Designs and code related to the Motorola 68000 microprocessor.
- Order the board
- Order the parts from the bill of materials (BOM)
- Order the two FT232 USB -> serial breakout boards
- Order the chip sockets:
| Layout | Qty | Width (inches) | Notes |
|---|---|---|---|
| DIP-8 | 1 | 0.3 | For the 555 |
| DIP-14 | 17 | 0.3 | For a lot |
| DIP-16 | 8 | 0.3 | For even more |
| DIP-24 | 2 | 0.6 | Double width: for serial interface |
| DIP-28 | 8 | 0.6 | Double width: for RAM & ROM |
| DIP-64 | 1 | 0.9 | Triple width: for CPU. |
The DIP-64 can be a little hard to obtain, you could cut DIP-40 sockets to same effect. However, it's inadvisable to directly solder the CPU directly to the board. If the heat damages the chip, there's 64 pins to de-solder.
- Solder in the sockets. Applying some soldering flux can be of great help: the IC soldering pads are tiny, mainly to save space on the board.
- Solder in the rest of the components
- Flash the ROM chips
- Fit all ICs into their sockets
- Connect power (preferably through a lab bench power supply)
- Connect a PC to the board through USB
- Watch it boot
- Have some retro-computing fun!
Copyright (c) 2016-2023 by Jeff Tranter [email protected]
The hardware design is Open Source Hardware, licensed under the The TAPR Open Hardware License. You are welcome to build the circuit and use my PCB layout. See https://web.tapr.org/OHL/TAPR_Open_Hardware_License_v1.0.txt
Some code here is entirely written by me and others are ports of existing software. Software written by me is released under the following license:
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Documentation written by me is licensed under a Creative Commons Attribution 4.0 International License. See https://creativecommons.org/licenses/by/4.0/