Remove unecessary comments

hackable-devices · Sep 18, 2014 · 0c7ff80 · 0c7ff80
1 parent 95b520e
commit 0c7ff80
Showing 1 changed file with 0 additions and 6 deletions.
diff --git a/PrintrBotPlugin/Resources/calibration_cube.gcode b/PrintrBotPlugin/Resources/calibration_cube.gcode
@@ -1,10 +1,5 @@
 ; generated by Slic3r 1.1.7 on 2014-09-15 at 12:42:08
 
-; perimeters extrusion width = 0.40mm
-; infill extrusion width = 1.28mm
-; solid infill extrusion width = 0.68mm
-; top infill extrusion width = 0.68mm
-
 G21 ; set units to millimeters
 M107
 G1 Z20;
@@ -204,4 +199,3 @@ M104 S0 ; turn off temperature
 G28 X0  ; home X axis
 g28 y0  ; home y axis
 M84     ; disable motors
-; filament used = 870.7mm (2.1cm3)