to MAC change).
   incus config device get foo eth0 ipv4.address | grep -Fx '192.0.2.232'
   ! incus start foo || false

test/suites/container_local_cross_pool_handling.sh

@@ -86,8 +86,8 @@ test_container_local_cross_pool_handling() {
         incus delete -f c2
 
         incus init testimage c1
-        incus snapshot c1
-        incus snapshot c1
+        incus snapshot create c1
+        incus snapshot create c1
         incus copy c1 c2 -s "incustest-$(basename "${INCUS_DIR}")-${driver}1" --instance-only
         incus storage volume show "incustest-$(basename "${INCUS_DIR}")-${driver}1" container/c2
         ! incus storage volume show "incustest-$(basename "${INCUS_DIR}")-${driver}1" container/c2/snap0 || false
@@ -101,8 +101,8 @@ test_container_local_cross_pool_handling() {
         incus delete -f c2
 
         incus init testimage c1
-        incus snapshot c1
-        incus snapshot c1
+        incus snapshot create c1
+        incus snapshot create c1
         incus copy c1 c2 -s "incustest-$(basename "${INCUS_DIR}")-${driver}1"
         incus storage volume show "incustest-$(basename "${INCUS_DIR}")-${driver}1" container/c2
         incus storage volume show "incustest-$(basename "${INCUS_DIR}")-${driver}1" container/c2/snap0
@@ -124,4 +124,3 @@ test_container_local_cross_pool_handling() {
   INCUS_DIR="${INCUS_DIR}"
   kill_incus "${INCUS_STORAGE_DIR}"
 }
-

test/suites/incremental_copy.sh

@@ -64,9 +64,9 @@ do_copy() {
 
   # This will create snapshot c1/snap0
   incus storage volume set "${source_pool}" container/c1 user.foo=snap0
-  incus snapshot c1
+  incus snapshot create c1
   incus storage volume set "${source_pool}" container/c1 user.foo=snap1
-  incus snapshot c1
+  incus snapshot create c1
   incus storage volume set "${source_pool}" container/c1 user.foo=main
 
   # Remove the testfile from c1 and refresh again
@@ -88,7 +88,7 @@ do_copy() {
   incus storage volume get "${target_pool}" container/c2/snap1 user.foo | grep -Fx "snap1"
 
   # This will create snapshot c2/snap2
-  incus snapshot c2
+  incus snapshot create c2
   incus config show c2/snap2
   incus storage volume show "${target_pool}" container/c2/snap2
 

test/suites/migration.sh

@@ -178,9 +178,9 @@ migration() {
 
   incus storage volume set "${pool}" container/cccp user.foo=snap0
   echo "before" | incus file push - cccp/blah
-  incus snapshot cccp
+  incus snapshot create cccp
   incus storage volume set "${pool}" container/cccp user.foo=snap1
-  incus snapshot cccp
+  incus snapshot create cccp
   echo "after" | incus file push - cccp/blah
   incus storage volume set "${pool}" container/cccp user.foo=postsnap1
 
@@ -238,8 +238,8 @@ migration() {
 
   # Test container only copies
   incus init testimage cccp
-  incus snapshot cccp
-  incus snapshot cccp
+  incus snapshot create cccp
+  incus snapshot create cccp
 
   # Local container with snapshots move.
   incus move cccp udssr --mode=pull
@@ -251,8 +251,8 @@ migration() {
     # Test container only copies when zfs.clone_copy is set to false.
     incus storage set "incustest-$(basename "${INCUS_DIR}")" zfs.clone_copy false
     incus init testimage cccp
-    incus snapshot cccp
-    incus snapshot cccp
+    incus snapshot create cccp
+    incus snapshot create cccp
 
     # Test container only copies when zfs.clone_copy is set to false.
     incus copy cccp udssr --instance-only
@@ -558,7 +558,7 @@ migration() {
 
   # On zfs, this used to crash due to a websocket read issue.
   incus launch testimage c1
-  incus snapshot c1
+  incus snapshot create c1
   incus copy c1 l2:c1 --stateless
   incus copy c1 l2:c1 --stateless --refresh
 

test/suites/projects.sh

@@ -202,26 +202,26 @@ test_projects_snapshots() {
   incus init testimage c1
 
   # Create, rename, restore and delete a snapshot
-  incus snapshot c1
+  incus snapshot create c1
   incus info c1 | grep -q snap0
   incus config show c1/snap0 | grep -q BusyBox
   incus rename c1/snap0 c1/foo
-  incus restore c1 foo
-  incus delete c1/foo
+  incus snapshot restore c1 foo
+  incus snapshot delete c1/foo
 
   # Test copies
-  incus snapshot c1
-  incus snapshot c1
+  incus snapshot create c1
+  incus snapshot create c1
   incus copy c1 c2
   incus delete c2
 
   # Create a snapshot in this project and another one in the default project
-  incus snapshot c1
+  incus snapshot create c1
 
   incus project switch default
   ensure_import_testimage
   incus init testimage c1
-  incus snapshot c1
+  incus snapshot create c1
   incus delete c1
 
   # Switch back to the project
@@ -578,8 +578,8 @@ test_projects_limits() {
   incus project set p1 limits.memory 3GiB
 
   # Validate that snapshots don't fail with limits.
-  incus snapshot c2
-  incus restore c2 snap0
+  incus snapshot create c2
+  incus snapshot restore c2 snap0
 
   incus delete c2
 

test/suites/security.sh

@@ -149,14 +149,14 @@ test_security_protection() {
 
   # Test deletion protecton
   incus init testimage c1
-  incus snapshot c1
+  incus snapshot create c1
   incus delete c1
 
   incus profile set default security.protection.delete true
 
   incus init testimage c1
-  incus snapshot c1
-  incus delete c1/snap0
+  incus snapshot create c1
+  incus snapshot delete c1/snap0
   ! incus delete c1 || false
 
   incus config set c1 security.protection.delete false
@@ -184,7 +184,7 @@ test_security_protection() {
   incus publish c1 --alias=protected
   incus image delete protected
 
-  incus snapshot c1
+  incus snapshot create c1
   incus publish c1/snap0 --alias=protected
   incus image delete protected