| Filename | line # | FIXME |
|---|---|---|
| src/picsimlab1.cc | 1099 | remote control disabled |
| src/boards/board_uCboard.cc | 299 | NSTEP must be multiplied for 4 |
| src/boards/bsim_simavr.cc | 1601 | avr CONFIG size |
| src/devices/io_MCP23X17.cc | 132 | only for BANK=0; |
| src/parts/input_MPU6050.cc | 26 | remove lxrad |
| src/parts/input_encoder.cc | 173 | on slow speed output is not 90 degrees |
| src/parts/output_dcmotor.cc | 228 | on slow speed output is not 90 degrees |
| Filename | line # | TODO |
|---|---|---|
| src/picsimlab4.cc | 434 | select the better mode for channel trigguer |
| src/boards/board_Arduino_Mega.cc | 68 | cboard_Arduino_Mega: add suport to analog inputs A6 and A7 |
| src/boards/board_Arduino_Nano.cc | 69 | cboard_Arduino_Nano: add suport to analog inputs A6 and A7 |
| src/boards/board_McLab2.cc | 100 | jumper support |
| src/boards/board_PICGenios.cc | 238 | TEMP cooler must don't work with AQUE=0 |
| src/boards/board_RemoteTCP.cc | 176 | define pins |
| src/boards/bsim_gpsim.cc | 168 | add VCC and GND pins |
| src/boards/bsim_simavr.cc | 1211 | default output value is not used yet (DOV) |
| src/boards/bsim_simavr.cc | 1584 | avr ID pointer |
| src/boards/bsim_simavr.cc | 1606 | avr ID size |
| src/devices/eth_w5500.cc | 471 | add support to buffer size different of 2k |
| src/devices/lcd_ssd1306.cc | 123 | ssd1306 Scrolling Command Table |
| src/devices/lcd_ssd1306.cc | 134 | ssd1306 Continuous Vertical and Horizontal Scroll Setup |
| src/devices/lcd_ssd1306.cc | 150 | ssd1306 Set Vertical Scroll |
| src/devices/lcd_ssd1306.cc | 250 | ssd1306 Set Display Offset |
| src/devices/ldd_max72xx.cc | 72 | decode |
| src/devices/ldd_max72xx.cc | 75 | itensity |
| src/devices/ldd_max72xx.cc | 78 | scan limit |
| src/devices/ldd_max72xx.cc | 81 | shutdown |
| src/devices/ldd_max72xx.cc | 88 | display test |
| src/devices/rtc_ds1307.cc | 426 | int output |
| src/devices/rtc_pfc8563.cc | 288 | int output and countdown timer |
| src/parts/input_ds1621.cc | 211 | set addr |
| src/parts/input_ds1621.cc | 223 | implement Tout output |
| src/parts/other_IO_MCP23017.cc | 411 | only write support implemented |
| src/parts/other_IO_MCP23S17.cc | 417 | only write support implemented |
| src/parts/output_dcmotor.cc | 175 | Add transfer funcion of dc motor |