Merge pull request #3 from dipree/feature/slim-down

Further slim down frame

README.md

@@ -1,10 +1,10 @@
 # Alpaca 🦙
-The Alpaca is a lightweight, 5", cinematic, all-round quadcopter frame with long-range capabilities designed for 20x20mm mounting pattern components. The squished x-design with a 230mm motor to motor distance gives space for clean air and stability. The front frame section is on a level with the front motors which allows to get camera shots without propellers in view.
+The Alpaca is a lightweight, 5", cinematic, all-round quadcopter frame with long-range capabilities designed for 20x20mm mounting pattern components. The squished x-design with a 225mm motor to motor distance gives space for clean air and stability. The front frame section is on a level with the front motors which allows to get camera shots without propellers in view.
 
 ![Alpaca frame render image](https://github.com/derpixeldan/alpaca/blob/master/images/alpaca-v2-render.png)
 
 ## Specifications
-* Wheelbase: 230mm (fits 5.1" propellers)
+* Wheelbase: 225mm (fits 5.1" propellers)
 * Top plate: 2mm
 * Center plate: 2mm
 * Bottom plate: 2mm
@@ -25,7 +25,7 @@ The Alpaca is a lightweight, 5", cinematic, all-round quadcopter frame with long
 * 8 x M3 press nuts to fit 4.5mm holes
 
 ## Recommended Build
-Use aluminum screws for the top and bottom plate to mount with the standoffs. The four rear holes on the top plate should be prepared for countersunk screws (this way your battery won't be damaged by the screw heads). Around 91g is the weight with half aluminum half steel hardware. The center stack should be soft-mounted, for example rubber o-rings underneath the electronic speed controller and rubber standoffs to mount the flight controller on top. There's camera plates for both Runcam and Foxeer mini size camera mounting pattern. Weight is key of this frame, take caution when adding extraneous parts.
+Use aluminum screws for the top and bottom plate to mount with the standoffs. The four rear holes on the top plate should be prepared for countersunk screws (this way the battery won't be damaged by the screw heads). Around 91g is the weight with half aluminum half steel hardware. The center stack should be soft-mounted, for example rubber o-rings underneath the electronic speed controller and rubber standoffs to mount the flight controller on top. There's camera plates for both Runcam and Foxeer mini size camera mounting pattern. Weight is key of this frame, take caution when adding extraneous parts.
 
 ## Where to get?
 Download the [latest release](https://github.com/derpixeldan/alpaca/releases/) and send the `.dxf` frame files alongside with the above [specifications](#specifications) to the carbon fiber cutting service of your choice.