Lilith

Lilith (@lilithapp) is a logging and access event viewer for Logback, log4j™, Log4j 2™ and java.util.logging.

It has features roughly comparable to Chainsaw for log4j™, but with an emphasis on stability, high performance and throughput. In contrast to Chainsaw, it is handling received logging events using the hard disk instead of keeping them in memory. Because of this, it is able to handle millions of events from several sources at the same time.

Getting started...

...with Logback...

...and logback-classic SocketAppender.

Lilith is listening for logback-classic SocketAppender connections on port 4445 or port 4560.

A SocketAppender establishes a connection with exactly one host that is defined in the RemoteHost property.

Add the following to your applications logback.xml:

<appender name="LogbackClassic" class="ch.qos.logback.classic.net.SocketAppender">
  <RemoteHost>localhost</RemoteHost>
  <Port>4560</Port>
  <ReconnectionDelay>170</ReconnectionDelay>
  <IncludeCallerData>true</IncludeCallerData>
</appender>

You also have to attach the appender to some logger, e.g. the root logger...

<root level="INFO">
  <appender-ref ref="LogbackClassic"/>
</root>

... or a specific logger...

<logger name="foo.Bar" level="DEBUG">
  <appender-ref ref="LogbackClassic"/>
</logger>

Using logback-classic SocketAppender requires ch.qos.logback:logback-classic as runtime dependency.

Take a look at the Logback manual and the Lilith help for more information.

...and Lilith ClassicMultiplexSocketAppender.

Lilith is listening for Lilith ClassicMultiplexSocketAppender connections on port 10000 (compressed) and 10001 (uncompressed).

The Lilith ClassicMultiplexSocketAppender is a replacement for the logback-classic SocketAppender.

This appender, in contrast to logbacks, supports logger.debug("{} {}", new Object[]{foo, bar, throwable), i.e. if the last given parameter of a log message is a Throwable and it is not used up in the message pattern then it will be used as the Throwable of the LoggingEvent, similar to logger.debug(""+foo+" "+bar, throwable).

While logbacks appender is stream-based, i.e. it streams logging events using an ObjectOutputStream, the Lilith appender is message based, i.e. it sends logging events one after the other as single messages.

A message consists of an integer that specifies the number of bytes of the following event, followed by the bytes of the serialized event.

This has several benefits:

Sending to multiple remote hosts is supported while the event is only serialized once.
Events can (and should) be compressed using GZIP.
The appender supports heartbeat and timeout.
- The event receiver can find out that the event sender connection died if a heartbeat is missing.
- The event sender can find out that the event receiver connection died by means of a timeout This means that an application won't stop (at least not for very long) in case of network problem.

The multiplex appenders are now creating a UUID be default. This enables Lilith to reattach a connection to an existing view after the connection has been lost for some reason. It has the advantage that already executing filters won't have to be restarted for every new connection. The previous behavior can be enforced by disabling the creation of the UUID by means of <CreatingUUID>false</CreatingUUID> in the Logback configuration.

Add the following to your applications logback.xml:

<appender name="multiplex" class="de.huxhorn.lilith.logback.appender.ClassicMultiplexSocketAppender">
  <Compressing>true</Compressing>
  <!-- will automatically use correct default port -->
  <!-- Default port for compressed is 10000 and uncompressed 10001 -->
  <ReconnectionDelay>10000</ReconnectionDelay>
  <IncludeCallerData>true</IncludeCallerData>
  <RemoteHosts>localhost, 10.200.55.13</RemoteHosts>
  <!-- Alternatively:
  <RemoteHost>localhost</RemoteHost>
  <RemoteHost>10.200.55.13</RemoteHost>
  -->
  <!--
  Optional:
  <CreatingUUID>false</CreatingUUID>
  -->
</appender>

You also have to attach the appender to some logger, e.g. the root logger...

<root level="INFO">
  <appender-ref ref="multiplex"/>
</root>

... or a specific logger...

<logger name="foo.Bar" level="DEBUG">
  <appender-ref ref="multiplex"/>
</logger>

Using Lilith ClassicMultiplexSocketAppender requires de.huxhorn.lilith:de.huxhorn.lilith.logback.appender.multiplex-classic as runtime dependency.

Take a look at the Logback manual and the Lilith help for more information.

...and logback-classic with FileAppender.

Starting with Lilith 0.9.38 and Logback 0.9.19, you can write Lilith files directly from within Logback.

Those files can be opened by Lilith using either the Open command or drag&drop.

You can also use the tail and cat command available in the executable Lilith jar. This has the huge advantage that you can decide about the layout pattern of the log file output at the time you are executing the above commands instead of while defining the file appender.

  Commands:
    cat      Cat the given file.
      Usage: cat [options] 'cat' the given Lilith logfile.
        Options:
          -n, --number-of-lines   number of entries printed by 'cat'.
                                  Default: -1
          -p, --pattern           pattern used by 'cat'. See
                                  http://logback.qos.ch/manual/layouts.html#ClassicPatternLayout and
                                  http://logback.qos.ch/manual/layouts.html#AccessPatternLayout

    tail      Tail the given file.
      Usage: tail [options] 'tail' the given Lilith logfile.
        Options:
          -f, --keep-running      keep tailing the given Lilith logfile.
                                  Default: false
          -n, --number-of-lines   number of entries printed by 'tail'.
                                  Default: 20
          -p, --pattern           pattern used by 'tail'. See
                                  http://logback.qos.ch/manual/layouts.html#ClassicPatternLayout and
                                  http://logback.qos.ch/manual/layouts.html#AccessPatternLayout

Add the following to your applications logback.xml:

<appender name="FILE" class="ch.qos.logback.core.FileAppender">
  <file>classic.lilith</file>
  <encoder class="de.huxhorn.lilith.logback.encoder.ClassicLilithEncoder">
    <IncludeCallerData>true</IncludeCallerData>
  </encoder>
</appender>

You also have to attach the appender to some logger, e.g. the root logger...

<root level="INFO">
  <appender-ref ref="FILE"/>
</root>

... or a specific logger...

<logger name="foo.Bar" level="DEBUG">
  <appender-ref ref="FILE"/>
</logger>

Using Lilith ClassicLilithEncoder requires de.huxhorn.lilith:de.huxhorn.lilith.logback.encoder.classic as runtime dependency.

Take a look at the Logback manual and the Lilith help for more information.

...and logback-access SocketAppender.

Lilith listens for logback-access SocketAppender connections on port 4570.

A SocketAppender establishes a connection with exactly one host that is defined in the RemoteHost property.

Add the following to your applications logback-access.xml:

<appender name="LogbackAccess" class="ch.qos.logback.access.net.SocketAppender"> 
  <RemoteHost>localhost</RemoteHost>
  <Port>4570</Port> 
  <ReconnectionDelay>170</ReconnectionDelay> 
  <IncludeCallerData>true</IncludeCallerData>
</appender>

and

<appender-ref ref="LogbackAccess" />

Using logback-access SocketAppender requires ch.qos.logback:logback-access as runtime dependency.

Take a look at the Logback manual and the Lilith help for more information.

...and Lilith AccessMultiplexSocketAppender.

Lilith is listening for Lilith AccessMultiplexSocketAppender connections on port 10010 (compressed) and 10011 (uncompressed).

The Lilith AccessMultiplexSocketAppender is a replacement for the logback-access SocketAppender.

While logbacks appender is stream-based, i.e. it streams logging events using an ObjectOutputStream, the Lilith appender is message based, i.e. it sends logging events one after the other as single messages.

A message consists of an integer that specifies the number of bytes of the following event, followed by the bytes of the serialized event.

This has several benefits:

Sending to multiple remote hosts is supported while the event is only serialized once.
Events can (and should) be compressed using GZIP.
The appender supports heartbeat and timeout.
- The event receiver can find out that the event sender connection died if a heartbeat is missing.
- The event sender can find out that the event receiver connection died by means of a timeout This means that an application won't stop (at least not for very long) in case of network problem.

Add the following to your applications logback-access.xml:

<appender name="multiplex" class="de.huxhorn.lilith.logback.appender.access.AccessMultiplexSocketAppender">
  <Compressing>true</Compressing> <!-- will automatically use correct default port -->
  <!-- Default port for compressed is 10010 and uncompressed 10011 -->
  <ReconnectionDelay>30000</ReconnectionDelay>
  <RemoteHosts>localhost</RemoteHosts>
</appender>

and

<appender-ref ref="multiplex" />

Using Lilith AccessMultiplexSocketAppender requires de.huxhorn.lilith:de.huxhorn.lilith.logback.appender.multiplex-access as runtime dependency.

Take a look at the Logback manual and the Lilith help for more information.

...and logback-access with FileAppender.

Starting with Lilith 0.9.38 and Logback 0.9.19, you can write Lilith files directly from within Logback.

Those files can be opened by Lilith using either the Open command or drag&drop.

You can also use the tail and cat command available in the executable Lilith jar. This has the huge advantage that you can decide about the layout pattern of the log file output at the time you are executing the above commands instead of while defining the file appender.

  Commands:
    cat      Cat the given file.
      Usage: cat [options] 'cat' the given Lilith logfile.
        Options:
          -n, --number-of-lines   number of entries printed by 'cat'.
                                  Default: -1
          -p, --pattern           pattern used by 'cat'. See
                                  http://logback.qos.ch/manual/layouts.html#ClassicPatternLayout and
                                  http://logback.qos.ch/manual/layouts.html#AccessPatternLayout

    tail      Tail the given file.
      Usage: tail [options] 'tail' the given Lilith logfile.
        Options:
          -f, --keep-running      keep tailing the given Lilith logfile.
                                  Default: false
          -n, --number-of-lines   number of entries printed by 'tail'.
                                  Default: 20
          -p, --pattern           pattern used by 'tail'. See
                                  http://logback.qos.ch/manual/layouts.html#ClassicPatternLayout and
                                  http://logback.qos.ch/manual/layouts.html#AccessPatternLayout

Add the following to your applications logback-access.xml:

<appender name="FILE" class="ch.qos.logback.core.FileAppender">
  <file>classic.lilith</file>
  <encoder class="de.huxhorn.lilith.logback.encoder.access.AccessLilithEncoder">
    <IncludeCallerData>true</IncludeCallerData>
  </encoder>
</appender>

<appender-ref ref="FILE" />

Using Lilith AccessLilithEncoder requires de.huxhorn.lilith:de.huxhorn.lilith.logback.encoder.access as runtime dependency.

Take a look at the Logback manual and the Lilith help for more information.

...with Log4j 2™.

Lilith is listening for Log4j 2™ SocketAppender connections...

...using SerializedLayout on port 4445 or port 4560.
...using JsonLayout on port 12000.
...using YamlLayout on port 12010.
...using XmlLayout on port 12020.

<?xml version="1.0" encoding="UTF-8"?>
<configuration status="debug">
  <appenders>
    <Console name="Console" target="SYSTEM_OUT">
      <PatternLayout pattern="%d{HH:mm:ss.SSS} [%t] %-5level %logger{36} --- %msg%n"/>
    </Console>
    <Socket name="Socket-JSON" host="localhost" port="12000" protocol="TCP">
      <JsonLayout includeNullDelimiter="true" />
    </Socket>
    <Socket name="Socket-YAML" host="localhost" port="12010" protocol="TCP">
      <YamlLayout includeNullDelimiter="true" />
    </Socket>
    <Socket name="Socket-XML" host="localhost" port="12020" protocol="TCP">
      <XmlLayout includeNullDelimiter="true" />
    </Socket>
    <Socket name="Socket-Serialized" host="localhost" port="4560" protocol="TCP">
      <SerializedLayout />
    </Socket>
  </appenders>
  <loggers>
    <root level="all">
      <appender-ref ref="Console"/>
      <appender-ref ref="Socket-JSON"/>
      <appender-ref ref="Socket-YAML"/>
      <appender-ref ref="Socket-XML"/>
      <appender-ref ref="Socket-Serialized"/>
    </root>
  </loggers>
</configuration>

SerializedLayout has been deprecated in Log4j2 2.9.0. You should instead use one one of the other options.

Take a look at the Log4j 2™ manual for more information.

...with log4j™.

Lilith is listening for log4j™ SocketAppender connections on port 4445 or port 4560.

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
  <appender name="socket" class="org.apache.log4j.net.SocketAppender">
    <param name="Application" value="YourApplication"/>
    <param name="locationInfo" value="true"/>
    <param name="Port" value="4560"/>
    <param name="RemoteHost" value="127.0.0.1"/>
    <param name="ReconnectionDelay" value="10"/>
  </appender>
    
  <root>
    <priority value ="ALL" />
    <appender-ref ref="socket" />
  </root>
</log4j:configuration>

Take a look at the log4j™ manual for more information.

...with java.util.logging.SocketHandler.

Some people are forced to use java.util.logging. If you are one of those poor souls, you have my deepest sympathy. Seriously.

Lilith is listening for java.util.logging SocketHandler connections on port 11020.

If you are not exactly forced to keep using java.util.logging I'd seriously suggest to consider a switch to the SLF4J/Logback combination.

The only missing feature that java.util.logging has to offer are user-defined log-levels, albeit very, very poorly implemented. If you are actually using this feature then you are risking a memory leak. It would be a wise decision to use the SLF4J-Marker-support instead.

The java.util.logging SocketHandler does also have one major downside compared to all alternatives:

It will only send the top-most exception of an exception-hierarchy. You won't be able to see the root-cause(s) of an exception.
Suppressed exceptions, as introduced in Java 7, are also ignored.

Check out this list of reasons to prefer logback over log4j™ for a quite detailed overview of the advantages you'll get if you decide to take the dive. While this page isn't related to java.util.logging it will still give you a very good summary of all the nice features you'll get.

Last but not least, you'd be able to use the Lilith ClassicMultiplexSocketAppender, a partially asynchronous appender designed for high-performance multiple-recipient usage in a live environment.

Configure java.util.logging as usual and define a SocketHandler connecting to port 11020.

Logger rootLogger=Logger.getLogger("");
try {
    SocketHandler fh = new SocketHandler("127.0.0.1", 11020);
    fh.setEncoding("UTF-8");
    fh.setFormatter(new XMLFormatter());
    rootLogger.addHandler(fh);
} catch(IOException ex) {
    System.out.println("Couldn't connect the SocketHandler. Nope, no reconnect. What a fail.");
    ex.printStackTrace();
}

Building from source

To build Lilith from source, you need to first clone both huxi/sulky and huxi/lilith.

Using Gradle

Both sulky and lilith are built using Gradle.

You have two options:

install Gradle on your system (but please make sure that you are using the correct version, most likely the latest)
Use the gradlew wrapper scripts, either ./gradlew (unix-like systems) or gradlew.bat (Windows)

Using the gradlew wrapper has the advantage that it always uses the correct gradle version but has the disadvantage that it is harder to use in submodules compared to a gradle installation in the path.

If you want to rebuild a submodule using gradlew, you have to change into the respective sub-directory and execute gradlew with the correct amount of ../ prepended to the command.

Whenever I use gradle in the remainder of the document, I refer to either the locally installed gradle in your path or the gradlew wrapper script as explained above.

Building sulky

Change into your local sulky directory and execute gradle.

This builds and tests all sulky modules.

Executing gradle javadocZip/gradle sourceZip creates a zip containing all javadocs/sources in build/distributions.

Building lilith

Building lilith requires that you've built sulky first.

Then change into your local lilith directory and execute gradle.

This creates all Lilith artifacts in lilith/build/distributions and lilith/build/libs.

Executing gradle javadocZip/gradle sourceZip creates a zip containing all javadocs/sources in build/distributions.

Help me!

I'm looking for help concerning the development of IDE plugins.

I've already developed a plugin for IntelliJ IDEA (my IDE of choice) myself. It is contained in the lilith-idea-plugin folder. This plugin opens a ServerSocket on port 11111 and expects serialized StackTraceElement instances. Lilith sends those events whenever the user clicks on either a callstack, an exception or part of an exception stacktrace. The plugin is doing its best to open the source location of the received element in the IDE.

Unfortunately, I have neither time nor know-how about plugin development for either Eclipse or NetBeans. It would be very nice if you could could help me out.

I'd also appreciate any help documenting Lilith.

And I'm always eager to hear your opinion.

Thanks

Thanks to Ceki Gülcü (@ceki) for developing Logback, the Gradle (@Gradleware) community and all persons that have been involved with Lilith development.

I'd also like to thank the developers of Marked (@MarkedApp) for a really helpful, awesome and reasonably priced product.

Similarly, Tower (@gittower) is a really nice git client.

And, of course, thanks to the IntelliJ IDEA (@intellijidea) for the best Java IDE and their support of open source projects.

(This is all free advertisement, I don't get money from any of them.)

Legal mumbo-jumbo

Apache Extras Companion for Apache log4j, Apache log4j, Apache, the Apache feather logo, the Apache Logging Services project logo, the log4j logo, and the Built by Maven logo are trademarks of The Apache Software Foundation. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

All parts of Lilith that can be embedded into an application are LGPL/ASL dual-licensed. Lilith itself is GPL-licensed.

All Your Base Are Belong To Us.

Name		Name	Last commit message	Last commit date
Latest commit History 2,379 Commits
3rdparty/junique		3rdparty/junique
benchmark/src/main		benchmark/src/main
buildSrc/src/main		buildSrc/src/main
config		config
gradle/wrapper		gradle/wrapper
images		images
jul		jul
lilith-conditions/src		lilith-conditions/src
lilith-constants/src/main/java/de/huxhorn/lilith/api		lilith-constants/src/main/java/de/huxhorn/lilith/api
lilith-data		lilith-data
lilith-engine/src		lilith-engine/src
lilith-idea-plugin		lilith-idea-plugin
lilith-json-logging/src		lilith-json-logging/src
lilith-prefs		lilith-prefs
lilith-sender/src/main/java/de/huxhorn/lilith/sender		lilith-sender/src/main/java/de/huxhorn/lilith/sender
lilith-sounds/src/main/resources/events		lilith-sounds/src/main/resources/events
lilith-xml-logging/src		lilith-xml-logging/src
lilith		lilith
log4j		log4j
logback		logback
misc		misc
presentation		presentation
releases		releases
sandbox		sandbox
slf4j/src		slf4j/src
tracing/src		tracing/src
.editorconfig		.editorconfig
.gitignore		.gitignore
.travis.yml		.travis.yml
CHANGELOG.md		CHANGELOG.md
COPYING		COPYING
COPYING.LESSER		COPYING.LESSER
LICENSE-2.0.txt		LICENSE-2.0.txt
README.md		README.md
TODO.md		TODO.md
build.gradle		build.gradle
current-version.txt		current-version.txt
dependencyDefinitions.gradle		dependencyDefinitions.gradle
gradlew		gradlew
gradlew.bat		gradlew.bat
icon.png		icon.png
licenseTemplateGPL.java		licenseTemplateGPL.java
licenseTemplateLGPL.java		licenseTemplateLGPL.java
maven-repository.txt		maven-repository.txt
projectDependencies.gradle		projectDependencies.gradle
release-procedure.txt		release-procedure.txt
release-version.txt		release-version.txt
settings.gradle		settings.gradle

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Licenses found

Repository files navigation

Lilith

Getting started...

...with Logback...

...and logback-classic SocketAppender.

...and Lilith ClassicMultiplexSocketAppender.

...and logback-classic with FileAppender.

...and logback-access SocketAppender.

...and Lilith AccessMultiplexSocketAppender.

...and logback-access with FileAppender.

...with Log4j 2™.

...with log4j™.

...with java.util.logging.SocketHandler.

Building from source

Using Gradle

Building sulky

Building lilith

Help me!

Thanks

Legal mumbo-jumbo

About

Licenses found

Releases

Packages

Contributors 2

Languages

License

Licenses found

huxi/lilith

Folders and files

Latest commit

History

Repository files navigation

Lilith

Getting started...

...with Logback...

...and logback-classic SocketAppender.

...and Lilith ClassicMultiplexSocketAppender.

...and logback-classic with FileAppender.

...and logback-access SocketAppender.

...and Lilith AccessMultiplexSocketAppender.

...and logback-access with FileAppender.

...with Log4j 2™.

...with log4j™.

...with java.util.logging.SocketHandler.

Building from source

Using Gradle

Building sulky

Building lilith

Help me!

Thanks

Legal mumbo-jumbo

About

Topics

Resources

License

Licenses found

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Languages

Packages