working profile for Creality CR 6 SE and CR 6 Max printers for Orca Slicer and The future relase of Bambu Studios. If you have installed a previous verison of this remove that folder and file from your Orcaslicer Directory Just the file and folder for this profile for Cr-6 se and Cr-6 Max How to install
- Extract the zip file
- install the file and folder to the directory that you have orcaslicer
- Don't install the folder Install Guide Images ( that is just to help you install this profile)
- Only install the follow files/folder Creality CR-6.json (File) and the Creality CR-6 (folder)
Step 1 Go to directory that you have OrcaSlicer installed to, Open that folder and you should see a folder called "resources". Open that folder
Step 2 After opening the resources folder you should see a folder called "profiles" open that folder.
Step 3 Once inside the "profiles" folder this is where you add the files and folder for the printer/printers. Copy and Paste or just move the folder called "Creality Cr-6 and the file called Creality CR-6.json.
Step 4 Open OrcaSlicer ( if it is the first time just run to the config) if not the first time click on the gear in the top left area so you can access your newly installed profiles.
Step 5 Once the profile screen popsup scroll down til you see the CR-6 profiles and put check marks in the nozzles you want to use
Thats it now you have your profiles working just use the dropdown menu for the printer profiles to access them.
Happy Printing!!!!!!