build(deps): bump bitflags from 1.3.2 to 2.3.3

[dependabot]

Bumps bitflags from 1.3.2 to 2.3.3.

Release notes

Sourced from bitflags's releases.

2.3.3

Changes to -=

The -= operator was incorrectly changed to truncate bits that didn't correspond to valid flags in 2.3.0. This has been fixed up so it once again behaves the same as - and difference.

Changes to !

The ! operator previously called Self::from_bits_truncate, which would truncate any bits that only partially overlapped with a valid flag. It will now use bits & Self::all().bits(), so any bits that overlap any bits specified by any flag will be respected. This is unlikely to have any practical implications, but enables defining a flag like const ALL = !0 as a way to signal that any bit pattern is a known set of flags.

Changes to formatting

Zero-valued flags will never be printed. You'll either get 0x0 for empty flags using debug formatting, or the set of flags with zero-valued flags omitted for others.

Composite flags will no longer be redundantly printed if there are extra bits to print at the end that don't correspond to a valid flag.

What's Changed

• Fix up incorrect sub assign behavior and other cleanups by @​KodrAus in bitflags/bitflags#366

Full Changelog: bitflags/bitflags@2.3.2...2.3.3

2.3.2

What's Changed

• [doc] [src/lib.rs] delete redundant path prefix by @​OccupyMars2025 in bitflags/bitflags#361
• Prepare for 2.3.2 release by @​KodrAus in bitflags/bitflags#362

New Contributors

• @​OccupyMars2025 made their first contribution in bitflags/bitflags#361

Full Changelog: bitflags/bitflags@2.3.1...2.3.2

2.3.1

What's Changed

• Fix Self in flags value expressions by @​KodrAus in bitflags/bitflags#355
• Prepare for 2.3.1 release by @​KodrAus in bitflags/bitflags#358

Full Changelog: bitflags/bitflags@2.3.0...2.3.1

2.3.0

Major changes

BitFlags trait deprecated in favor of Flags trait

This release introduces the Flags trait and deprecates the BitFlags trait. These two traits are semver compatible so if you have public API code depending on BitFlags you can move to Flags without breaking end-users. This is possible because the BitFlags trait was never publicly implementable, so it now carries Flags as a supertrait. All implementations of Flags additionally implement BitFlags.

... (truncated)

Changelog

Sourced from bitflags's changelog.

2.3.3

Changes to -=

The -= operator was incorrectly changed to truncate bits that didn't correspond to valid flags in 2.3.0. This has been fixed up so it once again behaves the same as - and difference.

Changes to !

The ! operator previously called Self::from_bits_truncate, which would truncate any bits that only partially overlapped with a valid flag. It will now use bits & Self::all().bits(), so any bits that overlap any bits specified by any flag will be respected. This is unlikely to have any practical implications, but enables defining a flag like const ALL = !0 as a way to signal that any bit pattern is a known set of flags.

Changes to formatting

Zero-valued flags will never be printed. You'll either get 0x0 for empty flags using debug formatting, or the set of flags with zero-valued flags omitted for others.

Composite flags will no longer be redundantly printed if there are extra bits to print at the end that don't correspond to a valid flag.

What's Changed

• Fix up incorrect sub assign behavior and other cleanups by @​KodrAus in bitflags/bitflags#366

Full Changelog: bitflags/bitflags@2.3.2...2.3.3

2.3.2

What's Changed

• [doc] [src/lib.rs] delete redundant path prefix by @​OccupyMars2025 in bitflags/bitflags#361

New Contributors

• @​OccupyMars2025 made their first contribution in bitflags/bitflags#361

Full Changelog: bitflags/bitflags@2.3.1...2.3.2

2.3.1

What's Changed

• Fix Self in flags value expressions by @​KodrAus in bitflags/bitflags#355

Full Changelog: bitflags/bitflags@2.3.0...2.3.1

2.3.0

What's Changed

• Support ejecting flags types from the bitflags macro by @​KodrAus in bitflags/bitflags#351

Full Changelog: bitflags/bitflags@2.2.1...2.3.0

... (truncated)

Commits

• 6ed2e8d Merge pull request #367 from KodrAus/cargo/2.3.3
• 290961e prepare for 2.3.3 release
• 3ac85e2 Merge pull request #366 from KodrAus/feat/test-cleanups
• 64b7c98 include tests for hex, binary, and octal
• b344782 remove unneeded condition
• 8f5f7cc fill in tests for intersection and union
• 481e13f fill in tests for insert remove and toggle
• 4b71f86 only yield flags if they include as-yet unyielded bits
• 330a028 fill in some more tests
• b933056 fill in tests for from_* methods
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)