Fix spelling errors reported by lintian

doc/AC-RFC.tex

@@ -9,8 +9,8 @@ \section{Introduction}
 X.509 Attribute Certificates (ACs) \cite{rfc3281} are used to bind a
 set of attributes, like group membership, role, security clearance,
 etc\ldots\ with an AC holder.  Their well-defined, standardized format
-and easy extensibility make them a premium way to distribute those
-informations in large system, and in particular in environments where
+and easy extensibility make them a premium way to distribute that
+information in large system, and in particular in environments where
 authentication is done via X.509 Certificates \cite{rfc3280}.  This is
 the reason why ACs are the format chosen by the VOMS server
 \cite{voms} to encode authorization data.
@@ -52,7 +52,7 @@ \section{FQAN}
 \end{enumerate}
 
 For these reasons, a new format has been devised, as documented in
-\cite{fqan}.  However, here follows a copy of the relevant informations.
+\cite{fqan}.  However, here follows a copy of the relevant information.
 
 Group membership, Role holding and Capabilities may be expressed in a
 format that bounds them together in the following way:
@@ -175,7 +175,7 @@ \subsection{V2Form}
 particular means that this subject MUST NOT be empty.
 
 \section{Attributes}
-The attributes field contains informations about the AC holder.  At
+The attributes field contains information about the AC holder.  At
 least one attribute MUST always be present. 
 
 Attributes types use the format defined in \cite{rfc3281}, repeated here
@@ -194,7 +194,7 @@ \section{Attributes}
 
 The attributes Group and Role, defined in \cite{rfc3281} are not used by
 VOMS AC, and SHOULD NOT be present in conforming ACs.  Instead, it
-defines a new attribute, FQAN, which holds informations about both,
+defines a new attribute, FQAN, which holds information about both,
 and in fact also binds them together.
 
 \begin{verbatim}

doc/c++api.tex

@@ -29,7 +29,7 @@ \chapter{Introduction}
 \begin{compatibility}
 Some information
 \end{compatibility}
-These section contain informations regarding both back and forward
+These sections contain information regarding both back and forward
 compatibility between different versions of the API.
 
 \begin{compatibility}
@@ -92,7 +92,7 @@ \subsection{cap}
 
 \section{The voms structure}
 The second one, \texttt{voms} is used to group together all the
-informations that can be gleaned from a single AC, and is defined as
+information that can be gleaned from a single AC, and is defined as
 follows:
 
 \begin{lstlisting}{}
@@ -195,7 +195,7 @@ \subsection{uri}
 
 \subsection{date1, date2}
 These are the dates of start and end of validity of the rest of the
-informations.  They are in a string representation readable to humans,
+information.  They are in a string representation readable to humans,
 but they may be easily converted back to their original format, with a
 little twist: dates coming from an AC are in GeneralizedTime format,
 while dates coming from the old version data are in UtcTime format.
@@ -266,7 +266,7 @@ \subsection{fqan}
 
 \section{vomsdata}
 The purpose of this object is to collect in a single place all
-informations present in a VOMS extension. It is defined so.
+information present in a VOMS extension. It is defined so.
 
 \begin{lstlisting}{}
 struct vomsdata {
@@ -375,7 +375,7 @@ \subsection{error}
 \subsection{data}
 This field contains a vector of \texttt{voms} structures, in the exact
 same order as the corresponding ACs appeared in the proxy certificate,
-and containing the informations present in that AC.
+and containing the information present in that AC.
 
 \section{Methods}
 \subsection {voms}
@@ -624,7 +624,7 @@ \subsection{bool vomsdata::Retrieve(X509 *cert, STACK\_OF(X509) *chain, recurse\
 certificate, executes the verifications requested by the
 SetVerificationType() function and interprets the data.
 \parameter{cert}{This is the X509 proxy certificate from which we want to
-retrieve the informations.}
+retrieve the information.}
 \parameter{chain}{This is the certificate chain associated to the proxy
 certificate.  This parameter is only significant if the value of the
 next parameter is \texttt{RECURSE\_CHAIN}.}

doc/capi.tex

@@ -32,7 +32,7 @@ \chapter{Introduction}
 \begin{compatibility}
 Some information
 \end{compatibility}
-These section contain informations regarding both back and forward
+These sections contain information regarding both back and forward
 compatibility between different versions of the API.
 
 \begin{compatibility}
@@ -95,7 +95,7 @@ \subsection{cap}
 
 \section{The voms structure}
 The second one, \verb|voms| is used to group together all the
-informations that can be gleaned from a single AC, and is defined as
+information that can be gleaned from a single AC, and is defined as
 follows:
 
 {\begin{lstlisting}{}
@@ -185,7 +185,7 @@ \subsection{uri}
 
 \subsection{date1, date2}
 These are the dates of start and end of validity of the rest of the
-informations.  They are in a string representation readable to humans,
+information.  They are in a string representation readable to humans,
 but they may be easily converted back to their original format, with a
 little twist: dates coming from an AC are in GeneralizedTime format,
 while dates coming from the old version data are in UtcTime format.
@@ -261,7 +261,7 @@ \subsection{fqan}
 
 \section{vomsdata}
 The purpose of this object is to collect in a single place all
-informations present in a VOMS extension.  All the fields should be
+information present in a VOMS extension.  All the fields should be
 considered read-only.  Changing them has indefinite results.
 
 {\begin{lstlisting}{}
@@ -282,7 +282,7 @@ \section{vomsdata}
 \subsection{data}
 This field contains a vector of \verb|voms| structures, in the exact
 same order as the corresponding ACs appeared in the proxy certificate,
-and containing the informations present in that AC.
+and containing the information present in that AC.
 
 \subsection{workvo, volen}
 \begin{compatibility}
@@ -694,7 +694,7 @@ \subsection{int VOMS\_Contact(char *hostname, int port, char
   *servsubject, char *command, struct vomsdata *vd, int *error)}
 
 This function is used to contact a VOMS server to receive an AC
-containing the calling user's authorization informations.  A
+containing the calling user's authorization information.  A
 prerequisite to calling this function is the existance of a valid
 proxy for the user himself.  This function does not create such a
 proxy, which then must already exist.  Also, the parameters needed to

doc/software.tex

@@ -393,7 +393,7 @@ \section{Invocation}
 		      order in which these options are specified in the
 		      command line.\\
 \textbf{--version}  & Prints version information and exits.\\
-\textbf{--quiet}    & Prints only minimal informations.
+\textbf{--quiet}    & Prints only minimal information.
 		      \emph{WARNING}: some vital warnings may get
 		      overlooked by this option.\\
 \textbf{--verify}   & Verifies the certificate from which to create the
@@ -518,11 +518,11 @@ \section{Invocation}
 		      should be specified in the format
 		      ``option=value''.\\ 
 \textbf{--debug}    & This option prints a series of additional debug
-		      informations on stdout.  The additional output
+		      information on stdout.  The additional output
 		      returned by this option should \emph{always} be
 		      included into bug reports for the
 		      voms-proxy-init command.  User should not,
-		      however, ever rely on informations printed by
+		      however, ever rely on information printed by
 		      this options.  Both content and format are
 		      guaranteed to change between software
 		      releases.\\
@@ -532,7 +532,7 @@ \section{Invocation}
 
 \chapter{voms-proxy-info}
 \section{Introduction}
-This command is used to print to the screen the informations included
+This command is used to print to the screen the information included
 in an already generated VOMS proxy.
 
 \section{Configuration}
@@ -541,11 +541,11 @@ \section{Configuration}
 \section{Invocation}
 \begin{longtable}{lp{3in}}
 \textbf{--debug}    & This option prints a series of additional debug
-		      informations on stdout.  The additional output
+		      information on stdout.  The additional output
 		      returned by this option should \emph{always} be
 		      included into bug reports for the
 		      voms-proxy-info command.  User should not,
-		      however, ever rely on informations printed by
+		      however, ever rely on information printed by
 		      this options.  Both content and format are
 		      guaranteed to change between software
 		      releases.\\
@@ -571,7 +571,7 @@ \section{Invocation}
 \textbf{--info}     & Lets ``--subject'', ``--issuer'', ``--valid''
 		      and ``--time'' also apply to ACs, and prints
 		      attributes values.\\
-\textbf{--extra}    & Prints extra informations that were included in
+\textbf{--extra}    & Prints extra information that were included in
 		      the proxy.\\
 \textbf{--all}      & Prints everything. (Implies all other
 		      options.)\\
@@ -601,11 +601,11 @@ \section{Invocation}
 
 \begin{longtable}{lp{3in}}
 \textbf{--debug}    & This option prints a series of additional debug
-		      informations on stdout.  The additional output
+		      information on stdout.  The additional output
 		      returned by this option should \emph{always} be
 		      included into bug reports for the
 		      voms-proxy-info command.  User should not,
-		      however, ever rely on informations printed by
+		      however, ever rely on information printed by
 		      this options.  Both content and format are
 		      guaranteed to change between software
 		      releases.\\
@@ -615,7 +615,7 @@ \section{Invocation}
 		      option per line, and option that do have values
 		      should be specified in the format
 		      ``option=value''.\\ 
-\textbf{--quiet}    & Prints only minimal informations.
+\textbf{--quiet}    & Prints only minimal information.
 		      \emph{WARNING}: some vital warnings may get
 		      overlooked by this option.\\
 \textbf{--file}     & This option lets you specify a non-standard

doc/voms-proxy-fake.1

@@ -221,7 +221,7 @@ The created certificate will be a self\-signed certificate and have a CA=true bi
 \fB\-extension\fR
 \fIoid[/criticality]value\fR
 .PP
-This option allows to specified additional extensions to be put in the created certificate\&.
+This option allows one to specify additional extensions to be put in the created certificate\&.
 .PP
 \fIoid\fR
 is the Object Identifier of the extensions\&. Any OID may be used even if it is not already known in advance\&. This must always be specified\&. There is no default\&.
@@ -239,7 +239,7 @@ is the value of the extensions\&. It is composed by two subfields,
 and
 \fIcontent\fR\&.
 \fItype\fR
-is a single charater, and specifies how the
+is a single character, and specifies how the
 \fIcontent\fR
 is interpreted\&. \*(Aq:\*(Aq means that
 \fIcontent\fR
@@ -252,7 +252,7 @@ is the name of a file which will contain the actual data\&.
 \fB\-acextension\fR
 \fIoid[/criticality]value\fR
 .PP
-This option allows to specified additional extensions to be put in the created attribute certificate\&.
+This option allows one to specify additional extensions to be put in the created attribute certificate\&.
 .PP
 \fIoid\fR
 is the Object Identifier of the extensions\&. Any OID may be used even if it is not already known in advance\&. This must always be specified\&. There is no default\&.
@@ -270,7 +270,7 @@ is the value of the extensions\&. It is composed by two subfields,
 and
 \fIcontent\fR\&.
 \fItype\fR
-is a single charater, and specifies how the
+is a single character, and specifies how the
 \fIcontent\fR
 is interpreted\&. \*(Aq:\*(Aq means that
 \fIcontent\fR
@@ -293,7 +293,7 @@ This option adds the generic attribute specified to the AC generated\&. Please n
 .PP
 The file
 \fIfile\fR
-contains informations for additional ACs that should be included in the created proxy\&. ACs specified via the \-voinfo option shall be added before ACs specified via the command line options\&.
+contains information for additional ACs that should be included in the created proxy\&. ACs specified via the \-voinfo option shall be added before ACs specified via the command line options\&.
 .PP
 The format of the file is the following:
 .PP

doc/voms-proxy-fake.xml

@@ -194,7 +194,7 @@ of: <emphasis remap='I'>seconds</emphasis>, <emphasis remap='I'>hours:minutes</e
   have a CA=true bit in the Basic constraints Exception.</para>
 
 <para><option>-extension</option> <replaceable>oid[/criticality]value</replaceable></para>
-<para>This option allows to specified additional extensions to be put
+<para>This option allows one to specify additional extensions to be put
   in the created certificate.</para>
 <para><emphasis remap='I'>oid</emphasis> is the Object Identifier of
   the extensions.  Any OID may be used even if it is not already known
@@ -209,7 +209,7 @@ of: <emphasis remap='I'>seconds</emphasis>, <emphasis remap='I'>hours:minutes</e
   extensions. It is composed by two
   subfields, <emphasis remap='I'>type</emphasis>
   and <emphasis remap='I'>content</emphasis>. <emphasis remap='I'>type</emphasis>
-  is a single charater, and specifies how
+  is a single character, and specifies how
   the <emphasis remap='I'>content</emphasis> is interpreted.  ':'
   means that <emphasis remap='I'>content</emphasis> is a text string
   to be included as is. '~' means
@@ -219,7 +219,7 @@ of: <emphasis remap='I'>seconds</emphasis>, <emphasis remap='I'>hours:minutes</e
   which will contain the actual data.</para>  
 
 <para><option>-acextension</option> <replaceable>oid[/criticality]value</replaceable></para>
-<para>This option allows to specified additional extensions to be put
+<para>This option allows one to specify additional extensions to be put
   in the created attribute certificate.</para>
 <para><emphasis remap='I'>oid</emphasis> is the Object Identifier of
   the extensions.  Any OID may be used even if it is not already known
@@ -234,7 +234,7 @@ of: <emphasis remap='I'>seconds</emphasis>, <emphasis remap='I'>hours:minutes</e
   extensions. It is composed by two
   subfields, <emphasis remap='I'>type</emphasis>
   and <emphasis remap='I'>content</emphasis>. <emphasis remap='I'>type</emphasis>
-  is a single charater, and specifies how
+  is a single character, and specifies how
   the <emphasis remap='I'>content</emphasis> is interpreted.  ':'
   means that <emphasis remap='I'>content</emphasis> is a text string
   to be included as is. '~' means
@@ -249,7 +249,7 @@ of: <emphasis remap='I'>seconds</emphasis>, <emphasis remap='I'>hours:minutes</e
 <para><option>-voinfo</option> <replaceable>file</replaceable></para>
 
 <para>
-The file <emphasis remap='I'>file</emphasis> contains informations for
+The file <emphasis remap='I'>file</emphasis> contains information for
   additional ACs that should be included in the created proxy.  ACs
   specified via the -voinfo option shall be added before ACs specified
   via the command line options.</para>

doc/voms-proxy-info.1

@@ -28,7 +28,7 @@
 .\" * MAIN CONTENT STARTS HERE *
 .\" -----------------------------------------------------------------
 .SH "NAME"
-voms-proxy-info \- prints informations about a proxy with VOMS extensions
+voms-proxy-info \- prints information about a proxy with VOMS extensions
 .SH "SYNOPSIS"
 .HP \w'\fBvoms\-proxy\-info\fR\ 'u
 \fBvoms\-proxy\-info\fR [options]
@@ -55,7 +55,7 @@ Enables extra debug output\&. This is for bug reports only\&. Users must not rel
 The name of the file containing the proxy, in case it is in a non\-standard place\&.
 .PP
 \fB\-chain\fR
-Prints informations about the proxy\*(Aqs certificate chain\&.
+Prints information about the proxy\*(Aqs certificate chain\&.
 .PP
 \fB\-subject\fR
 Prints the DN of the proxy\*(Aqs subject\&.

doc/voms-proxy-info.xml

@@ -16,7 +16,7 @@
 
 <refnamediv id='name'>
 <refname>voms-proxy-info</refname>
-<refpurpose>prints informations about a proxy with VOMS extensions</refpurpose>
+<refpurpose>prints information about a proxy with VOMS extensions</refpurpose>
 </refnamediv>
 
 <refsynopsisdiv id='synopsis'>
@@ -56,7 +56,7 @@ The name of the file containing the proxy, in case it is in a
 non-standard place.</para>
 
 <para><option>-chain</option>
-Prints informations about the proxy's certificate chain.</para>
+Prints information about the proxy's certificate chain.</para>
 
 <para><option>-subject</option>
 Prints the DN of the proxy's subject.</para>

doc/voms-proxy-init.1

@@ -106,7 +106,7 @@ Location of new proxy cert
 \fB\-voms\fR
 \fIvoms[:command]\fR
 Specifies the VOMS server to contact using the nickname
-\fIvoms\fR\&. It also allows to send a specific command to the server\&. The default command is
+\fIvoms\fR\&. It also allows one to send a specific command to the server\&. The default command is
 \fB:all\fR, and it gets all group membership information\&. Other commands are
 \fB:/Role=rolename\fR
 which grants the
@@ -189,7 +189,7 @@ This option targets the generated AC to a specific host\&. This option may be sp
 .PP
 \fB\-timeout\fR
 \fIseconds\fR
-This option allows to specify the maximum number of seconds that voms\-proxy\-init will wait while trying to establish a connection with the server\&. Its default value is \-1 (unlimited)\&.
+This option allows one to specify the maximum number of seconds that voms\-proxy\-init will wait while trying to establish a connection with the server\&. Its default value is \-1 (unlimited)\&.
 .PP
 \fB\-noregen\fR
 Use existing proxy to contact the server and to sing the new proxy\&.

doc/voms-proxy-init.xml

@@ -96,7 +96,7 @@ Location of new proxy cert</para>
 
 <para><option>-voms</option> <replaceable>voms[:command]</replaceable>
 Specifies the VOMS server to contact using the nickname <emphasis
-remap='I'>voms</emphasis>.  It also allows to send a specific command
+remap='I'>voms</emphasis>.  It also allows one to send a specific command
 to the server.  The default command is <emphasis
 remap='B'>:all</emphasis>, and it gets all group membership information.
 
@@ -171,7 +171,7 @@ This option targets the generated AC to a specific host.  This
   hosts.</para>
 
 <para><option>-timeout</option> <replaceable>seconds</replaceable>
-This option allows to specify the maximum number of seconds that
+This option allows one to specify the maximum number of seconds that
   voms-proxy-init will wait while trying to establish a connection
   with the server.  Its default value is -1 (unlimited).</para>
 

doc/voms-proxy-list.1

@@ -28,7 +28,7 @@
 .\" * MAIN CONTENT STARTS HERE *
 .\" -----------------------------------------------------------------
 .SH "NAME"
-voms-proxy-list \- Shows a list of all availabel attributes from a specified server
+voms-proxy-list \- Shows a list of all available attributes from a specified server
 .SH "SYNOPSIS"
 .HP \w'\fBvoms\-proxy\-list\fR\ 'u
 \fBvoms\-proxy\-list\fR [options]