app: fixed a bunch off issues

.artela/config/app.toml

@@ -0,0 +1,333 @@
+# This is a TOML config file.
+# For more information, see https://github.com/toml-lang/toml
+
+###############################################################################
+###                           Base Configuration                            ###
+###############################################################################
+
+# The minimum gas prices a validator is willing to accept for processing a
+# transaction. A transaction's fees must meet the minimum of any denomination
+# specified in this config (e.g. 0.25token1,0.0001token2).
+minimum-gas-prices = "0aart"
+
+# The maximum gas a query coming over rest/grpc may consume.
+# If this is set to zero, the query can consume an unbounded amount of gas.
+query-gas-limit = "0"
+
+# default: the last 362880 states are kept, pruning at 10 block intervals
+# nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node)
+# everything: 2 latest states will be kept; pruning at 10 block intervals.
+# custom: allow pruning options to be manually specified through 'pruning-keep-recent', and 'pruning-interval'
+pruning = "custom"
+
+# These are applied if and only if the pruning strategy is custom.
+pruning-keep-recent = "2"
+pruning-interval = "10"
+
+# HaltHeight contains a non-zero block height at which a node will gracefully
+# halt and shutdown that can be used to assist upgrades and testing.
+#
+# Note: Commitment of state will be attempted on the corresponding block.
+halt-height = 0
+
+# HaltTime contains a non-zero minimum block time (in Unix seconds) at which
+# a node will gracefully halt and shutdown that can be used to assist upgrades
+# and testing.
+#
+# Note: Commitment of state will be attempted on the corresponding block.
+halt-time = 0
+
+# MinRetainBlocks defines the minimum block height offset from the current
+# block being committed, such that all blocks past this offset are pruned
+# from CometBFT. It is used as part of the process of determining the
+# ResponseCommit.RetainHeight value during ABCI Commit. A value of 0 indicates
+# that no blocks should be pruned.
+#
+# This configuration value is only responsible for pruning CometBFT blocks.
+# It has no bearing on application state pruning which is determined by the
+# "pruning-*" configurations.
+#
+# Note: CometBFT block pruning is dependant on this parameter in conjunction
+# with the unbonding (safety threshold) period, state pruning and state sync
+# snapshot parameters to determine the correct minimum value of
+# ResponseCommit.RetainHeight.
+min-retain-blocks = 0
+
+# InterBlockCache enables inter-block caching.
+inter-block-cache = true
+
+# IndexEvents defines the set of events in the form {eventType}.{attributeKey},
+# which informs CometBFT what to index. If empty, all events will be indexed.
+#
+# Example:
+# ["message.sender", "message.recipient"]
+index-events = []
+
+# IavlCacheSize set the size of the iavl tree cache (in number of nodes).
+iavl-cache-size = 781250
+
+# IAVLDisableFastNode enables or disables the fast node feature of IAVL. 
+# Default is false.
+iavl-disable-fastnode = false
+
+# AppDBBackend defines the database backend type to use for the application and snapshots DBs.
+# An empty string indicates that a fallback will be used.
+# The fallback is the db_backend value set in CometBFT's config.toml.
+app-db-backend = ""
+
+###############################################################################
+###                         Telemetry Configuration                         ###
+###############################################################################
+
+[telemetry]
+
+# Prefixed with keys to separate services.
+service-name = ""
+
+# Enabled enables the application telemetry functionality. When enabled,
+# an in-memory sink is also enabled by default. Operators may also enabled
+# other sinks such as Prometheus.
+enabled = true
+
+# Enable prefixing gauge values with hostname.
+enable-hostname = false
+
+# Enable adding hostname to labels.
+enable-hostname-label = false
+
+# Enable adding service to labels.
+enable-service-label = false
+
+# PrometheusRetentionTime, when positive, enables a Prometheus metrics sink.
+prometheus-retention-time  = 1000000000000
+
+# GlobalLabels defines a global set of name/value label tuples applied to all
+# metrics emitted using the wrapper functions defined in telemetry package.
+#
+# Example:
+# [["chain_id", "cosmoshub-1"]]
+global-labels = [
+]
+
+# MetricsSink defines the type of metrics sink to use.
+metrics-sink = ""
+
+# StatsdAddr defines the address of a statsd server to send metrics to.
+# Only utilized if MetricsSink is set to "statsd" or "dogstatsd".
+statsd-addr = ""
+
+# DatadogHostname defines the hostname to use when emitting metrics to
+# Datadog. Only utilized if MetricsSink is set to "dogstatsd".
+datadog-hostname = ""
+
+###############################################################################
+###                           API Configuration                             ###
+###############################################################################
+
+[api]
+
+# Enable defines if the API server should be enabled.
+enable = true
+
+# Swagger defines if swagger documentation should automatically be registered.
+swagger = false
+
+# Address defines the API server to listen on.
+address = "tcp://localhost:1317"
+
+# MaxOpenConnections defines the number of maximum open connections.
+max-open-connections = 1000
+
+# RPCReadTimeout defines the CometBFT RPC read timeout (in seconds).
+rpc-read-timeout = 10
+
+# RPCWriteTimeout defines the CometBFT RPC write timeout (in seconds).
+rpc-write-timeout = 0
+
+# RPCMaxBodyBytes defines the CometBFT maximum request body (in bytes).
+rpc-max-body-bytes = 1000000
+
+# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
+enabled-unsafe-cors = false
+
+###############################################################################
+###                           gRPC Configuration                            ###
+###############################################################################
+
+[grpc]
+
+# Enable defines if the gRPC server should be enabled.
+enable = true
+
+# Address defines the gRPC server address to bind to.
+address = "localhost:9090"
+
+# MaxRecvMsgSize defines the max message size in bytes the server can receive.
+# The default value is 10MB.
+max-recv-msg-size = "10485760"
+
+# MaxSendMsgSize defines the max message size in bytes the server can send.
+# The default value is math.MaxInt32.
+max-send-msg-size = "2147483647"
+
+###############################################################################
+###                        gRPC Web Configuration                           ###
+###############################################################################
+
+[grpc-web]
+
+# GRPCWebEnable defines if the gRPC-web should be enabled.
+# NOTE: gRPC must also be enabled, otherwise, this configuration is a no-op.
+# NOTE: gRPC-Web uses the same address as the API server.
+enable = true
+
+###############################################################################
+###                        State Sync Configuration                         ###
+###############################################################################
+
+# State sync snapshots allow other nodes to rapidly join the network without replaying historical
+# blocks, instead downloading and applying a snapshot of the application state at a given height.
+[state-sync]
+
+# snapshot-interval specifies the block interval at which local state sync snapshots are
+# taken (0 to disable).
+snapshot-interval = 2000
+
+# snapshot-keep-recent specifies the number of recent snapshots to keep and serve (0 to keep all).
+snapshot-keep-recent = 2
+
+###############################################################################
+###                              State Streaming                            ###
+###############################################################################
+
+# Streaming allows nodes to stream state to external systems.
+[streaming]
+
+# streaming.abci specifies the configuration for the ABCI Listener streaming service.
+[streaming.abci]
+
+# List of kv store keys to stream out via gRPC.
+# The store key names MUST match the module's StoreKey name.
+#
+# Example:
+# ["acc", "bank", "gov", "staking", "mint"[,...]]
+# ["*"] to expose all keys.
+keys = []
+
+# The plugin name used for streaming via gRPC.
+# Streaming is only enabled if this is set.
+# Supported plugins: abci
+plugin = ""
+
+# stop-node-on-err specifies whether to stop the node on message delivery error.
+stop-node-on-err = true
+
+###############################################################################
+###                         Mempool                                         ###
+###############################################################################
+
+[mempool]
+# Setting max-txs to 0 will allow for a unbounded amount of transactions in the mempool.
+# Setting max_txs to negative 1 (-1) will disable transactions from being inserted into the mempool (no-op mempool).
+# Setting max_txs to a positive number (> 0) will limit the number of transactions in the mempool, by the specified amount.
+#
+# Note, this configuration only applies to SDK built-in app-side mempool
+# implementations.
+max-txs = -1
+
+###############################################################################
+###                             EVM Configuration                           ###
+###############################################################################
+
+[evm]
+
+# Tracer defines the 'vm.Tracer' type that the EVM will use when the node is run in
+# debug mode. To enable tracing use the '--evm.tracer' flag when starting your node.
+# Valid types are: json|struct|access_list|markdown
+tracer = ""
+
+# MaxTxGasWanted defines the gas wanted for each eth txs returned in ante handler in check txs mode.
+max-txs-gas-wanted = 0
+
+###############################################################################
+###                           JSON RPC Configuration                        ###
+###############################################################################
+
+[json-rpc]
+
+# Enable defines if the gRPC server should be enabled.
+enable = true
+
+# Address defines the EVM RPC HTTP server address to bind to.
+address = "0.0.0.0:8545"
+
+# Address defines the EVM WebSocket server address to bind to.
+ws-address = "127.0.0.1:8546"
+
+# API defines a list of JSON-RPC namespaces that should be enabled
+# Example: "eth,txpool,personal,net,debug,web3"
+api = "eth,net,web3"
+
+# GasCap sets a cap on gas that can be used in eth_call/estimateGas (0=infinite). Default: 25,000,000.
+gas-cap = 25000000
+
+# EVMTimeout is the global timeout for eth_call. Default: 5s.
+evm-timeout = "5s"
+
+# TxFeeCap is the global txs-fee cap for send txs. Default: 1eth.
+txfee-cap = 1
+
+# FilterCap sets the global cap for total number of filters that can be created
+filter-cap = 200
+
+# FeeHistoryCap sets the global cap for total number of blocks that can be fetched
+feehistory-cap = 100
+
+# LogsCap defines the max number of results can be returned from single 'eth_getLogs' query.
+logs-cap = 10000
+
+# BlockRangeCap defines the max block range allowed for 'eth_getLogs' query.
+block-range-cap = 10000
+
+# HTTPTimeout is the read/write timeout of http json-rpc server.
+http-timeout = "30s"
+
+# HTTPIdleTimeout is the idle timeout of http json-rpc server.
+http-idle-timeout = "2m0s"
+
+# AllowUnprotectedTxs restricts unprotected (non EIP155 signed) transactions to be submitted via
+# the node's RPC when the global parameter is disabled.
+allow-unprotected-txs = true
+
+# MaxOpenConnections sets the maximum number of simultaneous connections
+# for the server listener.
+max-open-connections = 0
+
+# EnableIndexer enables the custom txs indexer for the EVM (ethereum transactions).
+enable-indexer = false
+
+# MetricsAddress defines the EVM Metrics server address to bind to. Pass --metrics in CLI to enable
+# Prometheus metrics path: /debug/metrics/prometheus
+metrics-address = "127.0.0.1:6065"
+
+# Upgrade height for fix of revert gas refund logic when txs reverted.
+fix-revert-gas-refund-height = 0
+
+###############################################################################
+###                             TLS Configuration                           ###
+###############################################################################
+
+[tls]
+
+# Certificate path defines the cert.pem file path for the TLS configuration.
+certificate-path = ""
+
+# Key path defines the key.pem file path for the TLS configuration.
+key-path = ""
+
+###############################################################################
+###                            Aspect Configuration                         ###
+###############################################################################
+[aspect]
+apply-pool-size = 0
+query-pool-size = 0

.artela/config/client.toml

@@ -0,0 +1,21 @@
+# This is a TOML config file.
+# For more information, see https://github.com/toml-lang/toml
+
+###############################################################################
+###                           Client Configuration                            ###
+###############################################################################
+
+# The network chain ID
+chain-id = "artroll_11820-1"
+
+# The keyring's backend, where the keys are stored (os|file|kwallet|pass|test|memory)
+keyring-backend = "test"
+
+# CLI output format (text|json)
+output = "text"
+
+# <host>:<port> to CometBFT RPC interface for this chain
+node = "tcp://localhost:26657"
+
+# Transaction broadcasting mode (sync|async)
+broadcast-mode = "sync"