This repo is about the installation of Proxmox 7.X on Hetzner with pfsense as firewall for WAN, IP floating with additional IP address for the VM's to allow SNAT.
ssh [email protected]
#run
installimage
Chose the right image:
Change install config
From:
SWRAIDLEVEL 1
To:
SWRAIDLEVEL 0 (to use all Storage sda+sdb)
From:
HOSTNAME Proxmox-Ve.localhost
To:
proxmox-single.lab.local (you can call it what ever you want)
From:
PART /boot ext3 512M
PART lvm vg0 all
LV vg0 root / ext3 15G
LV vg0 swap swap swap 6G
To:
PART /boot ext**4** 512M
PART lvm vg0 all
LV vg0 root / ext4 100G
LV vg0 swap swap swap 24G #(available RAM * 1/2)
LV vg0 data /var/lib/vz ext4 3500G #(Remaining memory after deduction of root for storing images and containers)
The installation takes up to 15 minutes.
After installation a password must be assigned to the root user if access to the Hetzner machine is via ssh-key. The access will be done via the Linux PAM authentication module.
passwd
New password: xy...
Retype new password:xy...
Proxmox opens port 111 by default, which is a security risk. Therefore, the port must be disabled.
iptables -A INPUT -p tcp -m tcp --dport 111 -j DROP
iptables -A INPUT -p udp -m udp --dport 111 -j DROP
sudo /sbin/iptables-save
##if the service is not needed, then disable and mask it
sudo systemctl disable --now rpcbind rpcbind.socket
sudo systemctl mask rpcbind
Now open the Proxmox-Webconsole with your ordered server IP-Address (MAIN-IP) and login with root and your password:
To enable routing to external networks (SNAT), you'll need to request an extra IP address, since the primary IP of the Hetzner VM doesn't support this function.
You'll need to request a MAC address for the IP address. This MAC address will be later essential for the pfsense VM that handles routing to the WAN.
Note: they are a newer version of the network configuration script in the folder script called network_config_updated.sh which has Multiple IP Address Support, User Confirmation Process, Dynamic Bridge Interface Creation and Improved User Interaction. You can see the whole change under the pull request
Clone this git repository and execute the script:
./script/nework_config.sh
All necessary information (main server ip, gateway, etc.) can be taken from the hetzner robot page like this:
MAIN-IP + Meta:
ADD-IP + Meta + MAC:
Now start the pfsense (VM) and install with default settings
The steps are identical to pfsense except for the choice of bridge. There vmbr1 (DMZ/LAN) must be selected.
Default credentials are set to username: admin with password: pfsense.
If you're eager to contribute to this script, feel free to fork the repository and submit a pull request. Your input is valued and always welcome!
Current Contributors:
@L-U-C-K-Y @V-JobDone @la-cc