- Table of Contents
- Run TNF, Chart-Verifier and Preflight Using DCI
- Purpose of this Repository
- Pre-requisites
- Build DCI container image with dci's requirements and preflight binary inside the image
- Build DCI container image with dci's requirements only
- Prepare and Deploy DCI Container using helm chart
- Run TNF Test Suite, Helm Chart-Verifier and Preflight Manual
- Start DCI runner TNF, Chart-Verifier and Preflight
- How To Use DCI To Run Container With Podman From a Host
- Tips And Troubleshooting
- License
- Contact
The main purpose of this repository is solely to show how to use DCI as centralize tool to run the following certification tools:
- TNF Test Suite Certification
- Helm Chart-verifier
- Preflight to scan the image for CVE and security checking
The main benefit is to use DCI as centralize interface for partner to run all certification tests and push all test log/results, capture CNF and OCP platform info back to DCI control server that leverage the powerful CI feature of DCI and simplify certification test for partner,
Additional, this respository will aim to show how to use DCI to run above 3 main certification tools not just on traditional helper node or VM but also to do the demostration how to use DCI to run these 3 certificaiton tests inside a Kubernetes Container. With this method you don't need to install DCI, preflight and helm chart requirements RPMs or libraries since they are already prepared/installed them inside the Dockerfile. It will also simplify the test procedures and easy to customize the parameters for each partner and easier troubleshooting for tool issues.
In matter of facts, it has an extra benefits, for example, the user can also a perform a scale out and deploy additional PODs in seconds to run DCI testing for different application on same or different clusters.
Finally, this repository is also given the original manual methods of how to run these 3 certification testing tools without using DCI tool for references/troubleshooting purpose.
Note: dci-runner.sh is made by David Rabkin, it is used to collect all components version info as dci_tags and push back to DCI control server, along with other test results and logs and displayed under the DCI job WEB GUI.
The source code can be found in here: https://github.com/dci-labs/nokia-cmm-tnf-config/blob/main/dci-runner.sh
- One OAM subnet for secondary POD interface to reach https://www.distributed-ci.io as using for results/logs submission
- An Openshift cluster either SNO or Compact/Hub Cluster
- An account that can access to ci.io with DCI client-id and secrets https://www.distributed-ci.io/remotecis
- An real CNF application or a test-app that need to label them specifically and update to settings.yml
- Helm Chart testing needs to have a helmchart repository with index release if enable-helm-chart-testing
Example-of-helm-chart-release
Or Check out this document I made Instruction-how-add-helm-chart-to-github
Or this more harder way original we used Using CR tooling
NOTE Make sure you build the image in a RHEL8 host subscribed to the following Red Hat Repositories:
- rhel-8-for-x86_64-appstream-rpms
- rhel-8-for-x86_64-baseos-rpms
- ansible-2.9-for-rhel-8-x86_64-rpms
+ git clone https://github.com/redhat-openshift-ecosystem/openshift-preflight.git
+ podman build -t dci-container-tpc:v6 -f ./Dockerfile-WithPreflight
+ podman tag dci-container-tpc:v6 quay.io/avu0/dci-container-tpc:v6
+ podman push quay.io/avu0/dci-container-tpc:v6+ podman build -t dci-container-tpc:v5 -f ./Dockerfile
+ podman tag dci-container-tpc:v5 quay.io/avu0/dci-container-tpc:v5
+ podman push quay.io/avu0/dci-container-tpc:v5global:
imagePullSecrets:
enabled: false
name: art-regcred
nodeselector:
enabled: false
key: dci
value: container
repository: quay.io/avu0
imagecredential:
registry: quay.io
username: avu0
password: vkc8O9xxmM435IeqhkBb
image:
dcipreflight:
imgname: dci-container-tpc
tag: v5
pullPolicy: IfNotPresent
nameOverride: ""
fullnameOverride: ""
hook_delete_policy: "hook-failed"
serviceAccount:
name: "dci-container-sa"
KubeConf:
kubeconfig: "/var/lib/dci-openshift-app-agent/kubeconfig" #must copy kubeconfig to this path from start-dci-container-runner.sh
Proxy:
enabled: false
http_proxy: "http://135.xx.48.34:8000"
https_proxy: "http://135.xx.48.34:8000"
no_proxy: "135.xx.247.0/24,xxyylab.com"
dcinetipvlan:
name: ipvlan
hostDevice: eno6
type: static
cidr: 192.168.30.0/27
allocationPoolStartIp: 192.168.30.20
allocationPoolEndIp: 192.168.30.21
routes:
- dst: 172.168.20.0/24
gw: 192.168.30.1
securityContext:
privileged: true
capabilities:
#add: ["NET_ADMIN","NET_RAW","SYS_ADMIN"]
resources:
limits:
cpu: 4
memory: 4Gi
requests:
cpu: 2
memory: 2Gi- Helm Chart Values Modification Options
- ServiceAccount name and namespace must be used same name on step when add SCC privileged.
- Adjust resources limits/requests of CPU and Memory according to your application SIZE.
- Test TNF Cert with 40 PODs, CPU reached 1200mc(1.2vCPU) and Memory had reached to 1Gi.
- NodeSelector that allow kubernetes to deploy DCI container on specific node true/false.
- ImagePullSecret is enabled when you have a private registry server that need to be authenticated.
+ oc create namespace dci
+ oc adm policy add-scc-to-user privileged system:serviceaccount:dci:dci-container-sa+ oc get no -o NAME | cut -d/ -f2|xargs -I V oc label node V dci=container+ tree dci-container/
dci-container/
├── Chart.yaml
├── templates
│ ├── createdci-pdb.yaml
│ ├── deployment.yaml
│ ├── _helpers.tpl
│ ├── ImagePullSecret.tpl
│ ├── ImageRepoPullSecret.yaml
│ ├── ipvlan.yaml
│ └── serviceaccount.yaml
└── values.yaml
- ---------------------------------------------------------------------------------------------------------------------------------
+ helm install dci dci-container/ -n dci --wait
+ helm ls -n dci
NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION
dci dci 1 2022-07-13 15:26:29.697521572 -0500 CDT deployed dci-container-0.1.0
+ oc get po -n dci
NAME READY STATUS RESTARTS AGE
dci-dci-container-7b9669f68d-pxwf4 1/1 Running 0 3m55s
+ oc exec -it dci-dci-container-7b9669f68d-pxwf4 -- bash -n dci
[root@dci-dci-container-7b9669f68d-pxwf4 /]# ip a
3: eth0@if16698: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1400 qdisc noqueue state UP group default
link/ether 0a:58:0a:84:00:68 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 10.132.0.104/23 brd 10.132.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::858:aff:fe84:68/64 scope link
valid_lft forever preferred_lft forever
4: net1@if9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 94:40:c9:c1:eb:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.30.20/27 brd 192.168.30.31 scope global net1
valid_lft forever preferred_lft forever
inet6 fe80::9440:c900:6c1:eb69/64 scope link
valid_lft forever preferred_lft forever
[root@dci-dci-container-7b9669f68d-pxwf4 /]# ping 192.168.30.1 -c3
PING 192.168.30.1 (192.168.30.1) 56(84) bytes of data.
64 bytes from 192.168.30.1: icmp_seq=1 ttl=64 time=0.493 ms
64 bytes from 192.168.30.1: icmp_seq=2 ttl=64 time=0.393 ms
64 bytes from 192.168.30.1: icmp_seq=3 ttl=64 time=0.365 ms/etc/dci-openshift-app-agent
── dcirc.sh ---> contents of https://www.distributed-ci.io/remotecis
├── dcirc.sh.dist
├── hooks
│ ├── install.yml (--- dummy)
│ ├── post-run.yml
│ ├── pre-run.yml
│ ├── teardown.yml
│ └── tests.yml
├── hosts.yml
└── settings.yml ---> Each test type has different contents e.g. chart-verifier, preflight and TNF Cert
Other Files:
ls -1 /var/lib/dci-openshift-app-agent/
auth.json
dci-runner.sh
helm-charts-cmm.yml
kubeconfig
pyxis-apikey.txt- if there are more users need to test for different CNF application
we can scale out additional DCI Container PODs if NAD has a range of more than one IP Addreses
+ oc scale Deployment/dci-dci-container --replicas=2 -n dci
deployment.apps/dci-dci-container scaled
+ oc get po -n dci
NAME READY STATUS RESTARTS AGE
dci-dci-container-7b9669f68d-pxwf4 1/1 Running 0 42h
dci-dci-container-7b9669f68d-pzfj4 1/1 Running 0 12s
- ---------------------Second DCI Container PODs created in less 2s-------------------------------
+ oc exec -it dci-dci-container-7b9669f68d-pzfj4 -n dci -- bash -c 'ip a'
4: net1@if9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 94:40:c9:c1:eb:69 brd ff:ff:ff:ff:ff:ff
inet 192.168.30.21/27 brd 192.168.30.31 scope global net1
valid_lft forever preferred_lft forever
inet6 fe80::9440:c900:7c1:eb69/64 scope link
valid_lft forever preferred_lft forever
+ oc exec -it dci-dci-container-7b9669f68d-pzfj4 -n dci -- bash -c 'ping -I net1 192.168.30.1'
PING 192.168.30.1 (192.168.30.1) from 192.168.30.21 net1: 56(84) bytes of data.
64 bytes from 192.168.30.1: icmp_seq=1 ttl=64 time=3.68 ms
64 bytes from 192.168.30.1: icmp_seq=2 ttl=64 time=0.329 ms - Using Podman
+ podman run --rm --network host -v /root/openshift/install_dir/auth/kubeconfig:/usr/tnf/kubeconfig/config:Z -v /root/certification_6/test-network-function-main/test-network-function:/usr/tnf/config:Z -v /root/certification_6/output_lifecycle:/usr/tnf/claim:Z -e KUBECONFIG=/usr/tnf/kubeconfig/config -e TNF_MINIKUBE_ONLY=false -e TNF_NON_INTRUSIVE_ONLY=false -e TNF_DISABLE_CONFIG_AUTODISCOVER=false -e TNF_PARTNER_NAMESPACE=npv-cmm-34 -e LOG_LEVEL=debug -e PATH=/usr/bin:/usr/local/oc/bin quay.io/testnetworkfunction/cnf-certification-test:v4.0.2 - Using Container Shellscript(Podman as default)
- Example of TNF CONFIG
Make sure you have a targetNameSpaces tnf or any other Namespace with PODs are running
- Example of TNF CONFIG
targetNameSpaces:
- name: dci
targetPodLabels:
- prefix:
name: app
value: dci-container
targetCrdFilters:
- nameSuffix: "group1.test.com"
- nameSuffix: "test-network-function.com"
certifiedcontainerinfo:
- name: nginx-116 # working example
repository: rhel8
certifiedoperatorinfo:
- name: etcd
organization: community-operators # working example- TNF Directory Structure
tree tnf/
tnf/
├── claim
├── config
│ └── tnf_config.yml
├── kubeconfig.westd1
├── output
│ ├── claim.json
│ └── cnf-certification-tests_junit.xml
└── tnf_config.yml+ ./run-tnf-container.sh -k ~/.kube/config -t ~/tnf/config -o ~/tnf/output -f networking access-control -s access-control-host-resource-PRIVILEGED_POD
+ ./run-tnf-container.sh -i quay.io/testnetworkfunction/cnf-certification-test:v4.0.2 -o ~/tnf/output/ -k ~/tnf/config/kubeconfig.westd1 -t ~/tnf/config -f platform-alteration- TNF Cert Links
https://github.com/test-network-function/cnf-certification-test#general-tests
https://redhat-connect.gitbook.io/openshift-badges/badges/cloud-native-network-functions-cnf
- Check current-context belong to your CNF Namespace
- Edit the kubeconfig then search current-context and update to your CNF application namespace
- Or use oc config cmd, so if current-context name is not YOURs, then do following:
#Check Current-Context#
oc config current-context
mvnr-du/api-nokiavf-hubcluster-1-lab-eng-cert-redhat-com:6443/system:admin
#Current-context is NOT avachart#
#Get a list of contexts and search for CNF Namespace#
oc config get-contexts |grep avachart
CURRENT NAME CLUSTER AUTHINFO NAMESPACE
admin nokiavf admin
* avachart/api-nokiavf-hubcluster-1-lab-eng-cert-redhat-com:6443/system:admin api-nokiavf-hubcluster-1-lab-eng-cert-redhat-com:6443 system:admin/api-nokiavf-hubcluster-1-lab-eng-cert-redhat-com:6443 avachart
#set current-context as in your Namespace#
oc config use-context avachart/api-nokiavf-hubcluster-1-lab-eng-cert-redhat-com:6443/system:admin- Example of run chart-verifier from podman
podman run -e KUBECONFIG=/ava/kubeconfig.sno -v ${PWD}:/ava:Z \
--rm quay.io/redhat-certification/chart-verifier verify /ava/samplechart \
--config /ava/config.yaml -F /ava/values.yamlExample of running chart-verifier from binary(chart-verifier with set values)
BUILD_ID="avachart"
NAMESPACE="avachart"
RELEASE=""
./chart-verifier \
verify \
--set chart-testing.buildId=${BUILD_ID} \
--set chart-testing.upgrade=false \
--set chart-testing.skipMissingValues=true \
--set chart-testing.namespace=${NAMESPACE} \
--set chart-testing.releaseLabel="app.kubernetes.io/instance" \
samplechartExample of running chart-verifier from binary(chart-verifier with --config option)
config.yaml:
chart-testing:
buildId: avachart
upgrade: false
skipMissingValues: true
namespace: avachart
releaseLabel: "app.kubernetes.io/instance"
release: 0.1.2 #or 0.1.2-1, 0.1.2-p1 but no CAP on letterNote: The release parameter is very tricky/picky it based on this REGEX:
^[a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*$./chart-verifier verify --config config.yaml samplechart-0.1.2.tgzMore example of options/arguments can be found in these links:
Chart-Verifier homepage: chart-verifier. More Options and examples:
chart-verifier-opions
WARNING on Chart-verifier Cache/chart-verifier
Note: So sometime you updated or modified something on the helm chart, when you re-run the test, it takes the old info from previous data
that is from this directory the ~/.cache/chart-verifier/.
To avoid this issue, you can delete these contents under ~/.cache/chart-verifier/.
ls -1 ~/.cache/chart-verifier/
samplechart
samplechart_0_1_2_tgz- Run Preflight on Helper Node/VM
+ preflight check container quay.io/redhatcerti/cnf-container1:22.5.0 --certification-project-id container-project-id --pyxis-api-token your-partner-account-api-token -d /var/lib/dci-openshift-app-agent/auth.json- Similarly Run Preflight Inside Container
[root@dci-chart-dci-container-f779b9b6-zt6xn /]#
+ preflight check container quay.io/redhatcerti/cnf-operator:22.5.0 --certification-project-id container-project-id --pyxis-api-token your-partner-account-api-token -d /root/auth.jsonMore Options from Preflight Main Site
https://github.com/redhat-openshift-ecosystem/openshift-preflight
Note: Using DCI to run preflight with container image is not supported and the function was removed During the test.
DCI Developer team had added the feature back to support DCI to run with Preflight on container image as described on this Jira
https://issues.redhat.com/browse/CILAB-685
./start-dci-container-runner.sh
------------------------------------------------------------------------------------------------------------------------
Usage: bash ./start-dci-container-runner.sh -ns|--namespace <dci_ns> -tt|--type <PREFLIGHT|TNF|CHART> -pn|--podname <dci_container> -sk|--skip-copy <yes|no> -sf|--setting <filename.yml>
Usage: bash ./start-dci-container-runner.sh [-h | --help]
Usage ex: bash ./start-dci-container-runner.sh --namespace dci --type CHART --podname dci-dci-container-xxxxx --settings-tnf.yml --skip-copy yes/no
bash ./start-dci-container-runner.sh --namespace dci --type PREFLIGHT --podname dci-dci-container-xxxxx --settings-tnf.yml
--setting --- if not specified settings-xx.yml, it will use default settings.yml, otherwise it will rename to settings.yml.
--skip-copy --- default is no, it always needs to copy those requirement files to DCI Container POD.
--type --- CHART(chart-verifier), PREFLIGHT and TNF(TNF Test Cert). It can be lower case.
--namespace --- Namespace of the dci container POD
--podname --- Pod name where dci openshift agent is installed
--help --- Usage of the ./start-dci-container-runner.sh
------------------------------------------------------------------------------------------------------------------------- Settings Contents for Preflight
---
dci_topic: OCP-4.9
dci_name: TestPreflightFromDCIContainer
dci_configuration: Run Preflight container image from DCI
#do_preflight_tests: true
preflight_test_certified_image: true
partner_creds: "/var/lib/dci-openshift-app-agent/auth.json"
preflight_containers_to_certify:
- container_image: "quay.io/redhatcerti/cnf-operator:22.5.0"
pyxis_container_identifier: "628b8f2819e6793741575dxx"
pyxis_apikey_path: "/var/lib/dci-openshift-app-agent/pyxis-apikey.txt"Note: To skip image submission to catalog/connect.redhat.com, please comment out those pyxis parameters If there are more than one container images to be tested, the add more '- container_image' under preflight_containers_to_certify
- Files structure Of Preflight
tree dci-container-with-preflight
dci-container-with-preflight
├── auth.json
├── dcirc.sh
├── dci-runner.sh
├── install.yml
├── kubeconfig
├── pyxis-apikey.txt
├── settings-preflight-container-image.yml
├── settings-preflight-operator.yml
├── settings.yml
├── start-dci-container-runner.sh- Start DCI Container Runner to test Preflight Container Image with Submission
+ bash start-dci-container-runner.sh --namespace dci --type PREFLIGHT --podname dci-dci-container-7b9669f68d-pxwf4
Already on project "dci" on server "https://api.nokiavf.hubcluster-1.lab.eng.cert.redhat.com:6443".
22/07/15 15:17:16 INFO : Copying settings.yml, install.yml, dci-runner.sh, dcirc.sh and kubeconfig and other files for Preflight/HelmChart to to dci-dci-container-7b9669f68d-pxwf4
22/07/15 15:17:27 INFO : Start DCI Container Runner for PREFLIGHT Test Type...........
20220715-20:17:28 Uses resource /etc/dci-openshift-app-agent/dcirc.sh.
......TASK [Final step] ******************************************************************************************************************************************************
ok: [jumphost] => {
"msg": "The job is now finished. Review the log at: https://www.distributed-ci.io/jobs/a9ed6107-4446-4d6f-8635-dfa2b2fa69d5/jobStates"
}
PLAY RECAP *******************************************************************************************************************************************************
jumphost : ok=114 changed=36 unreachable=0 failed=0 skipped=32 rescued=0 ignored=1 
Note: On a connected environment, index_image parameter is MANDATORY!
- Settings Contents for Preflight Operator Bundle Images
---
dci_topic: OCP-4.9
dci_name: TestPreflight Operator Bundle Image Using DCI
dci_configuration: Run Preflight Operator Bundle Image from DCI
partner_creds: "/var/lib/dci-openshift-app-agent/auth.json"
do_preflight_tests: true
#preflight_test_certified_image: true
preflight_operators_to_certify:
- bundle_image: "quay.io/opdev/simple-demo-operator-bundle:v0.0.6"
index_image: "quay.io/opdev/simple-demo-operator-catalog:v0.0.6"
# https://connect.redhat.com/projects/628b8f2819e6793741575daa/overview
#pyxis_container_identifier: "628b8f2819e6793741575daa"
# To generate it: connect.redhat.com -> Product certification -> Container API Keys -> Generate new key
#pyxis_apikey_path: "/var/lib/dci-openshift-app-agent/pyxis-apikey.txt"-
When Testing Preflight with Operator Bundle image
The CNF operator image must be compiled as Bundle and reference indices to other images. -
Partner should follow this procedure Build-Operator-Bundle-Image
-
Start DCI Container Runner to test Preflight Operator Bundle Image
+ bash start-dci-container-runner.sh --namespace dci --type PREFLIGHT --podname dci-dci-container-7b9669f68d-pxwf4
22/07/19 16:16:24 INFO : Copying pyxis-apikey.txt and auth.json files to dci-dci-container-f5755784-mxs44:/var/lib/dci-openshift-app-agent
22/07/19 16:16:28 INFO : Copying settings.yml, install.yml, dci-runner.sh, dcirc.sh and kubeconfig to dci-dci-container-f5755784-mxs44:/etc/dci-openshift-app-agent/
22/07/19 16:16:35 INFO : Start DCI Container Runner for PREFLIGHT Testing Type....
20220719-21:16:36 Uses resource /etc/dci-openshift-app-agent/dcirc.sh.TASK [Final step] **************************************************************
ok: [jumphost] => {
"msg": "The job is now finished. Review the log at: https://www.distributed-ci.io/jobs/ab979a84-8c32-4809-932e-37988aecf15c/jobStates"
}
PLAY RECAP *********************************************************************
jumphost : ok=187 changed=69 unreachable=0 failed=0 skipped=47 rescued=0 ignored=4 
- Links for more options of using DCI to Run Preflight
https://github.com/redhat-cip/dci-openshift-app-agent/blob/master/roles/preflight/README.md
https://github.com/redhat-openshift-ecosystem/openshift-preflight/blob/main/docs/RECIPES.md https://github.com/redhat-cip/dci-openshift-app-agent/tree/master/roles/preflight#operator-end-to-end-certification
- Settings Contents for Chart-Verifier
settings.yml:
---
dci_topic: OCP-4.9
dci_name: TestDCIWithChart-Verifier
dci_configuration: DCI Chart-verifier
dci_openshift_app_image: quay.io/testnetworkfunction/cnf-test-partner:latest
do_chart_verifier: true
dci_openshift_app_ns: avachart
dci_teardown_on_success: false
dci_disconnected: false- Helm Config for Chart-Verifier
helm_config.yaml:
---
dci_topic: OCP-4.9
dci_name: TestDCIWithChart-Verifier SampleChart
dci_configuration: DCI Chart-verifier SampleChart
dci_openshift_app_image: quay.io/testnetworkfunction/cnf-test-partner:latest
do_chart_verifier: true
dci_openshift_app_ns: avachart
dci_teardown_on_success: false
dci_disconnected: false
partner_name: telcoci SampleChart
partner_email: [email protected]
github_token_path: "/opt/cache/token.txt"
dci_charts:
-
name: sameplechart2
chart_file: https://github.com/ansvu/samplechart2/releases/download/samplechart-0.1.3/samplechart-0.1.3.tgz
#chart_values: https://github.com/ansvu/samplechart2/releases/download/samplechart-0.1.3/values.yaml
#install: true
deploy_chart: true
create_pr: false- Files structure of Chart-Verifier
tree dci-container-with-preflight
dci-container-with-preflight
├── dcirc.sh
├── dci-runner.sh
├── install.yml
├── kubeconfig
├── settings.yml
├── helm_config.yaml
├── github_token.txt
├── start-dci-container-runner.sh- Start DCI Container Runner to test Chart-Verifier
+ bash start-dci-container-runner.sh --namespace dci --type CHART --podname dci-dci-container-7b9669f68d-pxwf4TASK [Final step] **************************************************************
ok: [jumphost] => {
"msg": "The job is now finished. Review the log at: https://www.distributed-ci.io/jobs/5f4f67e5-d641-4432-86fe-92eb5a3dcf5b/jobStates"
}
PLAY RECAP *********************************************************************
jumphost : ok=113 changed=37 unreachable=0 failed=0 skipped=37 rescued=0 ignored=1 
- Links for more options of using DCI to Run Chart-Verifier
https://github.com/redhat-cip/dci-openshift-app-agent/blob/master/roles/chart-verifier/README.md
https://github.com/redhat-certification/chart-verifier/blob/main/docs/helm-chart-checks.md#run-helm-chart-checks
https://github.com/redhat-certification/chart-verifier
- Settings Contents for TNF Test Suite
---
dci_topic: OCP-4.9
dci_name: Test TNF v4.0.2 Using DCI DU
dci_configuration: Test TNF Certs Using DCI inside a container du
do_cnf_cert: true
dci_openshift_app_image: quay.io/testnetworkfunction/cnf-test-partner:latest
tnf_suites: >-
lifecycle
access-control
networking
observability
platform-alteration
affiliated-certification
tnf_postrun_delete_resources: false
dci_openshift_app_ns: mvn-du
dci_teardown_on_success: false
tnf_log_level: trace
dci_disconnected: false
tnf_config:
- namespace: mvn-du
targetpodlabels:
- app=du
operators_regexp:
exclude_connectivity_regexp:
test_network_function_version: v4.0.2- Files structure of Chart-Verifier
tree dci-container-with-preflight
dci-container-with-preflight
├── dcirc.sh
├── dci-runner.sh
├── install.yml
├── kubeconfig
├── settings.yml
├── start-dci-container-runner.sh- Start DCI Container Runner to test TNF Certification
+ bash start-dci-container-runner.sh --namespace dci --type TNF --podname dci-dci-container-7b9669f68d-pxwf4TASK [Final step] **************************************************************
ok: [jumphost] => {
"msg": "The job is now finished. Review the log at: https://www.distributed-ci.io/jobs/30a016b8-2300-46c3-87f8-30e827f51102/jobStates"
}
PLAY RECAP *********************************************************************
jumphost : ok=216 changed=90 unreachable=0 failed=0 skipped=50 rescued=0 ignored=1 
- Links for more options of using DCI to Run TNF Test Suite
https://github.com/redhat-cip/dci-openshift-app-agent/tree/master/roles/cnf-cert
https://github.com/test-network-function/cnf-certification-test https://github.com/test-network-function/cnf-certification-test#general-tests
In case if partners/users don't have enough OCP resources, this method can help to use a prepared DCI Container Image and using podman to run from a jumpsthost or any VM helpers. It will use --net=host, so DCI Agent can reach Host External connectivity to reach Remote Ci Job GUI or other links for toolings.
Note: Once you go inside with podman exec, the DCI files structure and contents of settings.yml/other files can be re-used same!
- From JumpHost or VM Helper and Pull DCI Container Image
+ podman pull quay.io/avu0/dci-container-tpc:v5- Podman Run DCI container image
+ podman run --net=host --privileged -d dci-container-tpc:v5 sleep infinity- Verify the podman run from the host
+ podman exec -it 30aefd785a16 bash or podman exec -it dci-container-tpc bash
+ su - dci-openshift-app-agent
+ ls -lrt /var/lib/dci-openshift-app-agent/
drwxr-xr-x. 5 dci-openshift-app-agent dci-openshift-app-agent 70 Aug 2 21:44 samples
+ [dci-openshift-app-agent@rack1-jumphost ~]$ ls -lrt /etc/dci-openshift-app-agent/
-rw-r--r--. 1 root root 326 Aug 1 13:56 settings.yml
-rw-r--r--. 1 root root 70 Aug 1 13:56 hosts.yml
-rw-r--r--. 1 root root 187 Aug 1 13:56 dcirc.sh.dist
drwxr-xr-x. 2 root root 82 Aug 2 21:44 hooks- Start Run DCI Runner with Podman From Outside
ls -1 ava-test/
auth.json
dcirc.sh
dci-runner.sh
install.yml
kubeconfig
pyxis-apikey.txt
settings-preflight-container-image.yml
settings-tnf.yml
start-dci-runner-podman.sh+ bash start-dci-runner-podman.sh --setting settings-tnf.yml --type tnf --con-name 30aefd785a16
+ bash start-dci-runner-podman.sh --setting settings-preflight-container-image.yml --type preflight --con-name 30aefd785a16
+ bash start-dci-runner-podman.sh --setting settings-helm-chart.yml --type chart --con-name 30aefd785a16- Traditional Method (Non-DCI Container)
+ sudo dnf upgrade --refresh --repo dci -y- DCI Container
- Just need to re-build Dockerfile, then new DCI Repo will be upgraded
- Ansible 2.9 Install
- Ansible Error
Deprecation warnings can be disabled by setting deprecation_warnings=False in ansible.cfg.
[WARNING]: Skipping plugin (/usr/share/dci/callback/dci.py) as it seems to be invalid: No module named 'dciauth'
ERROR! Unexpected Exception, this is probably a bug: No module named 'dciauth'- Remove any ansible version > 2.9 (ansible-core) from DNF or PIP
+ sudo pip3 uninstall ansible-core
+ sudo dnf remove ansible
+ sudo dnf -y install ansible --enablerepo=ansible-2.9-for-rhel-8-x86_64-rpms --disablerepo=epel- Downloading Metadata for Repository Error
Errors during downloading metadata for repository 'rhel-8-for-x86_64-appstream-rpms':
- Curl error (58): Problem with the local SSL certificate for https://cdn.redhat.com/content/dist/rhel8/8/x86_64/appstream/os/repodata/repomd.xml [could not load PEM client certificate, OpenSSL error error- Solution
sudo dnf clean all
sudo rm -r /var/cache/dnfNote: For DCI Container Dockerfile, it takes care automatically.
- When Test Preflight with issue occurr, there is no details log
- Error:
ERROR: fatal: [jumphost]: FAILED! => {"censored": "the output has been hidden due to the fact that 'no_log: true' was specified for this result"}- Enable no_log from Ansible Test Preflight Check Container
+ Edit /usr/share/dci-openshift-app-agent/roles/preflight/tasks/test_preflight_check_container_binary.yml
+ no_log: true ---> #no_log: true
+ https://github.com/redhat-cip/dci-openshift-app-agent/blob/master/roles/preflight/tasks/test_preflight_check_container_binary.yml#L24Note: For no_log enabling, it depends on which TASK phase and catagory of that error occurred, then go to that file and update this no_log parameter accordingly.
Apache License, Version 2.0 (see LICENSE file)
Email: Distributed-CI Team [email protected]
Email: [email protected] or [email protected] for any issue related when using DCI to test/run inside a container