Skip to content

v00-13
Compare
Choose a tag to compare
@gaede gaede released this 06 Jul 09:59
v00-13
c9f5553

v00-13

  • 2017-07-06 Frank Gaede (PR#129)

    • ILD_*_v02 models: remove stereo angle in SIT ( move to pixel readout)

  • 2017-07-06 Daniel Jeans (PR#128)

    • many tweaks to ECAL dimensions in ILD_*_V02 models, referring to technical design document from H.Videau et al.
    • a couple of small bug fixes to ECAL drivers (previously ignored request for extra CF thickness in front face, if no preshower was set)
    • adjusted TPC dimensions and barrel-endcap gap to accommodate new ECAL

  • 2017-07-05 Shaojun Lu (PR#127)

    • Implement ILD HcalEndcap FrontEnd readout electronics.
    • Implement it into both ILD_common_v01 and ILD_common_v02.
    • ILD models l4/s4 will use the same services as l1/s1.

  • 2017-07-05 Shaojun Lu (PR#126)

    • Update for ILD services cables
      • Implement VXD cable cone services.
      • Implement the VXD cable services into ILD_common_v01 and ILD_common_v02.
      • Comment out the services in ILD_o1_v05.
      • Remove the ILD services reference code (not necessary).
      • The SServices00 has been updated, and used by ILD.
      • Update the ILD VXD cable configuration by expert.

  • 2017-07-05 Daniel Jeans (PR#125)

    • previously several ECAL sub-layers were combined into an averaged material to simplify simulation.
      This requires to redefine this material every time thicknesses change (quite often at the moment), which was not done consistently.
      For the time being, separate the components to ensure correct material description.
      (Consider recombining when sub-layer thicknesses are fixed and stable.)

  • 2017-07-04 Daniel Jeans (PR#124)

    • now use DD4hep_Beampipe_o1_v01 driver (gets rid of "deprecated" warning when using Beampipe_o1_v01)

  • 2017-07-04 Shaojun Lu (PR#123)

    • Update ILD_o1_v05 compact files for the services.
      • Change the FTD envelope shape to place SIT cable.
      • Add missing service parameters.

  • 2017-07-04 Daniel Jeans (PR#122)

    • updates to TPC in ILD_*_v02 models from Dimitra Tsionou
    • increased material in outer field cage
    • increased material in cathode plane
    • reduced thickness of outer field cage by 5mm (to accommodate thicker ECAL: final numbers to be confirmed)

  • 2017-07-03 Daniel Jeans (PR#121)

    • in ILD models, material of TPC cooling pipes is accounted for in TPC driver. They were also added in sservices00 driver, causing double counting. Solution: turn them off in SServices00.
Assets 2
Loading