Update README to include MLC Clone

README.md

@@ -1,6 +1,7 @@
 ![screenshot](screenshot.png)
 
 # Wii U Recovery Menu
+
 A simple recovery menu running on the IOSU for unbricking, which can be booted using [udpih](https://github.com/GaryOderNichts/udpih). 
 
 > :information_source: Some Wii U's don't show any TV output, if it hasn't been configured properly before.  
@@ -14,36 +15,47 @@ A simple recovery menu running on the IOSU for unbricking, which can be booted u
 > **purple**: menu is ready and running  
 
 ## Options
+
 ### Set Coldboot Title
+
 Allows changing the current title the console boots to.  
 Useful for unbricking CBHC bricks.  
 Possible options are:  
+
 - `Wii U Menu (JPN) - 00050010-10040000`
 - `Wii U Menu (USA) - 00050010-10040100`
 - `Wii U Menu (EUR) - 00050010-10040200`
 
 On non-retail systems the following additional options are available:
+
 - `System Config Tool - 00050010-1F700500`
 - `DEVMENU (pre-2.09) - 00050010-1F7001FF`
 - `Kiosk Menu         - 00050010-1FA81000`
 
 ### Dump Syslogs
+
 Copies all system logs to a `logs` folder on the root of the SD Card.
 
 ### Dump OTP + SEEPROM
+
 Dumps the OTP and SEEPROM to `otp.bin` and `seeprom.bin` on the root of the SD Card.
 
 ### Start wupserver
+
 Starts wupserver which allows connecting to the console from a PC using [wupclient](https://gist.github.com/GaryOderNichts/409672b1bd5627b9dc506fe0f812ec9e).
 
 ### Load Network Configuration
+
 Loads a network configuration from the SD, and temporarily applies it to use wupserver.  
 The configurations will be loaded from a `network.cfg` file on the root of your SD.  
 For using the ethernet adapter, the file should look like this:
+
 ```
 type=eth
 ```
+
 For using wifi:
+
 ```
 type=wifi
 ssid=ssidhere
@@ -52,33 +64,48 @@ key_type=WPA2_PSK_AES
 ```
 
 ### Pair Gamepad
+
 Displays the Gamepad Pin and allows pairing a Gamepad to the system. Also bypasses any region checks while pairing.  
 The numeric values represent the following symbols: `♠ = 0, ♥ = 1, ♦ = 2, ♣ = 3`.  
 Note that rebooting the system might be required to use the newly paired gamepad.
 
 ### Install WUP
+
 Installs a valid signed WUP from the `install` folder on the root of your SD Card.  
 Don't place the WUP into any subfolders.
 
 ### Edit Parental Controls
+
 Displays the current Parental Controls pin configuration.  
 Allows disabling Parental Controls.
 
 ### Debug System Region
+
 Fixes bricks caused by setting productArea and/or gameRegion to an invalid
 value. Symptoms include being unable to launch System Settings or other
 in-region titles.
 
 ### System Information
+
 Displays info about several parts of the system.  
 Including serial number, manufacturing date, console type, regions, memory devices...
 
 ### Submit System Data
+
 Allows submitting system information to an online database to collect various statistics about Wii U consoles.  
 This is entirely optional and personally identifying information will be kept confidential.  
 [The database can be found here!](https://wiiu.gerbilsoft.com/)
 
+### Clone MLC
+
+Clones the MLC to the SD card and overwrites the SD card in the process.  
+After selecting the Option the SD card will be unmounted and you can replace it with another SD card. You have to confirm then again to start the clone process.  
+During the clone process the LED will change color between yellow and blue. After the clone is finished the LED will turn purple. If the clone failed it will blink red.  
+After the clone is done, you should take an Image of the SD card and check it with wfs-extract.  
+**IMPORTANT:** If you plan to use the clone to replace the eMMC, you should not turn on the console again after the clone until use replaced the eMMC with the clone. If the console was turned on in between the SLC cache will missmatch and and the file system will corrupt irrecoverable. After you booted the console once of the the clone, you can not go back to the original eMMC, or the SLC cache would also missmatch.
+
 ## Building
+
 ```bash
 # build the docker container
 docker build -t recoverybuilder .
@@ -91,6 +118,7 @@ docker run -it --rm -v ${PWD}:/project recoverybuilder make DC_INIT=1
 ```
 
 ## Credits
+
 - [@Maschell](https://github.com/Maschell) for the [network configuration types](https://github.com/devkitPro/wut/commit/159f578b34401cd4365efd7b54b536154c9dc576)
 - [@dimok789](https://github.com/dimok789) for [mocha](https://github.com/dimok789/mocha)
 - [@hexkyz](https://github.com/hexkyz) for [hexFW](https://github.com/hexkyz/hexFW)