docs: make sure all docs codeblock lines in advanced match after changes

docs/docs/about/modelling/examples/advanced.mdx

@@ -259,7 +259,7 @@ We will now fill in the final placeholders with detailed [ENERGY_USAGE_MODEL](/a
 
 `Fixed production loads A` has a load of 7.6 MW with additional 4.1 MW when the field gas injection rate is positive:
 
-<CodeLinesFromFile title="model.yaml" start={147} end={152} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile title="model.yaml" start={151} end={156} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 `Gas export compressor system A` is represented by a consumer system of two simplified compressor train models.
 The system has defined the variable [gasratea_cd](#variables) and will run two different
@@ -270,7 +270,7 @@ setting that returns a valid result for the compressors.
 See [COMPRESSOR_SYSTEM](/about/modelling/setup/installations/compressor_models_in_calculations/compressor_system.md) for further details.
 
 The compressor model is then defined:
-<CodeLinesFromFile start={153} end={169} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={157} end={173} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 `Water injection pump system A` is variable and its energy function is dependent on the field's water
 injection rate (`WATER_INJ`) that is set in the variable [water_injection_rate](#variables) as `SIM;WATER_INJ`.
@@ -280,34 +280,34 @@ is also defined.
 
 This PUMP_SYSTEM behaves much the same as the COMPRESSOR_SYSTEM above.
 See [PUMP_SYSTEM](/about/modelling/setup/installations/pump_models_in_calculations.md#pump_system-energy-usage-model) for further details.
-<CodeLinesFromFile start={170} end={199} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={174} end={203} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 `Single pump A` has an energy function that is dependent on the seawater injection rate, same as the system above.
 It uses the pump_chart defined in [FACILITY_INPUTS](#facility_inputs) above.
 
 The pump model is then defined:
-<CodeLinesFromFile start={200} end={209} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={204} end={213} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 The `Flare A` is changing on the 1st of July 2020 and 1st of January 2030. Therefore, we need to use a different constant
 fuel consumption value before and after this date. This is done using the variable [flare_a_fuel_rate_sm3_day](#variables).
 
 The model becomes:
-<CodeLinesFromFile start={211} end={216} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={215} end={220} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 `Base production loads B` has a load of 7.6 :
-<CodeLinesFromFile start={228} end={233} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={232} end={237} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 The `Flare B` is changing on the 1st of July 2020 and 1st of January 2030. Therefore, we need to use a different constant
 fuel consumption value before and after this date. This is done using the variable [flare_a_fuel_rate_sm3_day](#variables).
 
 The model becomes:
-<CodeLinesFromFile start={235} end={240} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={239} end={244} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 The `Gas export compressors B`  is a variable fuel consumer whose energy function depends on the field gas production rate (`GAS_PROD`) defined
 in the variable [gasrateb_cd](#variables) as `SIM;GAS_PROD`, and put to the condition [gas_export_condition](#variables) as `SIM;GAS_PROD > 0`
 
 The model is specified:
-<CodeLinesFromFile start={242} end={269} language="yaml">{yamlModel}</CodeLinesFromFile>
+<CodeLinesFromFile start={246} end={273} language="yaml">{yamlModel}</CodeLinesFromFile>
 
 ## Full eCalc YAML model
 <CodeBlock title="model.yaml" language="yaml">{yamlModel}</CodeBlock>