iommu/amd: Fix Invalid wait context issue

With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF")
we are hitting below issue. This happens because in IOPF enablement path
it holds spin lock with irq disable and then tries to take mutex lock.

dmesg:
-----
[    0.938739] =============================
[    0.938740] [ BUG: Invalid wait context ]
[    0.938742] 6.10.0-rc1+ #1 Not tainted
[    0.938745] -----------------------------
[    0.938746] swapper/0/1 is trying to lock:
[    0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0
[    0.938767] other info that might help us debug this:
[    0.938768] context-{5:5}
[    0.938769] 7 locks held by swapper/0/1:
[    0.938772]  #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160
[    0.938790]  #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700
[    0.938799]  #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700
[    0.938806]  #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0
[    0.938813]  #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50
[    0.938822]  #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0
[    0.938867]  #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0
[    0.938872] stack backtrace:
[    0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1
[    0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019

Fix above issue by re-arranging code in attach device path:
  - move device PASID/IOPF enablement outside lock in AMD IOMMU driver.
    This is safe as core layer holds group->mutex lock before calling
    iommu_ops->attach_dev.

Reported-by: Borislav Petkov <[email protected]>
Reported-by: Mikhail Gavrilov <[email protected]>
Reported-by: Chris Bainbridge <[email protected]>
Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Borislav Petkov <[email protected]>
Tested-by: Chris Bainbridge <[email protected]>
Tested-by: Mikhail Gavrilov <[email protected]>
Signed-off-by: Vasant Hegde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>

drivers/iommu/amd/iommu.c

@@ -2032,7 +2032,6 @@ static int do_attach(struct iommu_dev_data *dev_data,
 		     struct protection_domain *domain)
 {
 	struct amd_iommu *iommu = get_amd_iommu_from_dev_data(dev_data);
-	struct pci_dev *pdev;
 	int ret = 0;
 
 	/* Update data structures */
@@ -2047,30 +2046,13 @@ static int do_attach(struct iommu_dev_data *dev_data,
 	domain->dev_iommu[iommu->index] += 1;
 	domain->dev_cnt                 += 1;
 
-	pdev = dev_is_pci(dev_data->dev) ? to_pci_dev(dev_data->dev) : NULL;
+	/* Setup GCR3 table */
 	if (pdom_is_sva_capable(domain)) {
 		ret = init_gcr3_table(dev_data, domain);
 		if (ret)
 			return ret;
-
-		if (pdev) {
-			pdev_enable_caps(pdev);
-
-			/*
-			 * Device can continue to function even if IOPF
-			 * enablement failed. Hence in error path just
-			 * disable device PRI support.
-			 */
-			if (amd_iommu_iopf_add_device(iommu, dev_data))
-				pdev_disable_cap_pri(pdev);
-		}
-	} else if (pdev) {
-		pdev_enable_cap_ats(pdev);
 	}
 
-	/* Update device table */
-	amd_iommu_dev_update_dte(dev_data, true);
-
 	return ret;
 }
 
@@ -2163,17 +2145,18 @@ static void detach_device(struct device *dev)
 
 	do_detach(dev_data);
 
+out:
+	spin_unlock(&dev_data->lock);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
+
 	/* Remove IOPF handler */
 	if (ppr)
 		amd_iommu_iopf_remove_device(iommu, dev_data);
 
 	if (dev_is_pci(dev))
 		pdev_disable_caps(to_pci_dev(dev));
 
-out:
-	spin_unlock(&dev_data->lock);
-
-	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
 static struct iommu_device *amd_iommu_probe_device(struct device *dev)
@@ -2485,6 +2468,7 @@ static int amd_iommu_attach_device(struct iommu_domain *dom,
 	struct iommu_dev_data *dev_data = dev_iommu_priv_get(dev);
 	struct protection_domain *domain = to_pdomain(dom);
 	struct amd_iommu *iommu = get_amd_iommu_from_dev(dev);
+	struct pci_dev *pdev;
 	int ret;
 
 	/*
@@ -2517,7 +2501,23 @@ static int amd_iommu_attach_device(struct iommu_domain *dom,
 	}
 #endif
 
-	iommu_completion_wait(iommu);
+	pdev = dev_is_pci(dev_data->dev) ? to_pci_dev(dev_data->dev) : NULL;
+	if (pdev && pdom_is_sva_capable(domain)) {
+		pdev_enable_caps(pdev);
+
+		/*
+		 * Device can continue to function even if IOPF
+		 * enablement failed. Hence in error path just
+		 * disable device PRI support.
+		 */
+		if (amd_iommu_iopf_add_device(iommu, dev_data))
+			pdev_disable_cap_pri(pdev);
+	} else if (pdev) {
+		pdev_enable_cap_ats(pdev);
+	}
+
+	/* Update device table */
+	amd_iommu_dev_update_dte(dev_data, true);
 
 	return ret;
 }

drivers/iommu/amd/ppr.c

@@ -248,40 +248,26 @@ void amd_iommu_page_response(struct device *dev, struct iopf_fault *evt,
 int amd_iommu_iopf_add_device(struct amd_iommu *iommu,
 			      struct iommu_dev_data *dev_data)
 {
-	unsigned long flags;
 	int ret = 0;
 
 	if (!dev_data->pri_enabled)
 		return ret;
 
-	raw_spin_lock_irqsave(&iommu->lock, flags);
-
-	if (!iommu->iopf_queue) {
-		ret = -EINVAL;
-		goto out_unlock;
-	}
+	if (!iommu->iopf_queue)
+		return -EINVAL;
 
 	ret = iopf_queue_add_device(iommu->iopf_queue, dev_data->dev);
 	if (ret)
-		goto out_unlock;
+		return ret;
 
 	dev_data->ppr = true;
-
-out_unlock:
-	raw_spin_unlock_irqrestore(&iommu->lock, flags);
-	return ret;
+	return 0;
 }
 
 /* Its assumed that caller has verified that device was added to iopf queue */
 void amd_iommu_iopf_remove_device(struct amd_iommu *iommu,
 				  struct iommu_dev_data *dev_data)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&iommu->lock, flags);
-
 	iopf_queue_remove_device(iommu->iopf_queue, dev_data->dev);
 	dev_data->ppr = false;
-
-	raw_spin_unlock_irqrestore(&iommu->lock, flags);
 }