Skip to content

Installation

Jump to bottom Edit New page
d1slact0r edited this page Apr 6, 2019 · 2 revisions

Enter the uboot web interface and upload the firmware.bin file, the router should reboot when the installation is finished.

To enter the uboot (Windows procedure):

  1. Connect your AR150 to the computer by plugging the ethernet on the LAN port.
  2. Press the reset button and plug the power cable while keeping the button pressed
  3. The red led should start to blink, at the sixth blink stop pressing the reset button, now the uboot is activated.
  4. Enter your network settings, go to change adapter settings and on the Ethernet interface put the following configuration on the ipv4 properties:
ip: 192.168.1.2
network mask: 255.255.255.0
  1. To enter the uboot web open Google Chrome or Mozilla Firefox and go to http://192.168.1.1 upload the file and wait for the reboot.
Add a custom footer
Add a custom sidebar
Clone this wiki locally