Skip to content

julianjc84/VORON_2.4_TOP_MOUNT_XRAIL

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

34 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Many thanks to the VzBot and the Voron team for making excellent printers.

VORON-2.4-TOP-MOUNT-X-RAIL

VORON-2.4-TOP-MOUNT-X-RAIL

  • 2023-06-19 - updated to acomodate VZ lasercut tool head after plastic melted.
  • 2023-04-21 - Updated to work with Offical VZ-PrintablePrintHead - https://github.com/VzBoT3D/Vz-Printhead-Printed
  • 2023-02-01 - v4 uploaded and running. (LEGACY)

Features

  • Top Mount X Rail
  • Simple install just new xy parts and stock standard VZ_Printable tool head.
  • No major belt changes just the XY idler belts are now routed to rear of x axis beam. No cuttin no trimming of belts required.
  • Ultra lightweigth design with high accelerations. See Input Shaper graphs below.
  • 682gram Total X-Rail Full System Install.
  • Bed Printable area ~336x ~(y is actually greater to access end stop and brush) 324y

Requirements

Inspired By

BOM Build List Of Materials

New Material Requirements.

  • 20x20 Carbon Fibre Rod at ~463 mm length
  • x4 M5 x 50mm Bolts (preferably Smooth Shaft) (M5x40mm pins work however you can control the idler pressure with bolts)
  • x4 M5 x 8mm HeatSet Nuts
  • x4 M4 x 18mm cap head bolts (bottom of xy idlers)
  • x4 M4 x 12mm cap head bolts or dome (top of xy idlers)
  • x4 M5 1mm Shim Washers Re Use of Existing Hardware
  • use existing x8 M3 Bolts to mount to y linear rails.
  • use existing M5 Washers, Idlers, GT20 Pullys.

Official VZPrintHead Support (MIRRORED),

2023-04-21 VZ PrintablePrintHead Supported. Requirements to use the VZ-PrintablePrintHead mirror the Belt componetns on the X-axis. Mirrored parts are:

  • bottom plate round standoff
  • front round standoff
  • back plate round standoff

Reference Spec Images before a Mirror.

The idlers now match the VZ PrintablePrintHead

InputShaper from V3

2023-06-19 current state

YouTube

  • Watch the videos for my build journey

youtube journey

youtube preview

zChain Hidden

  • Z-Chain under the gantry extrusion is crushed especially with short hotends. Custom length hotend extension can be required. I also designed a new bed frame extrusion mount to allow the zChain to squeeze between. See STL downloads.

Feedback

  • if you install this please send me a photo on discord!
  • [email protected]
  • Discord julianjc84#7938

CAD

https://cad.onshape.com/documents/a9a183adf9bba502a9a97bd8/w/d7fe18026210d20805620ae9/e/9a3a7e08fe09ca9430e55a9d

RELATED MODS

https://github.com/YoDan-V2-2027/Voron_Vz_Printhead_Mod

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published