Name

lua-resty-jwt - JWT for ngx_lua and LuaJIT

Attention ❗ the hmac lib used here is lua-resty-hmac, not the one in luarocks.

Installation

• opm: opm get SkyLothar/lua-resty-jwt
• luarocks: luarocks install lua-resty-jwt
• Head to release page and download tar.gz

version

0.1.10

Table of Contents

• Name
• Status
• Description
• Synopsis
• Methods
  • sign
  • verify
  • load and verify
  • sign JWE
• Verification
  • JWT Validators
  • Legacy/Timeframe options
• Example
• Installation
• Testing With Docker
• Authors
• See Also

Status

This library is under active development but is considered production ready.

Description

This library requires an nginx build with OpenSSL, the ngx_lua module, the LuaJIT 2.0, the lua-resty-hmac, and the lua-resty-string,

Synopsis

    # nginx.conf:

    lua_package_path "/path/to/lua-resty-jwt/lib/?.lua;;";

    server {
        default_type text/plain;
        location = /verify {
            content_by_lua '
                local cjson = require "cjson"
                local jwt = require "resty.jwt"

                local jwt_token = "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9" ..
                    ".eyJmb28iOiJiYXIifQ" ..
                    ".VAoRL1IU0nOguxURF2ZcKR0SGKE1gCbqwyh8u2MLAyY"
                local jwt_obj = jwt:verify("lua-resty-jwt", jwt_token)
                ngx.say(cjson.encode(jwt_obj))
            ';
        }
        location = /sign {
            content_by_lua '
                local cjson = require "cjson"
                local jwt = require "resty.jwt"

                local jwt_token = jwt:sign(
                    "lua-resty-jwt",
                    {
                        header={typ="JWT", alg="HS256"},
                        payload={foo="bar"}
                    }
                )
                ngx.say(jwt_token)
            ';
        }
    }

Back to TOC

Methods

To load this library,

1. you need to specify this library's path in ngx_lua's lua_package_path directive. For example, lua_package_path "/path/to/lua-resty-jwt/lib/?.lua;;";.
2. you use require to load the library into a local Lua variable:

    local jwt = require "resty.jwt"

Back to TOC

sign

syntax: local jwt_token = jwt:sign(key, table_of_jwt)

sign a table_of_jwt to a jwt_token.

The alg argument specifies which hashing algorithm to use (HS256, HS512, RS256).

sample of table_of_jwt

{
    "header": {"typ": "JWT", "alg": "HS512"},
    "payload": {"foo": "bar"}
}

verify

syntax: local jwt_obj = jwt:verify(key, jwt_token [, claim_spec [, ...]])

verify a jwt_token and returns a jwt_obj table. key can be a pre-shared key (as a string), or a function which takes a single parameter (the value of kid from the header) and returns either the pre-shared key (as a string) for the kid or nil if the kid lookup failed. This call will fail if you try to specify a function for key and there is no kid existing in the header.

See Verification for details on the format of claim_spec parameters.

load & verify

syntax: local jwt_obj = jwt:load_jwt(jwt_token)
syntax: local verified = jwt:verify_jwt_obj(key, jwt_obj [, claim_spec [, ...]])

verify = load_jwt + verify_jwt_obj

load jwt, check for kid, then verify it with the correct key

sample of jwt_obj

{
    "raw_header": "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9",
    "raw_payload: "eyJmb28iOiJiYXIifQ",
    "signature": "wrong-signature",
    "header": {"typ": "JWT", "alg": "HS256"},
    "payload": {"foo": "bar"},
    "verified": false,
    "valid": true,
    "reason": "signature mismatched: wrong-signature"
}

sign-jwe

syntax: local jwt_token = jwt:sign(key, table_of_jwt)

sign a table_of_jwt to a jwt_token.

The alg argument specifies which hashing algorithm to use for encrypting key (dir). The enc argument specifies which hashing algorithm to use for encrypting payload (A128CBC-HS256, A256CBC-HS512)

sample of table_of_jwt

{
    "header": {"typ": "JWE", "alg": "dir", "enc":"A128CBC-HS256"},
    "payload": {"foo": "bar"}
}

Back to TOC

Verification

Both the jwt:load and jwt:verify_jwt_obj functions take, as additional parameters, any number of optional claim_spec parameters. A claim_spec is simply a lua table of claims and validators. Each key in the claim_spec table corresponds to a matching key in the payload, and the validator is a function that will be called to determine if the claims are met.

The signature of a validator function is:

function(val, claim, jwt_json)

Where val is the value of the claim from the jwt_obj being tested (or nil if it doesn't exist in the object's payload), claim is the name of the claim that is being verified, and jwt_json is a json-serialized representation of the object that is being verified. If the function has no need of the claim or jwt_json, parameters, they may be left off.

A validator function returns either true or false. Any validator MAY raise an error, and the validation will be treated as a failure, and the error that was raised will be put into the reason field of the resulting object. If a validator returns nothing (i.e. nil), then the function is treated to have succeeded - under the assumption that it would have raised an error if it would have failed.

A special claim named __jwt can be used such that if a validator function exists for it, then the validator will be called with a deep clone of the entire parsed jwt object as the value of val. This is so that you can write verifications for an entire object that may depend on one or more claims.

Multiple claim_spec tables can be specified to the jwt:load and jwt:verify_jwt_obj - and they will be executed in order. There is no guarantee of the execution order of individual validators within a single claim_spec. If a claim_spec fails, then any following claim_specs will NOT be executed.

sample claim_spec

{
    sub = function(val) return string.match("^[a-z]+$", val) end,
    iss = function(val)
        for _, value in pairs({ "first", "second" }) do
            if value == val then return true end
        end
        return false
    end,
    __jwt = function(val, claim, jwt_json)
        if val.payload.foo == nil or val.payload.bar == nil then
            error("Need to specify either 'foo' or 'bar'")
        end
    end
}

JWT Validators

A library of helpful validator functions exists at resty.jwt-validators. You can use this library by including:

local validators = require "resty.jwt-validators"

The following functions are currently defined in the validator library. Those marked with "(opt)" means that the same function exists named opt_<name> which takes the same parameters. The "opt" version of the function will return true if the key does not exist in the payload of the jwt_object being verified, while the "non-opt" version of the function will return false if the key does not exist in the payload of the jwt_object being verified.

validators.chain(...)

Returns a validator that chains the given functions together, one after another - as long as they keep passing their checks.

validators.required(chain_function)

Returns a validator that returns false if a value doesn't exist. If the value exists and a chain_function is specified, then the value of chain_function(val, claim, jwt_json) will be returned, otherwise, true will be returned. This allows for specifying that a value is both required and it must match some additional check.

validators.require_one_of(claim_keys)

Returns a validator which errors with a message if NONE of the given claim keys exist. It is expected that this function is used against a full jwt object. The claim_keys must be a non-empty table of strings.

validators.check(check_val, check_function, name, check_type) (opt)

Returns a validator that checks if the result of calling the given check_function for the tested value and check_val returns true. The value of check_val and check_function cannot be nil. The optional name is used for error messages and defaults to "check_value". The optional check_type is used to make sure that the check type matches and defaults to type(check_val). The first parameter passed to check_function will never be nil. If the check_function raises an error, that will be appended to the error message.

validators.equals(check_val) (opt)

Returns a validator that checks if a value exactly equals (using ==) the given check_value. The value of check_val cannot be nil.

validators.matches(pattern) (opt)

Returns a validator that checks if a value matches the given pattern (using string.match). The value of pattern must be a string.

validators.any_of(check_values, check_function, name, check_type, table_type) (opt)

Returns a validator which calls the given check_function for each of the given check_values and the tested value. If any of these calls return true, then this function returns true. The value of check_values must be a non-empty table with all the same types, and the value of check_function must not be nil. The optional name is used for error messages and defaults to "check_values". The optional check_type is used to make sure that the check type matches and defaults to type(check_values[1]) - the table type.

validators.equals_any_of(check_values) (opt)

Returns a validator that checks if a value exactly equals any of the given check_values.

validators.matches_any_of(patterns) (opt)

Returns a validator that checks if a value matches any of the given patterns.

validators.contains_any_of(check_values,name) (opt)

Returns a validator that checks if a value of expected type string exists in any of the given check_values. The value of check_valuesmust be a non-empty table with all the same types. The optional name is used for error messages and defaults to check_values.

validators.greater_than(check_val) (opt)

Returns a validator that checks how a value compares (numerically, using >) to a given check_value. The value of check_val cannot be nil and must be a number.

validators.greater_than_or_equal(check_val) (opt)

Returns a validator that checks how a value compares (numerically, using >=) to a given check_value. The value of check_val cannot be nil and must be a number.

validators.less_than(check_val) (opt)

Returns a validator that checks how a value compares (numerically, using <) to a given check_value. The value of check_val cannot be nil and must be a number.

validators.less_than_or_equal(check_val) (opt)

Returns a validator that checks how a value compares (numerically, using <=) to a given check_value. The value of check_val cannot be nil and must be a number.

validators.is_not_before() (opt)

Returns a validator that checks if the current time is not before the tested value within the system's leeway. This means that:

val <= (system_clock() + system_leeway).

validators.is_not_expired() (opt)

Returns a validator that checks if the current time is not equal to or after the tested value within the system's leeway. This means that:

val > (system_clock() - system_leeway).

validators.is_at() (opt)

Returns a validator that checks if the current time is the same as the tested value within the system's leeway. This means that:

val >= (system_clock() - system_leeway) and val <= (system_clock() + system_leeway).

validators.set_system_leeway(leeway)

A function to set the leeway (in seconds) used for is_not_before and is_not_expired. The default is to use 0 seconds

validators.set_system_clock(clock)

A function to set the system clock used for is_not_before and is_not_expired. The default is to use ngx.now

sample claim_spec using validators

local validators = require "resty.jwt-validators"
local claim_spec = {
    sub = validators.opt_matches("^[a-z]+$),
    iss = validators.equals_any_of({ "first", "second" }),
    __jwt = validators.require_one_of({ "foo", "bar" })
}

Legacy/Timeframe options

In order to support code which used previous versions of this library, as well as to simplify specifying timeframe-based claim_specs, you may use in place of any single claim_spec parameter a table of validation_options. The parameter should be expressed as a key/value table. Each key of the table should be picked from the following list.

When using legacy validation_options, you MUST ONLY specify these options. That is, you cannot mix legacy validation_options with other claim_spec validators. In order to achieve that, you must specify multiple options to the jwt:load/jwt:verify_jwt_obj functions.

• lifetime_grace_period: Define the leeway in seconds to account for clock skew between the server that generated the jwt and the server validating it. Value should be zero (0) or a positive integer.

  • When this validation option is specified, the process will ensure that the jwt contains at least one of the two nbf or exp claim and compare the current clock time against those boundaries. Would the jwt be deemed as expired or not valid yet, verification will fail.

  • When none of the nbf and exp claims can be found, verification will fail.

  • nbf and exp claims are expected to be expressed in the jwt as numerical values. Wouldn't that be the case, verification will fail.

  • Specifying this option is equivalent to calling:

    validators.set_system_leeway(leeway)
    

    and specifying as a claim_spec:

    {
      __jwt = validators.require_one_of({ "nbf", "exp" }),
      nbf = validators.opt_is_not_before(),
      exp = validators.opt_is_not_expired()
    }
    

• require_nbf_claim: Express if the nbf claim is optional or not. Value should be a boolean.

  • When this validation option is set to true and no lifetime_grace_period has been specified, a zero (0) leeway is implied.

  • Specifying this option is equivalent to specifying as a claim_spec:

    {
      nbf = validators.is_not_before(),
    }
    

• require_exp_claim: Express if the exp claim is optional or not. Value should be a boolean.

  • When this validation option is set to true and no lifetime_grace_period has been specified, a zero (0) leeway is implied.

  • Specifying this option is equivalent to specifying as a claim_spec:

    {
      exp = validators.is_not_expired(),
    }
    

• valid_issuers: Whitelist the vetted issuers of the jwt. Value should be a array of strings.

  • When this validation option is specified, the process will compare the jwt iss claim against the list of valid issuers. Comparison is done in a case sensitive manner. Would the jwt issuer not be found in the whitelist, verification will fail.

  • iss claim is expected to be expressed in the jwt as a string. Wouldn't that be the case, verification will fail.

  • Specifying this option is equivalent to specifying as a claim_spec:

    {
      iss = validators.equals_any_of(valid_issuers),
    }
    

sample of validation_options usage

local jwt_obj = jwt:verify(key, jwt_token,
    {
        lifetime_grace_period = 120,
        require_exp_claim = true,
        valid_issuers = { "my-trusted-issuer", "my-other-trusteed-issuer" }
    }
)

Examples

• JWT Auth With Query and Cookie
• JWT Auth With KID and Store Your Key in Redis

Back to TOC

Installation

Using Luarocks

luarocks install lua-resty-jwt

It is recommended to use the latest ngx_openresty bundle directly.

Also, You need to configure the lua_package_path directive to add the path of your lua-resty-jwt source tree to ngx_lua's Lua module search path, as in

    # nginx.conf
    http {
        lua_package_path "/path/to/lua-resty-jwt/lib/?.lua;;";
        ...
    }

and then load the library in Lua:

    local jwt = require "resty.jwt"

Back to TOC

Testing With Docker

./ci script

Back to TOC

See Also

• the ngx_lua module: http://wiki.nginx.org/HttpLuaModule

Back to TOC