tello_sim

tello_sim is a simple Python simulator (sim) that can be used by students to test their tello flight plans before deploying them to a real drone. It was inspired by the easyTello library and uses it for the drone interface.

One suggested use for the sim is to develop an in-class obstacle course for students to fly their drone through. For example, you could have designated launch and landing positions that are separated by a series of obstacles. Obstacles could include tunnels to fly through or corners to navigate around.

Depending on the skill level of the class, you can either break the class up into teams or have students work individually. Each team or student then needs to observe and measure the actual course to determine what command inputs will let them successfully fly through the course. The sim requires students to think through, develop, and test their entire flight plan via simple commands or scripts before deploying them to the real drone. When they run their simulation, it outputs some basic plots of the three dimensional paths the drone should take that can help them estimate how well their flight plan might work with the real drone.

We have included two supporting presentations in this repo in the "teaching_materials" folder. These provide an introduction to Python, simulations, and how to use this library. The "simulation_intro" presentation contains slides that can be used with students and the "simulation_teaching" presentation provides more background for educators.

After simulating their flight, they can then deploy the same code to a real drone to see how their model performs in the real world. In order to control the flight of the actual drones, the facilitator can take the output from each team or student (via the save command discussed below) and deploy it from a single computer. Students can then observe how different approaches work in the real world with the actual drone.

There will always be differences between the simulation and the actual flight which will help students think about how to evaluate their model and improve it given data from the real flight. For example, if the drone goes too high, they can adjust their command script to account for this observation.

An exercise like this supports the United States' Next Generation Science Standards for K12 related to distinguishing between a model and the actual object, process, and/or events the model represents.

The sim was developed for use in a Jupyter notebook or QT console so that the plots are displayed inline with the code print outputs. The sim currently supports a subset of the full DJI command set including: takeoff, land, forward, back, left, right, up, down, flip, cw, and ccw.

Example Jupyter Notebook

Installation

To install the library from cloned source:

$ git clone https://github.com/Fireline-Science/tello_sim
$ cd tello_sim
$ pip install .

Note: The sim requires pandas and matplotlib and is designed to be used interactively with Jupyter notebooks or QT consoles. Downloading and installing the Anaconda distribution of Python 3 is the recommended method for getting these data science packages.

Cloud Notebook Option

If you don't want to install Jupyter on your local machine, you can also use the free mybinder cloud-based Jupyter notebook service. While this service will allow you to use the simulator, you will not be able to deploy your simulated flight to a real drone given the code will be running on a remote server. We have used this in classrooms where we could not easily install Python. In this scenario, the students are able to work with the simulator in their browser and then share their final flight code with the teacher who has installed the library locally and can send it to the drone via WiFi.

Use the link below to launch the mybinder version of a Jupyter notebook and then you can open the demo notebook which is titled "drone_notebook.ipynb".

Simulator Examples

The simulator is built to run interactively in a Jupyter notebook or QT Console. The sim class outputs both text prompts and plots with each simulated command.

Creating a simulated drone object in Python:

from tello_sim import Simulator

my_drone = Simulator()

my_drone.takeoff()

my_drone.forward(40)

my_drone.cw(45)

my_drone.forward(50)

my_drone.land()

Saving and Loading Command scripts

In a classroom, it can be useful to allow students to share their command scripts or allow them to send them to a teacher which can be the gatekeeper for sending the scripts to the real drones. To facilitate that, we have two functions that allow you to save and load commands scripts. The scripts are a simple JSON document formatted as follows:

[
    {
        "command": "command",
        "arguments": []
    },
    {
        "command": "takeoff",
        "arguments": []
    },
    {
        "command": "forward",
        "arguments": [
            100
        ]
    },
    {
    	"command": "cw",
	"arguments": [
	    90
	]
    },
    {
    	"command": "forward",
	"arguments": [
	    100
	]
    },
    {
        "command": "land",
        "arguments": []
    }
]

To save the commands built up in an interactive console, do the following:

my_drone.save(file_path='save_file.json')

To load a command file, do the following. Note that the load_commands function resets your drone object, so any saved commands will be cleared.

my_drone.load_commands(file_path='new_commands.json')

Resetting Simulator States

To reset the state of your simulator for a given object, use the following:

my_drone.reset()

Deploying to a Real Drone

We are using the easytello library to allow you to deploy your simulated flight to a real drone. Once you are connected to your drone via WiFi, you can deploy the commands you built up in an interactive session or loaded via a command file in Jupyter with the following command:

my_drone.deploy()

We recommend that you spend some time experimenting with the simulator and deploying code to the drone prior to use in the classroom. The interface to the drone can experience errors when deploying commands which can generally be resolved by restarting the drone, reconnecting to the drone's WiFi network and using the library to rerun the my_drone.deploy() command. You can also set the expectation that errors do occur and are part of the general scientific process. We recommend that you refer to the Tello User Manual for general information about the drone. Of specific interest are the various LED codes which we have replicated below.

	Color	Pattern	Drone State
Normal States	Alternating red, green, and yellow	Blinking	Turning on and performing self-diagnostic tests
	Green	Periodically blinks twice	Vision positioning system active
	Yellow	Blinking slowly	Vision unavailable (usually due to low light)
Charging States	Blue	Solid	Charging is complete
	Blue	Blinking slowly	Charging
	Blue	Blinking quickly	Charging error
Warning States	Yellow	Blnking quickly	Remote control signal lost
	Red	Blnking slowly	Low battery
	Red	Blnking quickly	Critically low battery
	Red	Solid	Critical error

Running Multiple Command Scripts in the Same Session

Note: if you are running multiple scripts to the drone, you may have to kill the process that binds the python process to the Tello port if you receive a OSError: [Errno 48] Address already in use error. You can search for and kill the process as follows in a linux or MacOSX console. Replace XXXX with the process id that you see after running the lsof command.

lsof -i:8889
kill XXXX