v00-14
v00-14
-
2017-08-09 Marko Petric (PR#152)
- New detector model CLIC_o3_v13
- CLIC_o3_v13: Set the cell size in HCalEndcap, HCalRing and YokeEndcap to be read from main compact file
- CLIC_o3_v13: Extend the support in the vertex of layer 4 to the edge of the sensitive
-
2017-10-10 Ete Remi (PR#172)
- Split ILD ecal segmentation selection into two values: value0 and value1 while parsing geometry for ILD_l/s5_* models.
- Changed both drivers and compact xml files.
-
2017-10-12 Frank Gaede (PR#173)
- use unbounded surfaces in the ILD TPC
- assign surfaces only to the forward half of the TPC
- as they are unbounded they will also be 'visible' in the backward half
- use unbounded surfaces in the ILD TPC
-
2017-08-25 Shaojun Lu (PR#156)
- Fix the ILD_l4/s4_v02 Hybird Hcal RPC Anode and Cathode FloatGlass place order.
- For the Hybird Hcal Endcaps and EndcapRing, they have been fixed inside compact file.
- "SHcalSc04_EndcapRing_v01.xml" for both ILD_l4_v02 and ILD_s4_v02
- "SHcalSc04_Endcaps_v01_LARGE.xml" for ILD_l4_v02
- "SHcalSc04_Endcaps_v01_SMALL.xml" for ILD_s4_v02
- For the Hybird Hcal Barrel, they have been fixed in both the driver and compact file
- "SHcalSc04_Barrel_v04.xml" for both ILD_l4_v02 and ILD_s4_v02.
- "SHcalSc04_Barrel_v04.cpp" the slices place order has been fixed to start from IP.
- For the Hybird Hcal Endcaps and EndcapRing, they have been fixed inside compact file.
- All the compact files are inside the "ILD_common_v02" folder, which are used by ILD_l5/s5_v02, too.
- So both ILD_l5_v02 and ILD_s5_v02 have the updeted Hybird Hcal, too.
- Fix the ILD_l4/s4_v02 Hybird Hcal RPC Anode and Cathode FloatGlass place order.
-
2017-07-28 TiborILD (PR#150)
- added inner box cut off for Hcal_Endcaps_SD_v01
- added SDHCAL Barrel module with TESLA geometry
-
2017-08-30 TiborILD (PR#157)
- update of ILD Hcal endcap readout segmentation
- in order to unify the readouts for all Hcal detectors the CartesianGridXZ readout of SHCalsc04_Endcaps_v01 was changed to CartesianGridXY readout
- affects models ILD_l/s4_v02 and ILD_l/s5_v02
- update of ILD Hcal endcap readout segmentation
-
2017-08-30 Jan Strube (PR#153)
- allow to change the name of the MCParticle input collection in ddsim
- using parameter 'mcParticleCollectionName'
- allow to change the name of the MCParticle input collection in ddsim
-
2017-08-30 Jan Strube (PR#153)
/ -
2017-08-02 TiborILD (PR#151)
- modifications to comply with a new xml scheme in ILD_common_v02
-
2017-09-26 Daniel Jeans (PR#167)
- adjust parameters of hybrid ECAL model: reduce scintillator 2 -> 1.5 mm, add 0.5mm air gap
- take hybrid ECAL segmentation from parameters (not hard-coded numbers)
-
2017-08-14 Andre Sailer (PR#154)
- The CommandLine information was no longer filled in the lcio runheader, it is now filled again
-
2017-09-29 Ete Remi (PR#169)
- Ecal (Hcal) segmentation selection variable moved from ecal(hcal)_defs.xml files to top level detector xml file
- Added 12 new detectors for different reconstruction combination :
- ILD_l/s4_o1_v02 : SiWEcal + AHcal (as for standard ILD_l/s4_v02)
- ILD_l/s4_o2_v02 : SiWEcal + SDHCAL
- ILD_l/s5_o1_v02 : SiWEcal + AHcal (as for standard ILD_l/s5_v02)
- ILD_l/s5_o2_v02 : SiWEcal + SDHCAL
- ILD_l/s5_o3_v02 : ScEcal + AHcal
- ILD_l/s5_o4_v02 : ScEcal + SDHCAL
- One can use simulated files from i.e ILD_l4_v02 and reconstruct them with ILD_l4_o1_v02 or ILD_l4_o2_v02 models
-
2017-09-29 Frank Gaede (PR#168)
- adapt to changes in dd4hep::BitField64 in AIDASoft/DD4hep#238
-
2017-07-27 Shaojun Lu (PR#148)
- Update ILD Documentation tools for ILD_l4/s4_v02.
- Following the DDG4 development, and update ILD Documentation tool "extractParameters.py"
- Following the ILD_l4/s4_v02 setup, and clean unused parameter in "ILD_envelope_parameters.txt" for the envelope parameters list.
- Update ILD Documentation tools for ILD_l4/s4_v02.
-
2017-08-23 Daniel Jeans (PR#155)
- In case of multi-readout setup, give the two (or more) sensitive layers within a single calorimeter layer the same layer index
-
2017-09-14 Shaojun Lu (PR#166)
- Fix ILD_l4_v02 Hybird model collections key_value.
- follow the update of the slice placement and correct the collections key_value.
- the segmentation and collection should use the same key_value for both SDHCAL and AHcal.
- Fix ILD_l4_v02 Hybird model collections key_value.
-
2017-09-06 Shaojun Lu (PR#160)
- Fix ILD SEcal05_ECRing for filling dd4hep::rec::LayeredCalorimeterData.
- For the reconstruction, we fill the LayeredCalorimeterData at runtime.
- Both side ECRings have identical layer structure, fill the one from module_num==0, and used for both.
- Fix ILD SEcal05_ECRing for filling dd4hep::rec::LayeredCalorimeterData.
-
2017-09-06 Shaojun Lu (PR#159)
- Fix ILD_l4_v02 target readout slice number for AHCAL.
- after re-order the Hybird HCAL layers, we should also update Hcal_readout_segmentation_slice_barrel to "3" as "Hcal_readout_segmentation_slice_endcap" now.
- Fix ILD_l4_v02 target readout slice number for AHCAL.
-
2017-09-12 Daniel Jeans (PR#165)
Fix the filling of dd4hep::rec::LayeredCalorimeterData::Layer data for SEcal05, SEcal06 models:- layer.distance now defined as the distance to the start of a calo layer (at the start of the absorber, except in the case of the 1st layer, in which it's the start of the ECAL).
Some additional fixes to SEcal05_ECRing: - use correct absorber thickness in stack transitions (previously not guaranteed to be correct)
- use CarbonFibre when calculating material properties for LayeredCalorimeterData (previously using air for structural material)
- cosmetic changes: indentations, commented-out code, ...
- layer.distance now defined as the distance to the start of a calo layer (at the start of the absorber, except in the case of the 1st layer, in which it's the start of the ECAL).
-
2017-09-12 Shaojun Lu (PR#164)
- For backward consistency, update all ILD AHCAL Barrel slice placement.
- update all ILD AHCAL Barrel drivers to place slice in the same consistent way.
- update the slice order in all the ILD AHCAL Barrel compact files too.
- For backward consistency, update all ILD AHCAL Barrel slice placement.
-
2017-09-12 Dan Protopopescu (PR#163)
- Option 3 of the SiD model, with Cu absorber plates in the HCal, instead of Steel235
-
2017-09-12 Shaojun Lu (PR#162)
- Fix ILD_l4_v02 Barrel MultiSegmentation slice number for different technology.
- After change the order of slice, the segmentation slice should be updated too.
- ILD_s4_v02 use the same compact file, should be fine.
- Fix ILD_l4_v02 Barrel MultiSegmentation slice number for different technology.
-
2017-10-06 Andre Sailer (PR#171)
- Drop unused and no longer existing header includes AIDASoft/DD4hep#241
-
2017-10-05 Frank Gaede (PR#170)
- fill
tpcData->zMinReadout
inTPC10_geo.cpp
- describing the cathode thickness
- fill
-
2017-09-11 Frank Gaede (PR#161)
- fix spelling of ddsim parameter:
- rename mcParticleCollectionName to MCParticleCollectionName
- fix spelling of ddsim parameter: